Seismic Performance of Steel Girder Bridge Superstructures with Conventional Cross Frames PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Seismic Performance of Steel Girder Bridge Superstructures with Conventional Cross Frames PDF full book. Access full book title Seismic Performance of Steel Girder Bridge Superstructures with Conventional Cross Frames by Lyle P. Carden. Download full books in PDF and EPUB format.
Author: Lyle P. Carden
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 225
Get Book Here
Book Description
Author: Lyle P. Carden
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 225
Get Book Here
Book Description
Author: Lyle P. Carden
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 286
Get Book Here
Book Description
Author:
Publisher:
ISBN: 9780496081707
Category : Bridges
Languages : en
Pages : 688
Get Book Here
Book Description
The assumption that the superstructure of a bridge will remain elastic during large earthquake excitation is not necessarily valid for steel plate girder bridges. Past earthquakes have shown considerable damage to end cross frames, bearings, bearing stiffeners and other superstructure components, largely attributed to transverse excitation. These components need to be designed to resist the effects of seismic loading. The potential to use the end cross frames to reduce the seismic demand on a bridge is investigated in this dissertation and compared to the response of a bridge with seismic isolation.
Author: Lyle P. Carden
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 272
Get Book Here
Book Description
Author: Seyed Mehdi Zahrai
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
Many steel bridges have suffered severe diaphragm (cross-frame) damage during recent earthquakes around the world. The relative role played by intermediate and end-diaphragms in providing lateral load resistance, and the consequences of diaphragm damage on bridge seismic response have not been studied. These bridges are also frequently supported by seismically vulnerable non-ductile substructures whose seismic retrofit can be, in many cases, a rather costly operation. This research addresses three related issues to the seismic behavior of slab-on-girder steel highway bridges: (i) the impact of diaphragm on their seismic performance, (ii) innovative methods for their seismic retrofit and (iii) corrosion effects on the strength and ductility of their steel members. To study the first issue, research is conducted to quantitatively investigate the impact of diaphragms on the seismic response of these steel bridges. It is shown that a small end-diaphragm stiffness is sufficient to make the entire superstructure behave as a unit in the elastic range. However, a dramatic shift in seismic behavior occurs once those end-diaphragms fail, with a sizeable period elongation, considerably larger lateral displacements and higher propensity to damage due to P-$\Lambda$ effects. For seismic retrofits of these bridges, this research consists of four essential parts: development of the ductile end-diaphragm concept, development of a design procedure, a series of inelastic analyses to validate the concept, and testing of all scale models for the proposed end-diaphragms to further verify the concept and to validate the proposed detailing. First, to take advantage of the benefits granted by the presence of a steel superstructure, an innovative, economical effective and simple to implement seismic retrofit strategy, using ductile steel bridge end-diaphragms (such as shear panels, eccentrically braced frames and triangular-plate added damping and stiffness devices) has been developed. Second, a step by step design procedure for ductile end-diaphragms is proposed and potential limits of application are indicated. In the third part, the DRAIN-2DX and ADINA programs are used to conduct nonlinear inelastic analyses of these retrofitted bridges and investigate their expected seismic behavior. Test results demonstrate the effectiveness of the proposed ductile end-diaphragms as effective passive energy dissipation systems in slab-on-girder steel bridges. For the third issue, the effect of corrosion on the strength and ductility of steel members is also studied to investigate the long-term performance of the ductile end-diaphragms proposed here. To generate preliminary data, a few rusted pieces taken from an existing steel bridge have been subjected to numerous cycles of alternating plasticity in flexure. Specimens had up to a 60% loss of cross-sectional area due to corrosion. This limited test program revealed that, while stable hysteretic behavior comparable to that of unrusted specimen is possible, premature failure under alternating plasticity can typically develop (in spite of satisfactory ductile behavior under monotonic loading). Irregularities along the severely rusted surface apparently act as crack initiators and precipitate crack propagation throughout the section. (Abstract shortened by UMI.).
Author: Yin-Nan Huang
Publisher:
ISBN:
Category : Earthquake engineering
Languages : en
Pages : 404
Get Book Here
Book Description
Author: U. S. Department Transportation
Publisher: CreateSpace
ISBN: 9781484198179
Category :
Languages : en
Pages : 168
Get Book Here
Book Description
This report presents the results of a pilot study on the seismic behavior and response of steel bridges with integral abutments. Analytical investigations were conducted on computational models of steel bridges with integral abutments to determine their seismic behavior as a system and to develop seismic design guidelines. The effect of the superstructure flexibility due to inadequate embedment length was investigated using 3D finite element models. This flexibility, modeled as translational and rotational springs, proved to have significant effect on the overall bridge dynamic characteristics in terms of periods and critical mode shapes. Lateral and longitudinal load paths and the seismic response were investigated using modal pushover and nonlinear time history analyses. A limited investigation on the effect of skew was conducted on a single-span integral abutment bridge. A procedure for incorporating the system level damping due to the yielding and inelastic responses of various components was proposed for use in the seismic analysis. Based on the analytical investigations and available experimental research, guidelines for the seismic analysis and design of integral abutment bridges were developed.
Author: Bing Qu
Publisher:
ISBN:
Category : Plates, Iron and steel
Languages : en
Pages : 280
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 452
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Earthquake engineering
Languages : en
Pages : 232
Get Book Here
Book Description
