Author: M. A. Shea
Publisher:
ISBN:
Category : Albedo
Languages : en
Pages : 122
Book Description
Using the trajectory-tracing technique, the asymptotic directions and cut-off rigidities for Palestine, Dallas, and Midland, Texas were calculated as a function of various zenith and azimuth angles. Continuation of the trajectory-tracing process below the Stormer cutoff allows an evaluation of the reentrant albedo showing that the invariant latitude of the guiding center of the trajectory at the albedo origin is the same as the invariant latitude of the guiding center of the particle trajectory at the specified zenith and azimuth angle of the detection point. Tables of asymptotic directions, cutoff rigidities, and the location of the reentrant albedo for each of these locations are given. Summaries of cutoff rigidity calculations as a function of zenith and azimuth directions for some miscellaneous locations are also included.
Tables of Asymptotic Directions, Cutoff Rigidities, and Reentrant Albedo Calculations for Palestine, Dallas, and Midland Texas
Author: M. A. Shea
Publisher:
ISBN:
Category : Albedo
Languages : en
Pages : 122
Book Description
Using the trajectory-tracing technique, the asymptotic directions and cut-off rigidities for Palestine, Dallas, and Midland, Texas were calculated as a function of various zenith and azimuth angles. Continuation of the trajectory-tracing process below the Stormer cutoff allows an evaluation of the reentrant albedo showing that the invariant latitude of the guiding center of the trajectory at the albedo origin is the same as the invariant latitude of the guiding center of the particle trajectory at the specified zenith and azimuth angle of the detection point. Tables of asymptotic directions, cutoff rigidities, and the location of the reentrant albedo for each of these locations are given. Summaries of cutoff rigidity calculations as a function of zenith and azimuth directions for some miscellaneous locations are also included.
Publisher:
ISBN:
Category : Albedo
Languages : en
Pages : 122
Book Description
Using the trajectory-tracing technique, the asymptotic directions and cut-off rigidities for Palestine, Dallas, and Midland, Texas were calculated as a function of various zenith and azimuth angles. Continuation of the trajectory-tracing process below the Stormer cutoff allows an evaluation of the reentrant albedo showing that the invariant latitude of the guiding center of the trajectory at the albedo origin is the same as the invariant latitude of the guiding center of the particle trajectory at the specified zenith and azimuth angle of the detection point. Tables of asymptotic directions, cutoff rigidities, and the location of the reentrant albedo for each of these locations are given. Summaries of cutoff rigidity calculations as a function of zenith and azimuth directions for some miscellaneous locations are also included.
Tables of Asymptotic Directions and Vertical Cutoff Rigidities for a Five Degree by Fifteen Degree World Grid as Calculated Using the International Geomagnetic Reference Field for Epoch 1965.0
Author: M. A. Shea
Publisher:
ISBN:
Category : Asymptotes
Languages : en
Pages : 172
Book Description
Tables of asymptotic directions and vertical cutoff rigidities for a five degree by fifteen degree world grid are presented in this report. These values were obtained by the integration of vertically incident cosmic-ray trajectories through the International Geomagnetic Reference Field for Epoch 1965.0. The table of asymptotic directions contains the asymptotic latitudes and longitudes which specify the direction of approach, from interplanetary space, of a cosmic-ray particle. These asymptotic directions are given for each grid point for specific rigidities above the main cone cutoff rigidity. The table of vertical cutoff rigidities contains the geographic coordinates and L value of each location together with the main cone cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity. (Author).
Publisher:
ISBN:
Category : Asymptotes
Languages : en
Pages : 172
Book Description
Tables of asymptotic directions and vertical cutoff rigidities for a five degree by fifteen degree world grid are presented in this report. These values were obtained by the integration of vertically incident cosmic-ray trajectories through the International Geomagnetic Reference Field for Epoch 1965.0. The table of asymptotic directions contains the asymptotic latitudes and longitudes which specify the direction of approach, from interplanetary space, of a cosmic-ray particle. These asymptotic directions are given for each grid point for specific rigidities above the main cone cutoff rigidity. The table of vertical cutoff rigidities contains the geographic coordinates and L value of each location together with the main cone cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity. (Author).
Summary of Cutoff Rigidities Calculated with the International Geomagnetic Reference Field for Various Epochs
Author: M. A. Shea
Publisher:
ISBN:
Category : Cosmic rays
Languages : en
Pages : 102
Book Description
Tables of cosmic-ray cutoff rigidities using the trajectory-tracing technique are given for five Epochs of the geomagnetic field. These values have been determined utilizing the International Geomagnetic Reference Field with time derivatives applied so that the coefficients for the field model are appropriate for the following Epochs: 1955.0, 1965.0, 1966.5, 1970.0, and 1975.0. Each table includes the geographic coordinates and L value of each location together with the main cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity. Tables for both vertical and non-vertical directions are included, as well as a listing of the FORTRAN computer program used to calculate these values. (Author).
Publisher:
ISBN:
Category : Cosmic rays
Languages : en
Pages : 102
Book Description
Tables of cosmic-ray cutoff rigidities using the trajectory-tracing technique are given for five Epochs of the geomagnetic field. These values have been determined utilizing the International Geomagnetic Reference Field with time derivatives applied so that the coefficients for the field model are appropriate for the following Epochs: 1955.0, 1965.0, 1966.5, 1970.0, and 1975.0. Each table includes the geographic coordinates and L value of each location together with the main cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity. Tables for both vertical and non-vertical directions are included, as well as a listing of the FORTRAN computer program used to calculate these values. (Author).
Asymptotic Directions and Vertical Cutoff Rigidities for Selected Cosmic-ray Stations as Calculated Using the International Geomagnetic Reference Field Model Appropriate for Epoch 1975.0
Author: M. A. Shea
Publisher:
ISBN:
Category : Asymptotes
Languages : en
Pages : 112
Book Description
Tables of asymptotic directions and vertical cutoff rigidities for a selected set of cosmic-ray stations are presented. These values were obtained by the integration of vertically incident cosmic-ray trajectories through the International Geomagnetic Reference Field model adjusted for a 1975.0 Epoch. The table of asymptotic directions contains the asymptotic latitudes and longitudes that specify the direction of approach from interplanetary space of a cosmic-ray particle. These asymptotic directions are given for specific rigidities above the main cone cutoff rigidity for each station, and at 0.01 GV rigidity intervals throughout the penumbra. Maps of the asymptotic directions for each station are also included. The table of vertical cutoff rigidities contains the geographic coordinates and L value of each cosmic-ray station together with the main cone cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity. (Author).
Publisher:
ISBN:
Category : Asymptotes
Languages : en
Pages : 112
Book Description
Tables of asymptotic directions and vertical cutoff rigidities for a selected set of cosmic-ray stations are presented. These values were obtained by the integration of vertically incident cosmic-ray trajectories through the International Geomagnetic Reference Field model adjusted for a 1975.0 Epoch. The table of asymptotic directions contains the asymptotic latitudes and longitudes that specify the direction of approach from interplanetary space of a cosmic-ray particle. These asymptotic directions are given for specific rigidities above the main cone cutoff rigidity for each station, and at 0.01 GV rigidity intervals throughout the penumbra. Maps of the asymptotic directions for each station are also included. The table of vertical cutoff rigidities contains the geographic coordinates and L value of each cosmic-ray station together with the main cone cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity. (Author).
Tables of Asymptotic Directions and Vertical Cutoff Rigidities for a Five Degree by Fifteen Degree World Grid Using the Finch and Leaton Geomagnetic Field Model
Author: M. A. Shea
Publisher:
ISBN:
Category : Asymptotes
Languages : en
Pages : 170
Book Description
Tables of asymptotic directions and vertical cutoff rigidities for a five degree by fifteen degree world grid are presented. These values were obtained by the integration of vertically incident cosmic-ray trajectories through the Finch and Leaton (Epoch 1955) quiescent model of the geomagnetic field. The table of asymptotic directions contains the asymptotic latitudes and longitudes that specify the direction of approach, from interplanetary space, of a cosmic-ray particle. These asymptotic directions are given for each grid point for specific rigidities above the main cone cutoff rigidity. The table of vertical cutoff rigidities contains the geographic coordinates and L value of each location, together with the main cone cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity.
Publisher:
ISBN:
Category : Asymptotes
Languages : en
Pages : 170
Book Description
Tables of asymptotic directions and vertical cutoff rigidities for a five degree by fifteen degree world grid are presented. These values were obtained by the integration of vertically incident cosmic-ray trajectories through the Finch and Leaton (Epoch 1955) quiescent model of the geomagnetic field. The table of asymptotic directions contains the asymptotic latitudes and longitudes that specify the direction of approach, from interplanetary space, of a cosmic-ray particle. These asymptotic directions are given for each grid point for specific rigidities above the main cone cutoff rigidity. The table of vertical cutoff rigidities contains the geographic coordinates and L value of each location, together with the main cone cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity.
Supplemental Summary of Cutoff Rigidities Calculated Using the International Geomagnetic Reference Field for Various Epochs
Author: M. A. Shea
Publisher:
ISBN:
Category : Cosmic magnetic fields
Languages : en
Pages : 68
Book Description
Tables of cosmic-ray cutoff rigidities using the trajectory-tracing technique are given for three epochs of the geomagnetic field. These values have been determined utilizing the International Geomagnetic Reference Field with time derivatives applied so that the coefficients for the field model are appropriate for the following epochs: 1965.0, 1970.0, and 1975.0. Each table includes the geographic coordinates and L value of each location together with the main cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity. The altitude for which each set of values was calculated is also given. Tables for both vertical and non-vertical directions are included. These cutoff rigidity values are supplemental to those published in previous AFGL reports. In addition, minor corrections to previously published values are also included.
Publisher:
ISBN:
Category : Cosmic magnetic fields
Languages : en
Pages : 68
Book Description
Tables of cosmic-ray cutoff rigidities using the trajectory-tracing technique are given for three epochs of the geomagnetic field. These values have been determined utilizing the International Geomagnetic Reference Field with time derivatives applied so that the coefficients for the field model are appropriate for the following epochs: 1965.0, 1970.0, and 1975.0. Each table includes the geographic coordinates and L value of each location together with the main cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity. The altitude for which each set of values was calculated is also given. Tables for both vertical and non-vertical directions are included. These cutoff rigidity values are supplemental to those published in previous AFGL reports. In addition, minor corrections to previously published values are also included.
Tables of Asymptotic Directions and Vertical Cutoff Rigidities for a Five Degree by Fifteen Degree World Grid as Calculated Using the International Geomagnetic Reference Field for Epoch 1975.0
Author: M. A. Shea
Publisher:
ISBN:
Category : Computer programs
Languages : en
Pages : 174
Book Description
Tables of asymptotic directions and vertical cutoff rigidities for a five degree by fifteen degree world grid are presented. These values were obtained by the integration of vertically incident cosmic-ray trajectories through the International Geomagnetic Reference Field with time derivatives applied so that the coefficients form a quiescent model of the geomagnetic field for Epoch 1975.0. The table of asymptotic directions contains the asymptotic latitudes and longitudes which specify the direction of approach, from interplanetary space, of a cosmic-ray particle. These asymptotic directions are given for each grid point for specific rigidities above the main cone cutoff rigidity. The table of vertical cutoff rigidities contains the geographic coordinates and L value of each location together with the main cone cutoff rigidity, the Stoermer cutoff rigidity, and the effective cutoff rigidity.
Publisher:
ISBN:
Category : Computer programs
Languages : en
Pages : 174
Book Description
Tables of asymptotic directions and vertical cutoff rigidities for a five degree by fifteen degree world grid are presented. These values were obtained by the integration of vertically incident cosmic-ray trajectories through the International Geomagnetic Reference Field with time derivatives applied so that the coefficients form a quiescent model of the geomagnetic field for Epoch 1975.0. The table of asymptotic directions contains the asymptotic latitudes and longitudes which specify the direction of approach, from interplanetary space, of a cosmic-ray particle. These asymptotic directions are given for each grid point for specific rigidities above the main cone cutoff rigidity. The table of vertical cutoff rigidities contains the geographic coordinates and L value of each location together with the main cone cutoff rigidity, the Stoermer cutoff rigidity, and the effective cutoff rigidity.
Environmental Research Papers
Author:
Publisher:
ISBN:
Category : Environmental geology
Languages : en
Pages : 142
Book Description
Publisher:
ISBN:
Category : Environmental geology
Languages : en
Pages : 142
Book Description
Asymptotic Directions and Vertical Cutoff Rigidities for Selected Cosmic-ray Stations as Calculated Using the Finch and Leaton Geomagnetic Field Model
Author: M. A. Shea
Publisher:
ISBN:
Category : Computer simulation
Languages : en
Pages : 104
Book Description
Tables of asymptotic directions and vertical cutoff rigidities for a selected set of cosmic-ray stations are presented. These values were obtained by the integration of vertically incident cosmic-ray trajectories through the Finch and Leaton (Epoch 1955) quiescent model of the geomagnetic field. The table of asymptotic directions contains the asymptotic latitudes and longitudes that specify the direction of approach from interplanetary space of a cosmic-ray particle. These asymptotic directions are given for specific rigidities above the main cone cutoff rigidity for each station, and at 0.01 GV rigidity intervals throughout the penumbra. Maps of the symptotic directions for each station are included. The table of vertical cutoff rigidities contains the geographic coordinates and L value of each cosmic-ray station together with the main cone cutoff rigidity, the Stoermer cutoff rigidity, and the effective cutoff rigidity. (Author).
Publisher:
ISBN:
Category : Computer simulation
Languages : en
Pages : 104
Book Description
Tables of asymptotic directions and vertical cutoff rigidities for a selected set of cosmic-ray stations are presented. These values were obtained by the integration of vertically incident cosmic-ray trajectories through the Finch and Leaton (Epoch 1955) quiescent model of the geomagnetic field. The table of asymptotic directions contains the asymptotic latitudes and longitudes that specify the direction of approach from interplanetary space of a cosmic-ray particle. These asymptotic directions are given for specific rigidities above the main cone cutoff rigidity for each station, and at 0.01 GV rigidity intervals throughout the penumbra. Maps of the symptotic directions for each station are included. The table of vertical cutoff rigidities contains the geographic coordinates and L value of each cosmic-ray station together with the main cone cutoff rigidity, the Stoermer cutoff rigidity, and the effective cutoff rigidity. (Author).
Tables of Vertical Cutoff Rigidities for Epochs 1955 and 1960
Author: M. A. Shea
Publisher:
ISBN:
Category : Cosmic rays
Languages : en
Pages : 96
Book Description
Tables of vertical cutoff rigidities calculated using the trajectory-tracing technique are given for two epochs of the geomagnetic field. The Finch and Leaton magnetic field coefficients were used for Epoch 1955, and the Jensen and Cain coefficients were used for Epoch 1960. Each table includes the geographic coordinates and L value of each location together with the main cone cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity. Data for approximately 2900 locations on the earth are presented.
Publisher:
ISBN:
Category : Cosmic rays
Languages : en
Pages : 96
Book Description
Tables of vertical cutoff rigidities calculated using the trajectory-tracing technique are given for two epochs of the geomagnetic field. The Finch and Leaton magnetic field coefficients were used for Epoch 1955, and the Jensen and Cain coefficients were used for Epoch 1960. Each table includes the geographic coordinates and L value of each location together with the main cone cutoff rigidity, the Stormer cutoff rigidity, and the effective cutoff rigidity. Data for approximately 2900 locations on the earth are presented.