Synthesis and Carbon Dioxide Adsorption Properties of Amine Modified Particulate Silica Aerogel Sorbents PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Synthesis and Carbon Dioxide Adsorption Properties of Amine Modified Particulate Silica Aerogel Sorbents PDF full book. Access full book title Synthesis and Carbon Dioxide Adsorption Properties of Amine Modified Particulate Silica Aerogel Sorbents by Nick Linneen. Download full books in PDF and EPUB format.
Author: Nick Linneen
Publisher:
ISBN:
Category : Adsorption
Languages : en
Pages : 150
Get Book Here
Book Description
Post-combustion carbon capture is a viable option for reducing CO2 greenhouse gas emissions, and one potentially promising technology for this route is adsorption using chemically and physically based sorbents. A number of exceptional CO2 sorbents materials have been prepared including metal organic frameworks, zeolites, and carbon based materials. One particular group of capable materials are amine based solid sorbents that has shown to possess high adsorption capacities and favorable adsorption kinetics. A key variable in the synthesis of an amine based sorbent is the support which acts as the platform for the amine modification. Aerogels, due to their high porosities and surface areas, appear to be a promising support for an amine modified CO2 sorbent. Therefore, in order to develop a commercially viable CO2 sorbent, particulate aerogels manufactured by Cabot Corporation through an economical and proprietary ambient drying process were modified with amines using a variety of functionalization methods. Two methods of physical impregnation of the amino polymer TEPA were performed in order to observe the performance as well as understand the effects of how the TEPA distribution is affected by the method of introduction. Both samples showed excellent adsorption capacities but poor cyclic stability for lack of any covalent attachment. Furthermore the method of TEPA impregnation seems to be independent on how the polymer will be distributed in the pore space of aerogel. The last two methods utilized involved covalently attaching amino silanes to the surface silanols of the aerogel. One method was performed in the liquid phase under anhydrous and hydrous conditions. The materials developed through the hydrous method have much greater adsorption capacities relative to the anhydrous sample as a result of the greater amine content present in the hydrous sample. Water is another source of silylation where additional silanes can attach and polymerize. These samples also possessed stable cyclic stability after 100 adsorption/regeneration cycles. The other method of grafting was performed in the gas phase through ALD. These samples possessed exceptionally high amine efficiencies and levels of N content without damaging the microstructure of the aerogel in contrast to the liquid phase grafted sorbents.
Author: Nick Linneen
Publisher:
ISBN:
Category : Adsorption
Languages : en
Pages : 150
Get Book Here
Book Description
Post-combustion carbon capture is a viable option for reducing CO2 greenhouse gas emissions, and one potentially promising technology for this route is adsorption using chemically and physically based sorbents. A number of exceptional CO2 sorbents materials have been prepared including metal organic frameworks, zeolites, and carbon based materials. One particular group of capable materials are amine based solid sorbents that has shown to possess high adsorption capacities and favorable adsorption kinetics. A key variable in the synthesis of an amine based sorbent is the support which acts as the platform for the amine modification. Aerogels, due to their high porosities and surface areas, appear to be a promising support for an amine modified CO2 sorbent. Therefore, in order to develop a commercially viable CO2 sorbent, particulate aerogels manufactured by Cabot Corporation through an economical and proprietary ambient drying process were modified with amines using a variety of functionalization methods. Two methods of physical impregnation of the amino polymer TEPA were performed in order to observe the performance as well as understand the effects of how the TEPA distribution is affected by the method of introduction. Both samples showed excellent adsorption capacities but poor cyclic stability for lack of any covalent attachment. Furthermore the method of TEPA impregnation seems to be independent on how the polymer will be distributed in the pore space of aerogel. The last two methods utilized involved covalently attaching amino silanes to the surface silanols of the aerogel. One method was performed in the liquid phase under anhydrous and hydrous conditions. The materials developed through the hydrous method have much greater adsorption capacities relative to the anhydrous sample as a result of the greater amine content present in the hydrous sample. Water is another source of silylation where additional silanes can attach and polymerize. These samples also possessed stable cyclic stability after 100 adsorption/regeneration cycles. The other method of grafting was performed in the gas phase through ALD. These samples possessed exceptionally high amine efficiencies and levels of N content without damaging the microstructure of the aerogel in contrast to the liquid phase grafted sorbents.
Author: Teresa M. Rosa
Publisher:
ISBN:
Category : Aerogels
Languages : en
Pages : 85
Get Book Here
Book Description
Amine-modified solid sorbents and membrane separation are promising technologies for separation and capture of carbon dioxide (CO2) from combustion flue gas. Amine absorption processes are mature, but still have room for improvement. This work focused on the synthesis of amine-modified aerogels and metal-organic framework-5 (MOF-5) membranes for CO2 separation. A series of solid sorbents were synthesized by functionalizing amines on the surface of silica aerogels. This was done by three coating methods: physical adsorption, magnetically assisted impact coating (MAIC) and atomic layer deposition (ALD). CO2 adsorption capacity of the sorbents was measured at room temperature in a Cahn microbalance. The sorbents synthesized by physical adsorption show the largest CO2 adsorption capacity (1.43-1.63 mmol CO2/g). An additional sorbent synthesized by ALD on hydrophilic aerogels at atmospheric pressures shows an adsorption capacity of 1.23 mmol CO2/g. Studies on one amine-modified sorbent show that the powder is of agglomerate bubbling fluidization (ABF) type. The powder is difficult to fluidize and has limited bed expansion. The ultimate goal is to configure the amine-modified sorbents in a micro-jet assisted gas fluidized bed to conduct adsorption studies. MOF-5 membranes were synthesized on α-alumina supports by two methods: in situ synthesis and secondary growth synthesis. Characterization by scanning electron microscope (SEM) imaging and X-ray diffraction (XRD) show that the membranes prepared by both methods have a thickness of 14-16 μm, and a MOF-5 crystal size of 15-25 μm with no apparent orientation. Single gas permeation results indicate that the gas transport through both membranes is determined by a combination of Knudsen diffusion and viscous flow. The contribution of viscous flow indicates that the membranes have defects.
Author: A. Dabrowski
Publisher: Elsevier
ISBN: 0080526020
Category : Science
Languages : en
Pages : 945
Get Book Here
Book Description
There has been a lack of authoritative, current information on the structure, investigation and preparation of inorganic sorbents, their numerous applications as well as the adsorption from gaseous and liquid phases on new and chemically modified inorganic solids. This volume deals with the above-mentioned themes and presents 34 up-to-date comprehensive and critical reviews written by well-recognized authorities. The sorbents discussed are primarily mineral ones. Each contribution treats a problem critically by showing its development, presenting documentation on the state-of-the-art and identifying subjects for further research. The book will be of interest to researchers in academic institutes and industrial laboratories engaged in the fields of surface chemistry, inorganic chemistry, adsorption, ion-exchange, catalysis, chromatography and spectroscopy of the surface phenomena, as well as to students attending graduate and postgraduate courses.
Author: Sihan Wang
Publisher:
ISBN:
Category : Carbon sequestration
Languages : en
Pages :
Get Book Here
Book Description
Over loading of CO2 emission has been a severe environment problem and the fact of greenhouse issue has become a huge impact to our daily life. The largest and inevitable emission of CO2 gas is the coal-fired power plant, and the most commonly used CO2 capture sorbent is liquid amine. However, there are lots of inconvenience of using liquid amine including equipment corrosion, high regeneration energy and slow diffusion of the CO2 gas, which would cost the capture procedure a huge amount of expense. Nevertheless, the solid sorbent is in face of the issue that the capture capacities and SO2 resistance is really low. So in this research, the modified amine-functionalized solid sorbents for CO2 adsorption and SO2 resistance have been created. The problem of lower CO2 capture capacity was modified by double impregnation, and the issue of lower heat transfer rate was improved by adding heat transfer agent during pelletization. The characterization of the sorbent and pellets capture behavior was done by CO2 capture weight method and in-situ DRIFT spectra, and the SO2 resistance behavior has also been discussed with EDS mapping and quantification.
Author: Hui Jiang
Publisher:
ISBN:
Category : Amines
Languages : en
Pages : 52
Get Book Here
Book Description
Amine-functionalized solid adsorbents have gained attention within the last decade for their application in carbon dioxide capture, due to their many advantages such as low energy cost for regeneration, tunable structure, elimination of corrosion problems, and additional advantages. However, one of the challenges facing this technology is to accomplish both high CO2 capture capacity along with high CO2 diffusion rates concurrently. Current amine-based solid sorbents such as porous materials similar to SBA-15 have large pores diffusion entering molecules; however, the pores become clogged upon amine inclusion. To meet this challenge, our group's solution involves the creation of a new type of material which we are calling-amino-pillared nanosheet (APN) adsorbents which are generated from layered nanosheet precursors. These materials are being proposed because of their unique lamellar structure which exhibits ability to be modified by organic or inorganic pillars through consecutive swelling and pillaring steps to form large mesoporous interlayer spaces. After the expansion of the layer space through swelling and pillaring, the large pore space can be functionalized with amine groups. This selective functionalization is possible by the choice of amine group introduced. Our choice, large amine molecules, do not access the micropore within each layer; however, either physically or chemically immobilized onto the surface of the mesoporous interlayer space between each layer. The final goal of the research is to investigate the ability to prepare APN adsorbents from a model nanoporous layered materials including nanosheets precursor material MCM-22(P) and nanoporous layered silicate material AMH-3. MCM-22(P) contains 2-dimensional porous channels, 6 membered rings (MB) openings perpendicular to the layers and 10 MB channels in the plane of the layers.1 However, the transport limiting openings (6 MB) to the layers is smaller than CO2 gas molecules.2,3 In contrast, AMH-3 has 3D microporous layers with 8 MB openings in the plane of the layers, as well as perpendicular to the layers, which are larger than CO2 molecules. Based on the structure differences between nanosheets precursor material MCM-22(P) and nanoporous layered silicate material AMH-3, the latter might be more suitable for CO2 capturer application as an APN candidate material. However, none of the assumptions above have been approved experimentally. In this study, the influence of the amine loading on adsorption capacity and kinetics of adsorption for the mixed porosity material pillared MCM-22 (P) (also called MCM-36) is studied systematically, in order to determine a potential route to achieve a final material with both high amine loading and high adsorption capacity. We first synthesized MCM-22(P), followed by swelling and pillaring to create MCM-36. Polymeric amines such as polyethylenimine (PEI) are used as an organic component of the supported amine adsorbents, with varying polymer loadings within the adsorbents used. The kinetics and diffusion properties of carbon dioxide capture on a MCM-36 pillared material impregnated with amine containing Polyethylenimine polymers has been investigated. It was determined that the introduction of amine polymer cannot be used to improve the capture capacity of the support over that of the bare material, due to the fact that with the addition of a high loading of amine polymer the large pore diffusion channels become impossible for carbon dioxide molecules to diffuse through. This sets an upper limit to the capture capacity of polymer impregnated MCM-36 for carbon dioxide which does not surpass that for the initial bare material, and greatly reduces the utility of using this sort of amine-solid adsorbent for carbon capture plans in the future.
Author: Michel A. Aegerter
Publisher: Springer Nature
ISBN: 3030273229
Category : Technology & Engineering
Languages : en
Pages : 1778
Get Book Here
Book Description
This indispensable handbook provides comprehensive coverage of the current state-of-the-art in inorganic, organic, and composite aerogels – from synthesis and characterization to cutting-edge applications and their potential market impact. Built upon Springer’s successful Aerogels Handbook published in 2011, this handbook features extensive revisions and timely updates, reflecting the changes in this fast-growing field. Aerogels are the lightest solids known to man. Up to 1000 times lighter than glass and with a density only four times that of air, they possess extraordinarily high thermal, electrical, and acoustic insulation properties, and boast numerous entries in Guinness World Records. Originally based on silica, R&D efforts have extended this class of materials to incorporate non-silicate inorganic oxides, natural and synthetic organic polymers, carbon, metal, and ceramic materials. Composite systems involving polymer-crosslinked aerogels and interpenetrating hybrid networks have been developed and exhibit remarkable mechanical strength and flexibility. Even more exotic aerogels based on clays, chalcogenides, phosphides, quantum dots, and biopolymers such as chitosan are opening new applications for the construction, transportation, energy, defense and healthcare industries. Applications in electronics, chemistry, mechanics, engineering, energy production and storage, sensors, medicine, nanotechnology, military and aerospace, oil and gas recovery, thermal insulation, and household uses are being developed. Readers of this fully updated and expanded edition will find an exhaustive source for all aerogel materials known today, their fabrication, upscaling aspects, physical and chemical properties, and the most recent advances towards applications and commercial use. This key reference is essential reading for a combined audience of graduate students, academic researchers, and industry professionals.
Author: Nikhil Mittal
Publisher:
ISBN:
Category : Amines
Languages : en
Pages : 146
Get Book Here
Book Description
This work is divided into two parts: (1) Synthesis of amine functionalized adsorbents using grafting technique for post-combustion CO[subscript 2] capture, (2) Performance evaluation of structured bed configuration with straight gas flow channels using amine impregnated adsorbent for post-combustion CO[subscript 2] capture. Brief description of each part is given below: (1)N-(3-trimethoxysilylpropyl)diethylenetriamine (DAEAPTS) grafted SBA-15 adsorbents were synthesized for CO[subscript 2] capture. The adsorption of CO[subscript 2] on the amine-grafted sorbents was measured by thermogravimetric method over a CO[subscript 2] partial pressure range of 8-101.3 kPa and a temperature range of 25-105 °C under atmospheric pressure. The optimal amine loaded SBA-15 adsorbent was examined for multi-cycle stability and adsorption/desorption kinetics. (2)The performance of structured bed and packed bed configurations for post-combustion CO[subscript 2] capture was evaluated using PEI impregnated SBA-15 adsorbent. The effect of adsorption temperature (25-90 °C), adsorption /desorption kinetics and multi-cycle stability was studied in both structured and packed bed configurations.
Author: Dimitrios A Giannakoudakis
Publisher: Elsevier
ISBN: 0323904866
Category : Technology & Engineering
Languages : en
Pages : 652
Get Book Here
Book Description
Advanced Materials for Sustainable Environmental Remediation: Terrestrial and Aquatic Environments presents detailed, comprehensive coverage of novel and advanced materials that can be applied to address the growing global concern of the pollution of natural resources in waters, the air and soil. It provides fundamental knowledge on available materials and treatment processes, as well as applications, including adsorptive remediation and catalytic remediation. Organized clearly by type of material, this book presents a consistent structure for each chapter, including characteristics of the materials, basic and important physicochemical features for environmental remediation applications, routes of synthesis, recent advances as remediation medias, and future perspectives. This book offers an interdisciplinary and practical examination of available materials and processes for environmental remediation that will be valuable to environmental scientists, materials scientists, environmental chemists, and environmental engineers alike. - Highlights a wide range of synthetic methodologies, physicochemical and engineered features of novel materials and composites/hybrids for environmental purposes - Provides comprehensive, consolidated coverage of advanced materials for environmental remediation applications for researchers in environmental science, materials science, and industry to identify in-depth solutions to pollution - Presents up-to-date details of advanced materials, including descriptions and characteristics that impact their applications in environmental remediation processes
Author:
Publisher: Elsevier
ISBN: 0128133589
Category : Technology & Engineering
Languages : en
Pages : 608
Get Book Here
Book Description
Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques Presents key applications, including biomedical, energy, electronic and environmental Discusses the most relevant techniques for synthesis, patterning and characterization
Author: Chaudhery Mustansar Hussain
Publisher: Elsevier
ISBN: 0128110341
Category : Technology & Engineering
Languages : en
Pages : 758
Get Book Here
Book Description
New Polymer Nanocomposites for Environmental Remediation summarizes recent progress in the development of materials' properties, fabrication methods and their applications for treatment of contaminants, pollutant sensing and detection. This book presents current research into how polymer nanocomposites can be used in environmental remediation, detailing major environmental issues, and key materials properties and existing polymers or nanomaterials that can solve these issues. The book covers the fundamental molecular structure of polymers used in environmental applications, the toxicology, economy and life-cycle analysis of polymer nanocomposites, and an analysis of potential future applications of these materials. Recent research and development in polymer nanocomposites has inspired the progress and use of novel and cost-effective environmental applications. - Presents critical, actionable guidelines to the structure and property design of nanocomposites in environmental remediation - Focuses on taking technology out of the lab and into the real world - Summarizes the latest developments in polymer nanocomposites and their applications in catalytic degradation, adsorptive removal and detection of contaminants in the environment - Enables researchers to stay ahead of the curve, with a full discussion of regulatory issues and potential new applications and materials in this area
