Author: ALPERTUNGA ANIKER
Publisher: ALPERTUNGA ANIKER
ISBN:
Category : Antiques & Collectibles
Languages : en
Pages : 169
Book Description
Vessels ftted with azimuthing podded propulsors have much better maneuvering capabilities. They are also environmentally friendly with much reduced exhaust emissions. With these unique features ,they offer signifcant economic, safety and environmental advantages to society, but unfortunately, the routines and the emergency procedures of the azimuthing podded propulsion system were not clearly defned and incorporated into onboard ISM systems. Masters, Chief Engineers and Pilots should receive a specialist training before they lay their hands on the controls, but instead most of them still have to try learning on the job, which sometimes lead to serious incidents, near misses and accidents with serious consequences. One of the reasons that encouraged me to write this book is to draw attention to these serious shortcomings which someday may cause society to pay a high price. My main focus in this book has been on telling about the shiphandling behaviours of electrically-driven azimuthing propulsors rather than the mechanically-driven azimuthing propulsors. Despite the fact that the shiphandling principles of both systems are quite similar, I chose not to mention much about the mechanically driven azimuthing propulsors as they are mostly related with tugboats. Tugboat handling is another speciality, which I believe should be explained only by seasoned tugboat captains themselves. I am a professional maritime pilot but an amateur author and this book is solely intended to share my humble experience and knowledge with my colleagues, ship captains, students and all other interested parties of the maritime industry. Dear Reader, I had actually started writing this book in order to keep my experience on the subject in writing and bring together all the data I have collected from various resources at different times. To improve my knowledge and experience, I have also joined a special manned model course for “Pod Handling and Emergencies” at Port Revel Shiphandling Centre which is located at Grenoble, France in May 2010. Vessels ftted with azimuthing podded propulsors have much better manoeuvring capabilities, such as reduced turning diameters and signifcantly shorter stopping distances compared to the conventional systems with a fxed propeller and conventional rudder. They are also environmentally friendly with much reduced exhaust emissions. With these unique features ,they offer signifcant economic, safety and environmental advantages to society, but unfortunately, the routines and the emergency procedures of the azimuthing podded propulsion system were not clearly defned and incorporated into onboard ISM systems. Even class surveyors and Port State surveyors don’t seem to have enough knowledge about this technology. Masters, Chief Engineers and Pilots should receive a specialist training before they lay their hands on the controls, but instead most of them still have to try learning on the job, which sometimes lead to serious incidents, near misses and accidents with serious consequences. One of the reasons that encouraged me to write this book is to draw attention to these serious shortcomings which someday may cause society to pay a high price.
SHIPHANDLING WITH AZUMUTHING PODDED PROPELLERS
Author: ALPERTUNGA ANIKER
Publisher: ALPERTUNGA ANIKER
ISBN:
Category : Antiques & Collectibles
Languages : en
Pages : 169
Book Description
Vessels ftted with azimuthing podded propulsors have much better maneuvering capabilities. They are also environmentally friendly with much reduced exhaust emissions. With these unique features ,they offer signifcant economic, safety and environmental advantages to society, but unfortunately, the routines and the emergency procedures of the azimuthing podded propulsion system were not clearly defned and incorporated into onboard ISM systems. Masters, Chief Engineers and Pilots should receive a specialist training before they lay their hands on the controls, but instead most of them still have to try learning on the job, which sometimes lead to serious incidents, near misses and accidents with serious consequences. One of the reasons that encouraged me to write this book is to draw attention to these serious shortcomings which someday may cause society to pay a high price. My main focus in this book has been on telling about the shiphandling behaviours of electrically-driven azimuthing propulsors rather than the mechanically-driven azimuthing propulsors. Despite the fact that the shiphandling principles of both systems are quite similar, I chose not to mention much about the mechanically driven azimuthing propulsors as they are mostly related with tugboats. Tugboat handling is another speciality, which I believe should be explained only by seasoned tugboat captains themselves. I am a professional maritime pilot but an amateur author and this book is solely intended to share my humble experience and knowledge with my colleagues, ship captains, students and all other interested parties of the maritime industry. Dear Reader, I had actually started writing this book in order to keep my experience on the subject in writing and bring together all the data I have collected from various resources at different times. To improve my knowledge and experience, I have also joined a special manned model course for “Pod Handling and Emergencies” at Port Revel Shiphandling Centre which is located at Grenoble, France in May 2010. Vessels ftted with azimuthing podded propulsors have much better manoeuvring capabilities, such as reduced turning diameters and signifcantly shorter stopping distances compared to the conventional systems with a fxed propeller and conventional rudder. They are also environmentally friendly with much reduced exhaust emissions. With these unique features ,they offer signifcant economic, safety and environmental advantages to society, but unfortunately, the routines and the emergency procedures of the azimuthing podded propulsion system were not clearly defned and incorporated into onboard ISM systems. Even class surveyors and Port State surveyors don’t seem to have enough knowledge about this technology. Masters, Chief Engineers and Pilots should receive a specialist training before they lay their hands on the controls, but instead most of them still have to try learning on the job, which sometimes lead to serious incidents, near misses and accidents with serious consequences. One of the reasons that encouraged me to write this book is to draw attention to these serious shortcomings which someday may cause society to pay a high price.
Publisher: ALPERTUNGA ANIKER
ISBN:
Category : Antiques & Collectibles
Languages : en
Pages : 169
Book Description
Vessels ftted with azimuthing podded propulsors have much better maneuvering capabilities. They are also environmentally friendly with much reduced exhaust emissions. With these unique features ,they offer signifcant economic, safety and environmental advantages to society, but unfortunately, the routines and the emergency procedures of the azimuthing podded propulsion system were not clearly defned and incorporated into onboard ISM systems. Masters, Chief Engineers and Pilots should receive a specialist training before they lay their hands on the controls, but instead most of them still have to try learning on the job, which sometimes lead to serious incidents, near misses and accidents with serious consequences. One of the reasons that encouraged me to write this book is to draw attention to these serious shortcomings which someday may cause society to pay a high price. My main focus in this book has been on telling about the shiphandling behaviours of electrically-driven azimuthing propulsors rather than the mechanically-driven azimuthing propulsors. Despite the fact that the shiphandling principles of both systems are quite similar, I chose not to mention much about the mechanically driven azimuthing propulsors as they are mostly related with tugboats. Tugboat handling is another speciality, which I believe should be explained only by seasoned tugboat captains themselves. I am a professional maritime pilot but an amateur author and this book is solely intended to share my humble experience and knowledge with my colleagues, ship captains, students and all other interested parties of the maritime industry. Dear Reader, I had actually started writing this book in order to keep my experience on the subject in writing and bring together all the data I have collected from various resources at different times. To improve my knowledge and experience, I have also joined a special manned model course for “Pod Handling and Emergencies” at Port Revel Shiphandling Centre which is located at Grenoble, France in May 2010. Vessels ftted with azimuthing podded propulsors have much better manoeuvring capabilities, such as reduced turning diameters and signifcantly shorter stopping distances compared to the conventional systems with a fxed propeller and conventional rudder. They are also environmentally friendly with much reduced exhaust emissions. With these unique features ,they offer signifcant economic, safety and environmental advantages to society, but unfortunately, the routines and the emergency procedures of the azimuthing podded propulsion system were not clearly defned and incorporated into onboard ISM systems. Even class surveyors and Port State surveyors don’t seem to have enough knowledge about this technology. Masters, Chief Engineers and Pilots should receive a specialist training before they lay their hands on the controls, but instead most of them still have to try learning on the job, which sometimes lead to serious incidents, near misses and accidents with serious consequences. One of the reasons that encouraged me to write this book is to draw attention to these serious shortcomings which someday may cause society to pay a high price.
Marine Propellers and Propulsion
Author: John Carlton
Publisher: Butterworth-Heinemann
ISBN: 0080971237
Category : Technology & Engineering
Languages : en
Pages : 539
Book Description
The early development of the screw propeller. Propeller geometry. The propeller environment. The ship wake field, propeller performance characteristics.
Publisher: Butterworth-Heinemann
ISBN: 0080971237
Category : Technology & Engineering
Languages : en
Pages : 539
Book Description
The early development of the screw propeller. Propeller geometry. The propeller environment. The ship wake field, propeller performance characteristics.
Marine Propellers and Propulsion
Author: John S. Carlton
Publisher: Butterworth-Heinemann
ISBN:
Category : Science
Languages : en
Pages : 518
Book Description
Publisher: Butterworth-Heinemann
ISBN:
Category : Science
Languages : en
Pages : 518
Book Description
Scale Model Ship Propulsion
Author: Tom Gorman
Publisher: Bloomsbury Academic
ISBN: 9781861762108
Category : Ship models
Languages : en
Pages : 143
Book Description
A comprehensive guide to the installation, operation and maintenance of propulsion systems for scale model ships, emphasising practical advice. Beginning with the choice of model and the propulsion system to go with it, the author goes on to describe both electric and steam systems, including the fitting and care of battery packs, radio control and the operation of steam boilers, with particular emphasis on the safety requirements when dealing with pressurized containers. Both paddle-wheels and screw propellers are covered, as well as specialist propulsion units such as variable-pitch propellers, azimuth thrusters and Voith Schneider units and their particular advantages and operational requirements.
Publisher: Bloomsbury Academic
ISBN: 9781861762108
Category : Ship models
Languages : en
Pages : 143
Book Description
A comprehensive guide to the installation, operation and maintenance of propulsion systems for scale model ships, emphasising practical advice. Beginning with the choice of model and the propulsion system to go with it, the author goes on to describe both electric and steam systems, including the fitting and care of battery packs, radio control and the operation of steam boilers, with particular emphasis on the safety requirements when dealing with pressurized containers. Both paddle-wheels and screw propellers are covered, as well as specialist propulsion units such as variable-pitch propellers, azimuth thrusters and Voith Schneider units and their particular advantages and operational requirements.
Hydrodynamics of Ship Propellers
Author: John P. Breslin
Publisher: Cambridge University Press
ISBN: 9780521574709
Category : Science
Languages : en
Pages : 588
Book Description
Technical introduction to ship propeller hydrodynamics, for researchers in ocean technology, naval architecture, mechanical engineering.
Publisher: Cambridge University Press
ISBN: 9780521574709
Category : Science
Languages : en
Pages : 588
Book Description
Technical introduction to ship propeller hydrodynamics, for researchers in ocean technology, naval architecture, mechanical engineering.
Basic Ship Propulsion
Author: J. P. Ghose
Publisher: Allied Publishers
ISBN: 9788177646061
Category : Marine engineering
Languages : en
Pages : 608
Book Description
Publisher: Allied Publishers
ISBN: 9788177646061
Category : Marine engineering
Languages : en
Pages : 608
Book Description
Screw Propellers and Estimation of Power for Propulsion of Ships
Author: Charles Wilson Dyson
Publisher:
ISBN:
Category : Propellers
Languages : en
Pages : 348
Book Description
Publisher:
ISBN:
Category : Propellers
Languages : en
Pages : 348
Book Description
Propulsion
Author: Justin Elliot Kerwin
Publisher: Society of Naval Architects & Marine Engineers
ISBN: 9780939773831
Category : Ship propulsion
Languages : en
Pages : 183
Book Description
This book presents a comprehensive and up-to-date treatment of propeller analysis and design, including beginning with an introduction to various types of marine propulsion machinery, definitions of powers and efficiencies, and two- and three-dimensional airfoil theory. A section on three-dimensional hydrofoil theory introduces wake vortex sheets and three-dimensional vortex lines. These discussions topics are followed by linear lifting line- and lifting surface theory with both exact and approximate solution methods-including properties of helicoidal vortex sheets, optimum and arbitrary circulation distributions, and the Lerbs induction factor method. There are sections on model testing of propellers, propeller strength and followed by selection and design using both standard series charts and by circulation theory. The final section discusses ship standardization trials, their purpose, measurement methods and instruments, concluding with the analysis of trial data and derivation of the model-ship correlation allowance.
Publisher: Society of Naval Architects & Marine Engineers
ISBN: 9780939773831
Category : Ship propulsion
Languages : en
Pages : 183
Book Description
This book presents a comprehensive and up-to-date treatment of propeller analysis and design, including beginning with an introduction to various types of marine propulsion machinery, definitions of powers and efficiencies, and two- and three-dimensional airfoil theory. A section on three-dimensional hydrofoil theory introduces wake vortex sheets and three-dimensional vortex lines. These discussions topics are followed by linear lifting line- and lifting surface theory with both exact and approximate solution methods-including properties of helicoidal vortex sheets, optimum and arbitrary circulation distributions, and the Lerbs induction factor method. There are sections on model testing of propellers, propeller strength and followed by selection and design using both standard series charts and by circulation theory. The final section discusses ship standardization trials, their purpose, measurement methods and instruments, concluding with the analysis of trial data and derivation of the model-ship correlation allowance.
Shiphandling for the Mariner
Author: Daniel H. MacElrevey
Publisher: Cornell Maritime Press/Tidewater Publishers
ISBN:
Category : Sports & Recreation
Languages : en
Pages : 412
Book Description
This book focuses on large, modern commercial vessels. Unique in its emphasis on the art of shiphandling and manoeuvres for such vessels, it is a classic work designed to teach mariners and pilots practical shiphandling skills. The book is used as a text by maritime academies, shiphandling training facilities, ships' officers, and apprentice pilots. The text is a compendium of shiphandling information written by a father and son team of pilots, with contributions from several other pilots and shipmasters who provided material relating to their specialised skills. It is written primarily for the practising mariner -- the shipmaster, mate, naval or Coast Guard officer -- who already possesses some degree of professional knowledge, experience, and training. The text follows a non-technical format, stressing manoeuvres routinely used by working pilots and mariners. The material incorporates information from recent tests of the hydrodynamics of ship behaviour and simulator-developed data, with procedures and practices based on the authors' experience, gained while working as shipmasters, canal pilots, mooring masters, and river pilots. The fourth edition includes new information on squat and under-keel clearance in shallow water, bridge resource management for pilots, and discussions of new propulsion systems and hull types, including VMax ships and Azipod propulsion systems, proposals for a more modern approach to VTS, and laptop navigation systems for manoeuvring in pilot waters. Most manoeuvres used in docking, undocking, and shiphandling are covered, and many less commonly performed manoeuvres, including docking at single-point and multiple-buoy moorings, use of anchors in shiphandling, offshore lightering, and transiting of locks and canals. Good bridge practices in pilot waters and training techniques, including simulator training, are discussed, so that the potential deck officer or master can develop the shiphandling skills essential to the marine profession.
Publisher: Cornell Maritime Press/Tidewater Publishers
ISBN:
Category : Sports & Recreation
Languages : en
Pages : 412
Book Description
This book focuses on large, modern commercial vessels. Unique in its emphasis on the art of shiphandling and manoeuvres for such vessels, it is a classic work designed to teach mariners and pilots practical shiphandling skills. The book is used as a text by maritime academies, shiphandling training facilities, ships' officers, and apprentice pilots. The text is a compendium of shiphandling information written by a father and son team of pilots, with contributions from several other pilots and shipmasters who provided material relating to their specialised skills. It is written primarily for the practising mariner -- the shipmaster, mate, naval or Coast Guard officer -- who already possesses some degree of professional knowledge, experience, and training. The text follows a non-technical format, stressing manoeuvres routinely used by working pilots and mariners. The material incorporates information from recent tests of the hydrodynamics of ship behaviour and simulator-developed data, with procedures and practices based on the authors' experience, gained while working as shipmasters, canal pilots, mooring masters, and river pilots. The fourth edition includes new information on squat and under-keel clearance in shallow water, bridge resource management for pilots, and discussions of new propulsion systems and hull types, including VMax ships and Azipod propulsion systems, proposals for a more modern approach to VTS, and laptop navigation systems for manoeuvring in pilot waters. Most manoeuvres used in docking, undocking, and shiphandling are covered, and many less commonly performed manoeuvres, including docking at single-point and multiple-buoy moorings, use of anchors in shiphandling, offshore lightering, and transiting of locks and canals. Good bridge practices in pilot waters and training techniques, including simulator training, are discussed, so that the potential deck officer or master can develop the shiphandling skills essential to the marine profession.
The Screw Propeller
Author: Albert E. Seaton
Publisher: BoD – Books on Demand
ISBN: 3954272733
Category :
Languages : en
Pages : 286
Book Description
Albert Edward Seaton describes and discusses different methods and instruments for marine propulsion. The focus is on the screw propeller. Seaton gives an account of its history, leading features, forms and the materials used for it. In addition, he presents several screw propeller trials and experiments of the late 19th and early 20th century.Reprint of the original edition from 1909.
Publisher: BoD – Books on Demand
ISBN: 3954272733
Category :
Languages : en
Pages : 286
Book Description
Albert Edward Seaton describes and discusses different methods and instruments for marine propulsion. The focus is on the screw propeller. Seaton gives an account of its history, leading features, forms and the materials used for it. In addition, he presents several screw propeller trials and experiments of the late 19th and early 20th century.Reprint of the original edition from 1909.