Performance evaluation of one-coat systems on new steel bridges PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Performance evaluation of one-coat systems on new steel bridges PDF full book. Access full book title Performance evaluation of one-coat systems on new steel bridges by . Download full books in PDF and EPUB format.
Author:
Publisher:
ISBN:
Category : Iron and steel bridges
Languages : en
Pages : 4
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Iron and steel bridges
Languages : en
Pages : 4
Get Book Here
Book Description
Author: Margaret S. Criswell
Publisher: Nova Science Publishers
ISBN: 9781631171581
Category : Iron and steel bridges
Languages : en
Pages : 0
Get Book Here
Book Description
The Federal Highway Administration 100-Year Coating Study was initiated in August 2009 to identify coating systems that can provide 100 years of virtually maintenance-free service life at comparable costs to the existing coating systems, even in adverse environments. This book focuses on the study and discusses the performance evaluation of one-coat systems for new steel bridges.
Author: Margaret S. Criswell
Publisher:
ISBN: 9781631171666
Category : Electronic books
Languages : en
Pages : 156
Get Book Here
Book Description
The Federal Highway Administration 100-Year Coating Study was initiated in August 2009 to identify coating systems that can provide 100 years of virtually maintenance-free service life at comparable costs to the existing coating systems, even in adverse environments. This book focuses on the study and discusses the performance evaluation of one-coat systems for new steel bridges.
Author: Christopher Wolfgram
Publisher:
ISBN:
Category : Iron and steel bridges
Languages : en
Pages : 129
Get Book Here
Book Description
The purpose of this project was to identify efficient and cost-effective methodologies for maintenance painting of steel bridges for MnDOT bridge crews to extend the service life of the coating system by at least five years before complete coating rehabilitation would be warranted. Five generic coating systems, chosen for their compatibility with existing MnDOT coating systems and minimal requirements for surface preparation and application, were applied over minimally prepared surfaces on two St. Paul bridges. Coating performance was evaluated annually over a three-year period through visual field observation following the MnDOT Steel Bridge Coating Condition Assessment Photographic Field Guide and MnDOT Bridge and Structure Inspection Program Manual. Adhesion testing was performed in accordance with ASTM D3359 in conjunction with the third-year evaluation. The results were photographed and documented in a matrix, identifying key performance characteristics. The predominant failure affecting two of the coating systems was delamination due to application over an anti-graffiti finish coat. Otherwise, each system performed to a standard aligning with the pre-established project goal for expanded serviceability of five years. Because developing a Bridge Maintenance Coating Program requires critical timing in the inspection process to identify existing coating condition, a Bridge Coating Repair Reference Table was developed to assist MnDOT crews with determining the appropriate preventive maintenance painting strategy based on condition and existing coating system. This work also determined that surface conditions demonstrating pitting with rusting, or surfaces with an anti-graffiti coating should not be addressed through maintenance painting but instead should be considered for coating removal and replacement.
Author:
Publisher:
ISBN:
Category : Bridges, Iron and steel
Languages : en
Pages : 128
Get Book Here
Book Description
The recently promulgated environmental regulations concerning volatile organic compounds (VOC) and certain hazardous heavy metals have had a great impact on the bridge painting industry. As a response to these regulations, many of the major coating manufacturers now offer "environmentally acceptable" alternative coating systems to replace those traditionally used on bridge structures. The Federal Highway Administration sponsored a 7-year study to determine the relative corrosion control performance of these newly available coating systems. The most promising coating systems were selected for long-term field evaluation based on accelerated test performance. The long-term exposure testing was conducted for 5 years in three marine locations. Panels were exposed on two bridges, one in New Jersey and one in southern Louisiana. The third long-term exposure location was in Sea Isle City, New Jersey. Thirteen coating systems were included for long-term exposure testing.
Author: John Joseph Myers
Publisher:
ISBN:
Category : Iron and steel bridges
Languages : en
Pages : 0
Get Book Here
Book Description
"Task 1 of this project was to survey the performance of coating systems for steel bridges in Missouri and to evaluate coating and recoating practices. Task 1 was led under the direction of Dr. Glenn Washer from the University of Missouri located in Columbia, MO. A specific literature review focused on current state-of-the-practice for overcoatings, bridge coating assessment and rating, deterioration rate modeling as well as the risk assessment for overcoating. A new coating evaluation guideline was created to meet the needs of bridge maintenance in Missouri. Finally a field survey was carried out onto the existing bridge coatings across 10 Missouri Department of Transportation (MoDOT) districts and 26 counties. It was found that system S and G perform very well in many of the situations observed. The survey indicated that in many cases system S overcoatings are providing service life extension for the coating system, with some early failures resulting from severe exposure to deck drainage and corrosion. Deck condition, drainage, and joint conditions were found to be the dominate factor in deterioration of the coating system, regardless of the age of the coating. Task 2 of this project investigated the performance of new types of coating technologies on bridge corrosion mitigation and was led under the direction of Dr. John Myers from the Missouri University of Science and Technology located in Rolla, MO. Twelve coating systems including MoDOT system G were evaluated through several laboratory tests to study and predict the field performance and durability of new coating technologies. The new coating systems investigated in this study involved polyurea, polyaspartic polyurea, polysiloxane polymers and fluoropolymer. To date, these coating system technologies have not been used as a steel structural coatings system in the State of Missouri by MoDOT. The laboratory tests consist of freeze-thaw stability, salt fog resistance, QUV weathering and electrochemical tests. The comparison study was carried out to benchmark and understand the pros and cons of these new coating systems. In addition, two coating systems served as overcoating studies for lead-based paint systems representative of older existing bridges in the state of Missouri. These overcoating systems were evaluated using an accelerated lab test method and electrochemical test. The performance of the existing MoDOT calcium sulfonate (CSA) overcoating system (system S) was also studied within the test matrix for comparative purposes. The test results show that moisture cured urethane micaceous iron oxide zinc/polyurea polyaspartic is a promising coating system for recoating of new steel bridges and that aliphatic polyaspartic polyurea can also be applied on existing coatings after the surface is properly prepared"--Technical report documentation page.
Author:
Publisher:
ISBN:
Category : Highway research
Languages : en
Pages : 64
Get Book Here
Book Description
Author: R. Liu
Publisher:
ISBN:
Category : Chlorides
Languages : en
Pages : 41
Get Book Here
Book Description
Author: John Joseph Myers
Publisher:
ISBN:
Category : Iron and steel bridges
Languages : en
Pages :
Get Book Here
Book Description
"Task 1 of this project was to survey the performance of coating systems for steel bridges in Missouri and to evaluate coating and recoating practices. Task 1 was led under the direction of Dr. Glenn Washer from the University of Missouri located in Columbia, MO. A specific literature review focused on current state-of-the-practice for overcoatings, bridge coating assessment and rating, deterioration rate modeling as well as the risk assessment for overcoating. A new coating evaluation guideline was created to meet the needs of bridge maintenance in Missouri. Finally a field survey was carried out onto the existing bridge coatings across 10 Missouri Department of Transportation (MoDOT) districts and 26 counties. It was found that system S and G perform very well in many of the situations observed. The survey indicated that in many cases system S overcoatings are providing service life extension for the coating system, with some early failures resulting from severe exposure to deck drainage and corrosion. Deck condition, drainage, and joint conditions were found to be the dominate factor in deterioration of the coating system, regardless of the age of the coating. Task 2 of this project investigated the performance of new types of coating technologies on bridge corrosion mitigation and was led under the direction of Dr. John Myers from the Missouri University of Science and Technology located in Rolla, MO. Twelve coating systems including MoDOT system G were evaluated through several laboratory tests to study and predict the field performance and durability of new coating technologies. The new coating systems investigated in this study involved polyurea, polyaspartic polyurea, polysiloxane polymers and fluoropolymer. To date, these coating system technologies have not been used as a steel structural coatings system in the State of Missouri by MoDOT. The laboratory tests consist of freeze-thaw stability, salt fog resistance, QUV weathering and electrochemical tests. The comparison study was carried out to benchmark and understand the pros and cons of these new coating systems. In addition, two coating systems served as overcoating studies for lead-based paint systems representative of older existing bridges in the state of Missouri. These overcoating systems were evaluated using an accelerated lab test method and electrochemical test. The performance of the existing MoDOT calcium sulfonate (CSA) overcoating system (system S) was also studied within the test matrix for comparative purposes. The test results show that moisture cured urethane micaceous iron oxide zinc/polyurea polyaspartic is a promising coating system for recoating of new steel bridges and that aliphatic polyaspartic polyurea can also be applied on existing coatings after the surface is properly prepared"--Technical report documentation page.
Author: Yunping Xi
Publisher:
ISBN:
Category : Concrete bridges
Languages : en
Pages : 166
Get Book Here
Book Description
Corrosion of reinforced concrete structures has been a significant problem for many state and transportation agencies since the application of deicing salts was introduced. Much research has been conducted to develop corrosion protection systems that can prolong the life span of reinforced concrete structures. The Colorado Department of Transportation (CDOT) has several routine and experimental measures to prevent corrosion of the rebar including epoxy-coated rebar, calcium nitrite admixture, organic corrosion inhibitors, a thick cover of quality concrete, and a waterproofing membrane covered by an asphalt overlay. An extensive literature review was performed to collect information on various corrosion protection systems that have been used in the U.S. and around the world. Current CDOT practices in terms of corrosion protection measures were reviewed. A draft inspection plan for Colorado's bridge structures was proposed.
