Properties of Lead-Bismuth, Lead-Tin, Type Metal, and Fusible Alloys (Classic Reprint) PDF Download

Author: J. G. Thompson
Publisher: Forgotten Books
ISBN: 9781528218948
Category :
Languages : en
Pages : 28

Get Book Here

Book Description
Excerpt from Properties of Lead-Bismuth, Lead-Tin, Type Metal, and Fusible Alloys The experimental data show a gradual decrease of elongation with increasing bismuth content, then irregularity in the same region of the limit of solid solubility, and a final rise after the solid solubility is definitely exceeded. Elongation results on cast specimens tend to be irregular as they are influenced by minor imperfections in the castings to a greater degree than are either the tensile strength or hardness. The hardness data show an increase in hardness with increasing bismuth up to about 20 per cent, followed by practically constant values from 20 to 45 per cent, with a final rise at the end of the curve. Irregularities in the region of 30 and 35 per cent are not so pronounced as in the other curves. A few experiments on the susceptibility of these alloys to heat treat ment or to precipitation hardening were performed. Standard - inch test bars were examined in the following conditions: As cast; cast and aged at room temperature; quenched in ice water from 120° C. And pulled immediately; quenched in ice water and aged 24 hours; and annealed by heating to 1200 C. For two hours, fol lowed by slow cooling to room temperature. N 0 significant differ ences were established between the as cast and the cast and aged at room temperature specimens during periods of aging extending up to seven months. The results of the tensile strength determina tions on these heat-treated specimens are shown graphically in Fig ure 4. N o appreciable variation in results, below 35 per cent bismuth. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.