Performance Evaluation of Warm-Mix Recycled Asphalt Binders After Long-Term Aging PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Performance Evaluation of Warm-Mix Recycled Asphalt Binders After Long-Term Aging PDF full book. Access full book title Performance Evaluation of Warm-Mix Recycled Asphalt Binders After Long-Term Aging by Qiang Li. Download full books in PDF and EPUB format.
Author: Qiang Li
Publisher:
ISBN:
Category : Asphalt emulsion mixtures
Languages : en
Pages : 16
Get Book Here
Book Description
This study evaluates the pavement performance evolution of warm-mix recycled asphalt binders during the secondary service period. Warm-mix recycled asphalt binders with various long-term aging levels and recycling plans were produced by the laboratory simulation method. Conventional physical properties tests, the dynamic shear rheometer test, and the bending beam rheometer test were conducted to measure the performance of recycled binders. Effects of the aging level and recycling plan on the resistance to rutting, fatigue cracking, and low temperature cracking were investigated by statistical methods. It was found that after secondary long-term aging, recycled binders are more resistant to rutting, while they are less resistant to fatigue and low temperature cracking. The modified aging kinetic model can be used to accurately characterize the effect of secondary aging time on rutting or fatigue factors for recycled binders. The resistance of aged binders to fatigue and low temperature cracking is obviously improved by adding the warm mix asphalt additive. By comparison, using styrene butadiene rubber latex enhances the binder performance in almost all aspects. The aging level has a more significant effect than the recycling plan for all performance parameters.
Author: Qiang Li
Publisher:
ISBN:
Category : Asphalt emulsion mixtures
Languages : en
Pages : 16
Get Book Here
Book Description
This study evaluates the pavement performance evolution of warm-mix recycled asphalt binders during the secondary service period. Warm-mix recycled asphalt binders with various long-term aging levels and recycling plans were produced by the laboratory simulation method. Conventional physical properties tests, the dynamic shear rheometer test, and the bending beam rheometer test were conducted to measure the performance of recycled binders. Effects of the aging level and recycling plan on the resistance to rutting, fatigue cracking, and low temperature cracking were investigated by statistical methods. It was found that after secondary long-term aging, recycled binders are more resistant to rutting, while they are less resistant to fatigue and low temperature cracking. The modified aging kinetic model can be used to accurately characterize the effect of secondary aging time on rutting or fatigue factors for recycled binders. The resistance of aged binders to fatigue and low temperature cracking is obviously improved by adding the warm mix asphalt additive. By comparison, using styrene butadiene rubber latex enhances the binder performance in almost all aspects. The aging level has a more significant effect than the recycling plan for all performance parameters.
Author: Faramarz Farshidi
Publisher:
ISBN: 9781267758804
Category :
Languages : en
Pages :
Get Book Here
Book Description
In recent years Warm Mix Asphalt (WMA) technologies have been used to modify asphalt binders, with the following objectives: to decrease production and construction temperatures, reduce fumes and emissions, increase haul distance, and improve the workability of the mix. Reduced temperatures at the plant and during laydown and compaction are hypothesized to positively impact long-term oxidative aging behavior due to less oxidation/aging and result in less emissions during production and construction due to reduced production and construction temperatures. The purpose of this investigation was to quantify these improvements with respect to long-term oxidative aging in the field and environmental benefits with respect to volatile organic compounds, semi-volatile organic compounds and poly cyclic aromatic hydrocarbons in order to confirm or deny this hypothesis. This research evaluated the potential durability of WMA and Rubberized Warm Mix Asphalt (R-WMA) binders with respect to long-term aging through characterization of field-aged binders extracted and recovered from field cores. The results were compared to the control conventional Hot Mix Asphalt (HMA) and Rubberized Hot Mix Asphalt (R-HMA) samples. Binders were extracted and recovered from thirteen different test sections and a total of seven different WMA technologies were evaluated in this study. The Dynamic Shear Rheometer (DSR) was used to evaluate the rheological properties of the binders at high temperatures with respect to rutting performance in the field. The Bending Beam Rheometer (BBR) was used to characterize low temperature properties of the binder samples. A new testing procedure was developed to measure and characterize the rheological properties of the R-HMA and R-WMA binders with respect to performance-related properties in the field. The rheological results indicated that depending on the WMA technology used, the addition of WMA technologies and reduced production and compaction temperatures result in increase or decrease rutting resistance performance for WMA and R-WMA binders with respect to permanent deformation at high temperatures in the field. Both WMA and R-WMA binders studied meet the established thermal cracking criteria with respect to low temperature cracking in the field. The aging kinetics curves for WMA-treated binders are parallel to the control binders and the addition of WMA technologies including organic, chemical and mechanical foaming technologies studied in this research did not result in a different aging kinetics trend with respect to long-term aging in the field. A portable "flux" chamber was designed and fabricated to capture and directly measure emissions during paving operations. Emissions were collected in activated charcoal sorbent tubes for characterizing volatile organic compounds and semi-volatile organic compounds. XAD-2 resin tubes and filters were used to capture the gaseous phase and particulate phase of the PAH compounds, respectively. A reliable analytical method was developed to identify and quantify alkane emissions using gas chromatography mass spectrometry (GC/MS) in the laboratory. A separate method was developed for identification and characterization of trace level PAH compounds of the asphalt fumes. The results demonstrated that the warm mix asphalt technology type, plant mixing temperature and level of compaction significantly influence the emission characteristics throughout paving operations. Moreover, the emissions kinetics indicated that the majority of the reactive organic gases are volatilized in the first hour after sampling initiation (immediately after production and before compaction). To better understand and identify any chemical composition changes of the binder due to WMA technologies, nuclear magnetic resonance spectroscopy (NMR) was used for understanding structural complexities of HMA and WMA binder molecules. Qualitative analysis of both carbon and hydrogen atoms with HMA and WMA binders showed that the molecular structures of the binders are not significantly changed by the effect of WMA technologies.
Author: Hakseo Kim
Publisher:
ISBN:
Category : Binders
Languages : en
Pages : 7
Get Book Here
Book Description
The performance properties of recycled polymer modified asphalt (PMA) binders containing warm mix asphalt (WMA) additives at high, intermediate, and low temperatures were evaluated. First, each combination of two PMA binders (performance grade (PG) 76-22 from two different sources) and two WMA additives (i.e., Aspha-min® and Sasobit®) were blended to produce warm PMA binders. They were then artificially short-term and long-term aged through the rolling thin film oven and pressure aging vessel procedures. Second, long-term aged warm PMA binders were recycled using two virgin binders (PG 76-22 and PG 70-22), and the recycled binders were artificially aged again. Lastly, Superpave binder tests were performed through the rotational viscometer, the dynamic shear rheometer (DSR), and the bending beam rheometer (BBR). In general, the results of this study suggested that (1) the WMA additives and the aged PMA binders were found to have a significant influence on the performance properties of recycled binders (measured by the DSR and the BBR); (2) the use of PG 70-22 as a virgin binder was effective in offsetting the increase of binder stiffness due to the additives and the aged binders; and (3) the recycled warm PMA binders can result in satisfactory binder performance that meets current Superpave binder requirements.
Author: Y. Richard Kim
Publisher:
ISBN: 9780309446839
Category : Pavements, Asphalt
Languages : en
Pages : 104
Get Book Here
Book Description
Author:
Publisher: Transportation Research Board
ISBN: 0309155649
Category : Asphalt concrete
Languages : en
Pages : 285
Get Book Here
Book Description
Author: Zelalem Arega
Publisher:
ISBN:
Category : Asphalt concrete
Languages : en
Pages : 4
Get Book Here
Book Description
The main objective of this research study was to evaluate the influence of warm mix additives on the rheology and performance characteristics of asphalt binders with emphasis on the affects of long-term aging and use of recycled asphalt binder. In order to achieve this objective the asphalt binders were first screened based on their chemical makeup. The selected asphalt binders were combined with different warm mix asphalt additives and evaluated for their mechanical properties. Subsets of these binders were also used to evaluate the affect of long-term aging and the affect of using recycled asphalt binder on performance characteristics. Tests were also conducted using a limited number of sand-asphalt mortars and full asphalt mixtures to further corroborate the findings from the binder study.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 192
Get Book Here
Book Description
Author: Brian Hill
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Sustainability is a cornerstone of today0́9s engineering world. Warm mix asphalt (WMA) and reclaimed asphalt pavement (RAP) are the most prominent sustainable materials in asphalt concrete pavements. WMA is a not a new concept, however new innovations and increased usage of WMA has been spurred by the increased focus on sustainable infrastructure systems. WMA enables reduced production temperatures through the use of wax, water, or other chemical packages. The effects of reduced production temperatures include fuel use and emissions reductions, improved compaction, and possible RAP concentration increases. RAP is the primary recycled product of the aged asphalt concrete pavements and its use leads to reductions in virgin aggregate and asphalt demand. However, significant performance issues can stem from the individual integration of WMA or RAP materials in asphalt concrete. In particular, WMA technologies can increase moisture and rutting susceptibility while RAP significantly increases the stiffness of the resulting mixture. Consequently, quality performance of sustainable asphalt pavements may require the combined use of WMA and RAP to produce mixtures with sufficient stiffness and moisture and fracture resistance. This study evaluates the potential of WMA technologies and their integration with RAP. Initially, an extensive literature review was completed to understand the advantages, disadvantages, and past field and lab performance of WMA and RAP mixtures. Rotational viscometer and bending beam rheometer tests were then used to evaluate Sasobit, Evotherm M1, and Advera WMA modified and unmodified binders. Finally, virgin and 45% RAP mixtures were designed and tested to examine the rutting, moisture, and fracture resistance of WMA and HMA mixtures. The results of this experiment provided several key observations. First, viscosity reductions may not be the primary cause for the availability of reduced production temperatures for WMA technologies. Second, WMA additive properties have a significant effect upon fracture, moisture, and rutting resistance. Furthermore, the addition of RAP to WMA mixtures improved the rutting and moisture sensitivity performance as characterized in the Hamburg and Tensile Strength Ratio testing procedures.
Author: Rubben Lolly
Publisher:
ISBN:
Category : Binders (Materials)
Languages : en
Pages : 97
Get Book Here
Book Description
Heating of asphalt during production and construction causes the volatilization and oxidation of binders used in mixes. Volatilization and oxidation causes degradation of asphalt pavements by increasing the stiffness of the binders, increasing susceptibility to cracking and negatively affecting the functional and structural performance of the pavements. Degradation of asphalt binders by volatilization and oxidation due to high production temperature occur during early stages of pavement life and are known as Short Term Aging (STA). Elevated temperatures and increased exposure time to elevated temperatures causes increased STA of asphalt. The objective of this research was to investigate how elevated mixing temperatures and exposure time to elevated temperatures affect aging and stiffening of binders, thus influencing properties of the asphalt mixtures. The study was conducted in two stages. The first stage evaluated STA effect of asphalt binders. It involved aging two Performance Graded (PG) virgin asphalt binders, PG 76-16 and PG 64-22 at two different temperatures and durations, then measuring their viscosities. The second stage involved evaluating the effects of elevated STA temperature and time on properties of the asphalt mixtures. It involved STA of asphalt mixtures produced in the laboratory with the PG 64-22 binder at mixing temperatures elevated 25OF above standard practice; STA times at 2 and 4 hours longer than standard practices, and then compacted in a gyratory compactor. Dynamic modulus (E*) and Indirect Tensile Strength (IDT) were measured for the aged mixtures for each temperature and duration to determine the effect of different aging times and temperatures on the stiffness and fatigue properties of the aged asphalt mixtures. The binder test results showed that in all cases, there was increased viscosity. The results showed the highest increase in viscosity resulted from increased aging time. The results also indicated that PG 64-22 was more susceptible to elevated STA temperature and extended time than the PG 76-16 binders. The asphalt mixture test results confirmed the expected outcome that increasing the STA and mixing temperature by 25oF alters the stiffness of mixtures. Significant change in the dynamic modulus mostly occurred at four hour increase in STA time regardless of temperature.
Author: Ala R. Abbas
Publisher:
ISBN:
Category : Asphalt
Languages : en
Pages : 99
Get Book Here
Book Description
