Author: T. Okoshi
Publisher: Springer Science & Business Media
ISBN: 3642700837
Category : Science
Languages : en
Pages : 215
Book Description
Until recently, three principal classes had been known in the electrical cir cuitry. They were as follows: 1) The lumped-constant circuit, which should be called a zero-dimensional circuit, in the sense that the circuit elements are much smaller in size as compared with the wavelength in all three spatial directions. 2) The distributed-constant circuit, which should be called a one-dimensional circuit, in the sense that the circuit elements are much smaller than the wavelength in two directions but comparable to the wavelength in one di rection. 3) The waveguide circuit, which should be called a three-dimensional circuit, in the sense that the circuit elements are comparable to the wavelength in all three directions. The principal subject of this book is the analysis and design (synthesis) theories for another circuit class which appeared in the late 1960s and became common in the 1970s. This new circuit class is 4) the planar circuit, which should be called a two-dimensional circuit, in the sense that the circuit elements are much smaller in size as compared with the wavelength in one direction, but comparable to the wavelength in the other two directions.
Planar Circuits for Microwaves and Lightwaves
Author: T. Okoshi
Publisher: Springer Science & Business Media
ISBN: 3642700837
Category : Science
Languages : en
Pages : 215
Book Description
Until recently, three principal classes had been known in the electrical cir cuitry. They were as follows: 1) The lumped-constant circuit, which should be called a zero-dimensional circuit, in the sense that the circuit elements are much smaller in size as compared with the wavelength in all three spatial directions. 2) The distributed-constant circuit, which should be called a one-dimensional circuit, in the sense that the circuit elements are much smaller than the wavelength in two directions but comparable to the wavelength in one di rection. 3) The waveguide circuit, which should be called a three-dimensional circuit, in the sense that the circuit elements are comparable to the wavelength in all three directions. The principal subject of this book is the analysis and design (synthesis) theories for another circuit class which appeared in the late 1960s and became common in the 1970s. This new circuit class is 4) the planar circuit, which should be called a two-dimensional circuit, in the sense that the circuit elements are much smaller in size as compared with the wavelength in one direction, but comparable to the wavelength in the other two directions.
Publisher: Springer Science & Business Media
ISBN: 3642700837
Category : Science
Languages : en
Pages : 215
Book Description
Until recently, three principal classes had been known in the electrical cir cuitry. They were as follows: 1) The lumped-constant circuit, which should be called a zero-dimensional circuit, in the sense that the circuit elements are much smaller in size as compared with the wavelength in all three spatial directions. 2) The distributed-constant circuit, which should be called a one-dimensional circuit, in the sense that the circuit elements are much smaller than the wavelength in two directions but comparable to the wavelength in one di rection. 3) The waveguide circuit, which should be called a three-dimensional circuit, in the sense that the circuit elements are comparable to the wavelength in all three directions. The principal subject of this book is the analysis and design (synthesis) theories for another circuit class which appeared in the late 1960s and became common in the 1970s. This new circuit class is 4) the planar circuit, which should be called a two-dimensional circuit, in the sense that the circuit elements are much smaller in size as compared with the wavelength in one direction, but comparable to the wavelength in the other two directions.
National Symposium on Advances in Microwaves and Lightwaves
Author:
Publisher: Allied Publishers
ISBN: 9788170237860
Category : Electromagnetic waves
Languages : en
Pages : 514
Book Description
Publisher: Allied Publishers
ISBN: 9788170237860
Category : Electromagnetic waves
Languages : en
Pages : 514
Book Description
advances in microwaves and lightwaves
Author:
Publisher: Allied Publishers
ISBN: 9788177640267
Category :
Languages : en
Pages : 438
Book Description
Publisher: Allied Publishers
ISBN: 9788177640267
Category :
Languages : en
Pages : 438
Book Description
Pulsed EM Field Computation in Planar Circuits
Author: Martin Stumpf
Publisher: CRC Press
ISBN: 1351737783
Category : Science
Languages : en
Pages : 244
Book Description
The pulsed EM characterization of planar circuits is of high practical importance in many areas of science and engineering such as electromagnetic compatibility and antenna design. This book is hence devoted to the mathematical formulation and numerical analysis of arbitrarily-shaped parallel-plane structures concerning their pulsed EM propagation, radiation and scattering behavior. The key emphasis is on the time-domain reciprocity-based integral-equation formulations and their efficient numerical solution.
Publisher: CRC Press
ISBN: 1351737783
Category : Science
Languages : en
Pages : 244
Book Description
The pulsed EM characterization of planar circuits is of high practical importance in many areas of science and engineering such as electromagnetic compatibility and antenna design. This book is hence devoted to the mathematical formulation and numerical analysis of arbitrarily-shaped parallel-plane structures concerning their pulsed EM propagation, radiation and scattering behavior. The key emphasis is on the time-domain reciprocity-based integral-equation formulations and their efficient numerical solution.
Microstrip Antenna Design Handbook
Author: Ramesh Garg
Publisher: Artech House
ISBN: 9780890065136
Category : Technology & Engineering
Languages : en
Pages : 878
Book Description
Based on Bahl and Bhartia's popular 1980 classic, Microstrip Antennas, this all new book provides the detail antenna engineers and designers need to design any type of microstrip antenna. After addressing essential microchip antenna theory, the authors highlight current design and engineering practices, emphasizing the most pressing issues in this area, including broadbanding, circular polarization, and active microstrip antennas in particular. Special design challenges, ranging from dual polarization, high bandwidth, and surface wave mitigation, to choosing the proper substrate, and shaping an antenna to achieve desired results are all covered.
Publisher: Artech House
ISBN: 9780890065136
Category : Technology & Engineering
Languages : en
Pages : 878
Book Description
Based on Bahl and Bhartia's popular 1980 classic, Microstrip Antennas, this all new book provides the detail antenna engineers and designers need to design any type of microstrip antenna. After addressing essential microchip antenna theory, the authors highlight current design and engineering practices, emphasizing the most pressing issues in this area, including broadbanding, circular polarization, and active microstrip antennas in particular. Special design challenges, ranging from dual polarization, high bandwidth, and surface wave mitigation, to choosing the proper substrate, and shaping an antenna to achieve desired results are all covered.
Microwave Circuit Design Using Linear and Nonlinear Techniques
Author: George D. Vendelin
Publisher: John Wiley & Sons
ISBN: 1119741696
Category : Technology & Engineering
Languages : en
Pages : 1200
Book Description
Four leaders in the field of microwave circuit design share their newest insights into the latest aspects of the technology The third edition of Microwave Circuit Design Using Linear and Nonlinear Techniques delivers an insightful and complete analysis of microwave circuit design, from their intrinsic and circuit properties to circuit design techniques for maximizing performance in communication and radar systems. This new edition retains what remains relevant from previous editions of this celebrated book and adds brand-new content on CMOS technology, GaN, SiC, frequency range, and feedback power amplifiers in the millimeter range region. The third edition contains over 200 pages of new material. The distinguished engineers, academics, and authors emphasize the commercial applications in telecommunications and cover all aspects of transistor technology. Software tools for design and microwave circuits are included as an accompaniment to the book. In addition to information about small and large-signal amplifier design and power amplifier design, readers will benefit from the book’s treatment of a wide variety of topics, like: An in-depth discussion of the foundations of RF and microwave systems, including Maxwell’s equations, applications of the technology, analog and digital requirements, and elementary definitions A treatment of lumped and distributed elements, including a discussion of the parasitic effects on lumped elements Descriptions of active devices, including diodes, microwave transistors, heterojunction bipolar transistors, and microwave FET Two-port networks, including S-Parameters from SPICE analysis and the derivation of transducer power gain Perfect for microwave integrated circuit designers, the third edition of Microwave Circuit Design Using Linear and Nonlinear Techniques also has a place on the bookshelves of electrical engineering researchers and graduate students. It’s comprehensive take on all aspects of transistors by world-renowned experts in the field places this book at the vanguard of microwave circuit design research.
Publisher: John Wiley & Sons
ISBN: 1119741696
Category : Technology & Engineering
Languages : en
Pages : 1200
Book Description
Four leaders in the field of microwave circuit design share their newest insights into the latest aspects of the technology The third edition of Microwave Circuit Design Using Linear and Nonlinear Techniques delivers an insightful and complete analysis of microwave circuit design, from their intrinsic and circuit properties to circuit design techniques for maximizing performance in communication and radar systems. This new edition retains what remains relevant from previous editions of this celebrated book and adds brand-new content on CMOS technology, GaN, SiC, frequency range, and feedback power amplifiers in the millimeter range region. The third edition contains over 200 pages of new material. The distinguished engineers, academics, and authors emphasize the commercial applications in telecommunications and cover all aspects of transistor technology. Software tools for design and microwave circuits are included as an accompaniment to the book. In addition to information about small and large-signal amplifier design and power amplifier design, readers will benefit from the book’s treatment of a wide variety of topics, like: An in-depth discussion of the foundations of RF and microwave systems, including Maxwell’s equations, applications of the technology, analog and digital requirements, and elementary definitions A treatment of lumped and distributed elements, including a discussion of the parasitic effects on lumped elements Descriptions of active devices, including diodes, microwave transistors, heterojunction bipolar transistors, and microwave FET Two-port networks, including S-Parameters from SPICE analysis and the derivation of transducer power gain Perfect for microwave integrated circuit designers, the third edition of Microwave Circuit Design Using Linear and Nonlinear Techniques also has a place on the bookshelves of electrical engineering researchers and graduate students. It’s comprehensive take on all aspects of transistors by world-renowned experts in the field places this book at the vanguard of microwave circuit design research.
Development, Validation, and Application of Semi-Analytical Interconnect Models for Efficient Simulation of Multilayer Substrates
Author: Renato Rimolo-Donadio
Publisher: Logos Verlag Berlin GmbH
ISBN: 3832527761
Category : Science
Languages : en
Pages : 226
Book Description
This thesis deals with the development of semi-analytical models for the electrical behavior of vias and traces in chip packages and printed circuit boards. A framework for automated simulation of multilayer structures is also proposed. The validation and evaluation of the models are thoroughly addressed with several test structures and application studies. It is shown that the models can provide good results up to 40 GHz, whereas the numerical efficiency is at least two orders of magnitude higher in comparison to general-purpose numerical methods.
Publisher: Logos Verlag Berlin GmbH
ISBN: 3832527761
Category : Science
Languages : en
Pages : 226
Book Description
This thesis deals with the development of semi-analytical models for the electrical behavior of vias and traces in chip packages and printed circuit boards. A framework for automated simulation of multilayer structures is also proposed. The validation and evaluation of the models are thoroughly addressed with several test structures and application studies. It is shown that the models can provide good results up to 40 GHz, whereas the numerical efficiency is at least two orders of magnitude higher in comparison to general-purpose numerical methods.
Advances in Imaging and Electron Physics
Author:
Publisher: Academic Press
ISBN: 0123946360
Category : Technology & Engineering
Languages : en
Pages : 521
Book Description
Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. This series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains. - Contributions from leading authorities - Informs and updates on all the latest developments in the field
Publisher: Academic Press
ISBN: 0123946360
Category : Technology & Engineering
Languages : en
Pages : 521
Book Description
Advances in Imaging and Electron Physics merges two long-running serials--Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. This series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains. - Contributions from leading authorities - Informs and updates on all the latest developments in the field
Passive Macromodeling
Author: Stefano Grivet-Talocia
Publisher: John Wiley & Sons
ISBN: 1119140978
Category : Technology & Engineering
Languages : en
Pages : 903
Book Description
Offers an overview of state of the art passive macromodeling techniques with an emphasis on black-box approaches This book offers coverage of developments in linear macromodeling, with a focus on effective, proven methods. After starting with a definition of the fundamental properties that must characterize models of physical systems, the authors discuss several prominent passive macromodeling algorithms for lumped and distributed systems and compare them under accuracy, efficiency, and robustness standpoints. The book includes chapters with standard background material (such as linear time-invariant circuits and systems, basic discretization of field equations, state-space systems), as well as appendices collecting basic facts from linear algebra, optimization templates, and signals and transforms. The text also covers more technical and advanced topics, intended for the specialist, which may be skipped at first reading. Provides coverage of black-box passive macromodeling, an approach developed by the authors Elaborates on main concepts and results in a mathematically precise way using easy-to-understand language Illustrates macromodeling concepts through dedicated examples Includes a comprehensive set of end-of-chapter problems and exercises Passive Macromodeling: Theory and Applications serves as a reference for senior or graduate level courses in electrical engineering programs, and to engineers in the fields of numerical modeling, simulation, design, and optimization of electrical/electronic systems. Stefano Grivet-Talocia, PhD, is an Associate Professor of Circuit Theory at the Politecnico di Torino in Turin, Italy, and President of IdemWorks. Dr. Grivet-Talocia is author of over 150 technical papers published in international journals and conference proceedings. He invented several algorithms in the area of passive macromodeling, making them available through IdemWorks. Bjørn Gustavsen, PhD, is a Chief Research Scientist in Energy Systems at SINTEF Energy Research in Trondheim, Norway. More than ten years ago, Dr. Gustavsen developed the original version of the vector fitting method with Prof. Semlyen at the University of Toronto. The vector fitting method is one of the most widespread approaches for model extraction. Dr. Gustavsen is also an IEEE fellow.
Publisher: John Wiley & Sons
ISBN: 1119140978
Category : Technology & Engineering
Languages : en
Pages : 903
Book Description
Offers an overview of state of the art passive macromodeling techniques with an emphasis on black-box approaches This book offers coverage of developments in linear macromodeling, with a focus on effective, proven methods. After starting with a definition of the fundamental properties that must characterize models of physical systems, the authors discuss several prominent passive macromodeling algorithms for lumped and distributed systems and compare them under accuracy, efficiency, and robustness standpoints. The book includes chapters with standard background material (such as linear time-invariant circuits and systems, basic discretization of field equations, state-space systems), as well as appendices collecting basic facts from linear algebra, optimization templates, and signals and transforms. The text also covers more technical and advanced topics, intended for the specialist, which may be skipped at first reading. Provides coverage of black-box passive macromodeling, an approach developed by the authors Elaborates on main concepts and results in a mathematically precise way using easy-to-understand language Illustrates macromodeling concepts through dedicated examples Includes a comprehensive set of end-of-chapter problems and exercises Passive Macromodeling: Theory and Applications serves as a reference for senior or graduate level courses in electrical engineering programs, and to engineers in the fields of numerical modeling, simulation, design, and optimization of electrical/electronic systems. Stefano Grivet-Talocia, PhD, is an Associate Professor of Circuit Theory at the Politecnico di Torino in Turin, Italy, and President of IdemWorks. Dr. Grivet-Talocia is author of over 150 technical papers published in international journals and conference proceedings. He invented several algorithms in the area of passive macromodeling, making them available through IdemWorks. Bjørn Gustavsen, PhD, is a Chief Research Scientist in Energy Systems at SINTEF Energy Research in Trondheim, Norway. More than ten years ago, Dr. Gustavsen developed the original version of the vector fitting method with Prof. Semlyen at the University of Toronto. The vector fitting method is one of the most widespread approaches for model extraction. Dr. Gustavsen is also an IEEE fellow.
Applications of Advanced Electromagnetics
Author: Guennadi A. Kouzaev
Publisher: Springer Science & Business Media
ISBN: 3642303102
Category : Technology & Engineering
Languages : en
Pages : 542
Book Description
This text, directed to the microwave engineers and Master and PhD students, is on the use of electromagnetics to the development and design of advanced integrated components distinguished by their extended field of applications. The results of hundreds of authors scattered in numerous journals and conference proceedings are carefully reviewed and classed. Several chapters are to refresh the knowledge of readers in advanced electromagnetics. New techniques are represented by compact electromagnetic–quantum equations which can be used in modeling of microwave-quantum integrated circuits of future In addition, a topological method to the boundary value problem analysis is considered with the results and examples. One extended chapter is for the development and design of integrated components for extended bandwidth applications, and the technology and electromagnetic issues of silicon integrated transmission lines, transitions, filters, power dividers, directional couplers, etc are considered. Novel prospective interconnects based on different physical effects are reviewed as well. The ideas of topology is applicable to the electromagnetic signaling and computing, when the vector field maps can carry discrete information, and this area and the results in topological signaling obtained by different authors are analyzed, including the recently designed predicate logic processor operating spatially represented signal units. The book is rich of practical examples, illustrations, and references and useful for the specialists working at the edge of contemporary technology and electromagnetics.
Publisher: Springer Science & Business Media
ISBN: 3642303102
Category : Technology & Engineering
Languages : en
Pages : 542
Book Description
This text, directed to the microwave engineers and Master and PhD students, is on the use of electromagnetics to the development and design of advanced integrated components distinguished by their extended field of applications. The results of hundreds of authors scattered in numerous journals and conference proceedings are carefully reviewed and classed. Several chapters are to refresh the knowledge of readers in advanced electromagnetics. New techniques are represented by compact electromagnetic–quantum equations which can be used in modeling of microwave-quantum integrated circuits of future In addition, a topological method to the boundary value problem analysis is considered with the results and examples. One extended chapter is for the development and design of integrated components for extended bandwidth applications, and the technology and electromagnetic issues of silicon integrated transmission lines, transitions, filters, power dividers, directional couplers, etc are considered. Novel prospective interconnects based on different physical effects are reviewed as well. The ideas of topology is applicable to the electromagnetic signaling and computing, when the vector field maps can carry discrete information, and this area and the results in topological signaling obtained by different authors are analyzed, including the recently designed predicate logic processor operating spatially represented signal units. The book is rich of practical examples, illustrations, and references and useful for the specialists working at the edge of contemporary technology and electromagnetics.