Author: Sefa Demirtas
Publisher:
ISBN:
Category :
Languages : en
Pages : 88
Get Book Here
Book Description
GaN High Electron Mobility Transistors are promising devices for high power and high frequency applications such as cellular base stations, radar and wireless network systems, due to the high bandgap and high breakdown field of GaN. However, their reliability is the main hindrance to the deployment of these transistors in a wide scale. In this study, we have investigated the reliability of GaN HEMTs grown on Si substrates. The large lattice and thermal mismatch between GaN and Si adds an additional reliability concern as compared to conventional substrates such as SiC and sapphire. We have performed systematic electrical stress experiments to understand the physics of degradation in these devices. Relevant device parameters are recorded continuously during these stress tests by a benign characterization suite. We conclude from these experiments that high voltage stress conditions are more effective in degrading the device than high current conditions. High voltage stress is found to impact the device in two different ways. The first is increased trapping in the large number of traps in the highly mismatched device structure even before any stress. The second is through the converse piezoelectric effect discussed by Joh et al. for GaN-on-SiC devices. We also have found evidence that these two mechanisms are connected. We have used UV illumination to enhance detrapping and shown that trapped electrons screen the electric field in the device and increase the critical voltage at which gate current degrades.
Author: D. Nirmal
Publisher: CRC Press
ISBN: 0429862520
Category : Science
Languages : en
Pages : 434
Get Book Here
Book Description
This book focusses on III-V high electron mobility transistors (HEMTs) including basic physics, material used, fabrications details, modeling, simulation, and other important aspects. It initiates by describing principle of operation, material systems and material technologies followed by description of the structure, I-V characteristics, modeling of DC and RF parameters of AlGaN/GaN HEMTs. The book also provides information about source/drain engineering, gate engineering and channel engineering techniques used to improve the DC-RF and breakdown performance of HEMTs. Finally, the book also highlights the importance of metal oxide semiconductor high electron mobility transistors (MOS-HEMT). Key Features Combines III-As/P/N HEMTs with reliability and current status in single volume Includes AC/DC modelling and (sub)millimeter wave devices with reliability analysis Covers all theoretical and experimental aspects of HEMTs Discusses AlGaN/GaN transistors Presents DC, RF and breakdown characteristics of HEMTs on various material systems using graphs and plots
Author: Matteo Meneghini
Publisher: Springer
ISBN: 3319431994
Category : Technology & Engineering
Languages : en
Pages : 383
Get Book Here
Book Description
This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.
Author: Osamu Ueda
Publisher: Springer Science & Business Media
ISBN: 1461443377
Category : Science
Languages : en
Pages : 618
Get Book Here
Book Description
Materials and Reliability Handbook for Semiconductor Optical and Electron Devices provides comprehensive coverage of reliability procedures and approaches for electron and photonic devices. These include lasers and high speed electronics used in cell phones, satellites, data transmission systems and displays. Lifetime predictions for compound semiconductor devices are notoriously inaccurate due to the absence of standard protocols. Manufacturers have relied on extrapolation back to room temperature of accelerated testing at elevated temperature. This technique fails for scaled, high current density devices. Device failure is driven by electric field or current mechanisms or low activation energy processes that are masked by other mechanisms at high temperature. The Handbook addresses reliability engineering for III-V devices, including materials and electrical characterization, reliability testing, and electronic characterization. These are used to develop new simulation technologies for device operation and reliability, which allow accurate prediction of reliability as well as the design specifically for improved reliability. The Handbook emphasizes physical mechanisms rather than an electrical definition of reliability. Accelerated aging is useful only if the failure mechanism is known. The Handbook also focuses on voltage and current acceleration stress mechanisms.
Author: Hadhemi Lakhdhar
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This Ph.D. work focuses on the reliability assessment of ultra-short gate AlGaN/GaN high electron mobility transistor (HEMT) on silicon substrate dedicated to power applications at frequency above 40GHz. It was carried out within IMS Bordeaux and IEMN Lille laboratories.This work initially compares AlGaN/GaN HEMTs grown by MOCVD with those grown using MBE, through electrical characterization.In particular, the device geometry impact on the device performances has been studies by static electrical characterization.Step-stress experiments are performed to investigate reliability assessment of ultra-short gate AlGaN/GaN high electron mobility transistor (HEMT) on Si substrate. A methodology based on a sequence of step stress tests has been defined for in-situ diagnosis of a permanent degradation and of a degradation which is identified by a drain current transient occurring during each step of the ageing sequence . The same stress conditions were applied on HEMTs with different geometries. It is found no evolution of the drain current during non stressful steps. The value of the critical degradation voltage beyond which the stress drain current starts to decrease significantly is also found dependent on the stress bias conditions, the gate-drain distance and the gate length. Moreover, the safe operating area of this technology has been determined.
Author: Alex Lidow
Publisher: John Wiley & Sons
ISBN: 1119594421
Category : Science
Languages : en
Pages : 470
Get Book Here
Book Description
An up-to-date, practical guide on upgrading from silicon to GaN, and how to use GaN transistors in power conversion systems design This updated, third edition of a popular book on GaN transistors for efficient power conversion has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout, and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. GaN Transistors for Efficient Power Conversion, 3rd Edition brings key updates to the chapters of Driving GaN Transistors; Modeling, Simulation, and Measurement of GaN Transistors; DC-DC Power Conversion; Envelope Tracking; and Highly Resonant Wireless Energy Transfer. It also offers new chapters on Thermal Management, Multilevel Converters, and Lidar, and revises many others throughout. Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications Updated with 35% new material, including three new chapters on Thermal Management, Multilevel Converters, Wireless Power, and Lidar Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors A valuable resource for professional engineers, systems designers, and electrical engineering students who need to fully understand the state-of-the-art GaN Transistors for Efficient Power Conversion, 3rd Edition is an essential learning tool and reference guide that enables power conversion engineers to design energy-efficient, smaller, and more cost-effective products using GaN transistors.
Author: Markus Cäsar
Publisher:
ISBN: 9783839608975
Category :
Languages : en
Pages : 172
Get Book Here
Book Description
Author: Farid Medjdoub
Publisher: MDPI
ISBN: 3036505660
Category : Technology & Engineering
Languages : en
Pages : 242
Get Book Here
Book Description
Emerging wide bandgap (WBG) semiconductors hold the potential to advance the global industry in the same way that, more than 50 years ago, the invention of the silicon (Si) chip enabled the modern computer era. SiC- and GaN-based devices are starting to become more commercially available. Smaller, faster, and more efficient than their counterpart Si-based components, these WBG devices also offer greater expected reliability in tougher operating conditions. Furthermore, in this frame, a new class of microelectronic-grade semiconducting materials that have an even larger bandgap than the previously established wide bandgap semiconductors, such as GaN and SiC, have been created, and are thus referred to as “ultra-wide bandgap” materials. These materials, which include AlGaN, AlN, diamond, Ga2O3, and BN, offer theoretically superior properties, including a higher critical breakdown field, higher temperature operation, and potentially higher radiation tolerance. These attributes, in turn, make it possible to use revolutionary new devices for extreme environments, such as high-efficiency power transistors, because of the improved Baliga figure of merit, ultra-high voltage pulsed power switches, high-efficiency UV-LEDs, and electronics. This Special Issue aims to collect high quality research papers, short communications, and review articles that focus on wide bandgap device design, fabrication, and advanced characterization. The Special Issue will also publish selected papers from the 43rd Workshop on Compound Semiconductor Devices and Integrated Circuits, held in France (WOCSDICE 2019), which brings together scientists and engineers working in the area of III–V, and other compound semiconductor devices and integrated circuits. In particular, the following topics are addressed: – GaN- and SiC-based devices for power and optoelectronic applications – Ga2O3 substrate development, and Ga2O3 thin film growth, doping, and devices – AlN-based emerging material and devices – BN epitaxial growth, characterization, and devices
Author: D. Nirmal
Publisher: CRC Press
ISBN: 0429862539
Category : Science
Languages : en
Pages : 430
Get Book Here
Book Description
This book focusses on III-V high electron mobility transistors (HEMTs) including basic physics, material used, fabrications details, modeling, simulation, and other important aspects. It initiates by describing principle of operation, material systems and material technologies followed by description of the structure, I-V characteristics, modeling of DC and RF parameters of AlGaN/GaN HEMTs. The book also provides information about source/drain engineering, gate engineering and channel engineering techniques used to improve the DC-RF and breakdown performance of HEMTs. Finally, the book also highlights the importance of metal oxide semiconductor high electron mobility transistors (MOS-HEMT). Key Features Combines III-As/P/N HEMTs with reliability and current status in single volume Includes AC/DC modelling and (sub)millimeter wave devices with reliability analysis Covers all theoretical and experimental aspects of HEMTs Discusses AlGaN/GaN transistors Presents DC, RF and breakdown characteristics of HEMTs on various material systems using graphs and plots
Author: Konstantinos Floros
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
