Author: Kenneth Morgan
Publisher:
ISBN:
Category : Thermal oil recovery
Languages : en
Pages :

Get Book Here

Book Description

Author: Zhouyuan Zhu
Publisher: Stanford University
ISBN:
Category :
Languages : en
Pages : 237

Get Book Here

Book Description
Simulating thermal processes is usually computationally expensive because of the complexity of the problem and strong nonlinearities encountered. In this work, we explore novel and efficient simulation techniques to solve thermal enhanced oil recovery problems. We focus on two major topics: the extension of streamline simulation for thermal enhanced oil recovery and the efficient simulation of chemical reaction kinetics as applied to the in-situ combustion process. For thermal streamline simulation, we first study the extension to hot water flood processes, in which we have temperature induced viscosity changes and thermal volume changes. We first compute the pressure field on an Eulerian grid. We then solve for the advective parts of the mass balance and energy equations along the individual streamlines, accounting for the compressibility effects. At the end of each global time step, we account for the nonadvective terms on the Eulerian grid along with gravity using operator splitting. We test our streamline simulator and compare the results with a commercial thermal simulator. Sensitivity studies for compressibility, gravity and thermal conduction effects are presented. We further extended our thermal streamline simulation to steam flooding. Steam flooding exhibits large volume changes and compressibility associated with the phase behavior of steam, strong gravity segregation and override, and highly coupled energy and mass transport. To overcome these challenges we implement a novel pressure update along the streamlines, a Glowinski scheme operator splitting and a preliminary streamline/finite volume hybrid approach. We tested our streamline simulator on a series of test cases. We compared our thermal streamline results with those computed by a commercial thermal simulator for both accuracy and efficiency. For the cases investigated, we are able to retain solution accuracy, while reducing computational cost and gaining connectivity information from the streamlines. These aspects are useful for reservoir engineering purposes. In traditional thermal reactive reservoir simulation, mass and energy balance equations are solved numerically on discretized reservoir grid blocks. The reaction terms are calculated through Arrhenius kinetics using cell-averaged properties, such as averaged temperature and reactant concentrations. For the in-situ combustion process, the chemical reaction front is physically very narrow, typically a few inches thick. To capture accurately this front, centimeter-sized grids are required that are orders of magnitude smaller than the affordable grid block sizes for full field reservoir models. To solve this grid size effect problem, we propose a new method based on a non-Arrhenius reaction upscaling approach. We do not resolve the combustion front on the grid, but instead use a subgrid-scale model that captures the overall effects of the combustion reactions on flow and transport, i.e. the amount of heat released, the amount of oil burned and the reaction products generated. The subgrid-scale model is calibrated using fine-scale highly accurate numerical simulation and laboratory experiments. This approach significantly improves the computational speed of in-situ combustion simulation as compared to traditional methods. We propose the detailed procedures to implement this methodology in a field-scale simulator. Test cases illustrate the solution consistency when scaling up the grid sizes in multidimensional heterogeneous problems. The methodology is also applicable to other subsurface reactive flow modeling problems with fast chemical reactions and sharp fronts. Displacement front stability is a major concern in the design of all the enhanced oil recovery processes. Historically, premature combustion front break through has been an issue for field operations of in-situ combustion. In this work, we perform detailed analysis based on both analytical methods and numerical simulation. We identify the different flow regimes and several driving fronts in a typical 1D ISC process. For the ISC process in a conventional mobile heavy oil reservoir, we identify the most critical front as the front of steam plateau driving the cold oil bank. We discuss the five main contributors for this front stability/instability: viscous force, condensation, heat conduction, coke plugging and gravity. Detailed numerical tests are performed to test and rank the relative importance of all these different effects.

Author: Zhouyuan Zhu
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
Simulating thermal processes is usually computationally expensive because of the complexity of the problem and strong nonlinearities encountered. In this work, we explore novel and efficient simulation techniques to solve thermal enhanced oil recovery problems. We focus on two major topics: the extension of streamline simulation for thermal enhanced oil recovery and the efficient simulation of chemical reaction kinetics as applied to the in-situ combustion process. For thermal streamline simulation, we first study the extension to hot water flood processes, in which we have temperature induced viscosity changes and thermal volume changes. We first compute the pressure field on an Eulerian grid. We then solve for the advective parts of the mass balance and energy equations along the individual streamlines, accounting for the compressibility effects. At the end of each global time step, we account for the nonadvective terms on the Eulerian grid along with gravity using operator splitting. We test our streamline simulator and compare the results with a commercial thermal simulator. Sensitivity studies for compressibility, gravity and thermal conduction effects are presented. We further extended our thermal streamline simulation to steam flooding. Steam flooding exhibits large volume changes and compressibility associated with the phase behavior of steam, strong gravity segregation and override, and highly coupled energy and mass transport. To overcome these challenges we implement a novel pressure update along the streamlines, a Glowinski scheme operator splitting and a preliminary streamline/finite volume hybrid approach. We tested our streamline simulator on a series of test cases. We compared our thermal streamline results with those computed by a commercial thermal simulator for both accuracy and efficiency. For the cases investigated, we are able to retain solution accuracy, while reducing computational cost and gaining connectivity information from the streamlines. These aspects are useful for reservoir engineering purposes. In traditional thermal reactive reservoir simulation, mass and energy balance equations are solved numerically on discretized reservoir grid blocks. The reaction terms are calculated through Arrhenius kinetics using cell-averaged properties, such as averaged temperature and reactant concentrations. For the in-situ combustion process, the chemical reaction front is physically very narrow, typically a few inches thick. To capture accurately this front, centimeter-sized grids are required that are orders of magnitude smaller than the affordable grid block sizes for full field reservoir models. To solve this grid size effect problem, we propose a new method based on a non-Arrhenius reaction upscaling approach. We do not resolve the combustion front on the grid, but instead use a subgrid-scale model that captures the overall effects of the combustion reactions on flow and transport, i.e. the amount of heat released, the amount of oil burned and the reaction products generated. The subgrid-scale model is calibrated using fine-scale highly accurate numerical simulation and laboratory experiments. This approach significantly improves the computational speed of in-situ combustion simulation as compared to traditional methods. We propose the detailed procedures to implement this methodology in a field-scale simulator. Test cases illustrate the solution consistency when scaling up the grid sizes in multidimensional heterogeneous problems. The methodology is also applicable to other subsurface reactive flow modeling problems with fast chemical reactions and sharp fronts. Displacement front stability is a major concern in the design of all the enhanced oil recovery processes. Historically, premature combustion front break through has been an issue for field operations of in-situ combustion. In this work, we perform detailed analysis based on both analytical methods and numerical simulation. We identify the different flow regimes and several driving fronts in a typical 1D ISC process. For the ISC process in a conventional mobile heavy oil reservoir, we identify the most critical front as the front of steam plateau driving the cold oil bank. We discuss the five main contributors for this front stability/instability: viscous force, condensation, heat conduction, coke plugging and gravity. Detailed numerical tests are performed to test and rank the relative importance of all these different effects.

Author: James J.Sheng
Publisher: Gulf Professional Publishing
ISBN: 0123865468
Category : Science
Languages : en
Pages : 710

Get Book Here

Book Description
Enhanced Oil Recovery Field Case Studies bridges the gap between theory and practice in a range of real-world EOR settings. Areas covered include steam and polymer flooding, use of foam, in situ combustion, microorganisms, "smart water"-based EOR in carbonates and sandstones, and many more. Oil industry professionals know that the key to a successful enhanced oil recovery project lies in anticipating the differences between plans and the realities found in the field. This book aids that effort, providing valuable case studies from more than 250 EOR pilot and field applications in a variety of oil fields. The case studies cover practical problems, underlying theoretical and modeling methods, operational parameters, solutions and sensitivity studies, and performance optimization strategies, benefitting academicians and oil company practitioners alike. Strikes an ideal balance between theory and practice Focuses on practical problems, underlying theoretical and modeling methods, and operational parameters Designed for technical professionals, covering the fundamental as well as the advanced aspects of EOR

Author: Abdolhossein Hemmati Sarapardeh
Publisher: Elsevier
ISBN: 0128219335
Category : Science
Languages : en
Pages : 460

Get Book Here

Book Description
Thermal Methods, Volume Two, the latest release in the Enhanced Oil Recovery series, helps engineers focus on the latest developments in this fast-growing area. In the book, different techniques are described in addition to the latest technologies in data mining and hybrid processes. Supported field case studies are included to illustrate a bridge between research and practical applications, making it useful for both academics and practicing engineers. Structured to start with thermal concepts and steam flooding, the book's editors then advance to more complex content, guiding engineers into areas such as hybrid thermal methods and edgier technologies that bridge solar and nuclear energy. Supported by a full spectrum of contributors, this book gives petroleum engineers and researchers the latest research developments and field applications to drive innovation for the future of energy. Presents the latest understanding surrounding the updated research and practical applications specific to thermal enhanced oil recovery methods Provides an analysis of editors' research on available technology, including hybrid thermal-solvent processes and dual pipe configurations Teaches about additional methods, such as data mining applications, and economic and environmental considerations

Author: T.J. Smith
Publisher: Springer Science & Business Media
ISBN: 9400936176
Category : Technology & Engineering
Languages : en
Pages : 309

Get Book Here

Book Description
The origin of this book can be traced to a Workshop held at the University of Cambridge in December 1985 under the auspices of the Wolfson Group for Studies of Fluid Flow and Mixing in Industrial Processes. This Group was es tablished at the University of Cambridge in January 1983 and includes mem bers from the Departments of Applied Mathematics and Theoretical Physics, Engineering and Chemical Engineering. As its name suggests, the objective of the Group is to undertake, co"ordinate and stimulate research in various aspects of fluid flow and mixing in industrial processes. However, another equally important aim for the Group is to promote co-operation between the University and industry at all levels from collaborative research projects to joint colloquia. The Workshop in December 1985 on 'Mixing, Stirring and Solidification in Metallurgical Processes' which led to this book was one in an annual series of such meetings first held in December 1983. The existence of the Wolfson Group is due to the enthusiasm of its original advocate, the late Professor J. A. Shercliff FRS, Head of the Department of Engineering who, together with Professor G. K. Batchelor FRS, Professor J. F. Davidson FRS, Dr J. C. R. Hunt, and Dr R. E. Britter, were responsible for the initial application to the Wolfson Foundation and for the subsequent direction of the Group's activities.

Author: Burger J.
Publisher: Editions OPHRYS
ISBN: 9782710810605
Category :
Languages : en
Pages : 456

Get Book Here

Book Description

Author: Michael Prats
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 304

Get Book Here

Book Description

Author: James J. Sheng
Publisher: Elsevier Inc. Chapters
ISBN: 0128057785
Category : Science
Languages : en
Pages : 47

Get Book Here

Book Description
This chapter first reviews thermal properties of rock and fluids and related energy concepts. The fundamentals of heat transfer and heat loss, theories to estimate the heated area and oil recovery performance are briefly presented. The mechanisms and screening criteria of steam flooding are discussed. After the general practice in steam flooding projects is discussed, field cases are presented which include Kern River in California, Duri steam flood in Indonesia, West Coalinga Field in California, Karamay Field and the Qi-40 block in Laohe, China.

Author: Roland Wynne Lewis
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 1246

Get Book Here

Book Description