Numerical Simulations of Stationary and Transient Spray Combustion for Aircraft Gas Turbine Applications PDF Download

Author: Athanase Alain Fossi
Publisher:
ISBN:
Category :
Languages : en
Pages : 293

Get Book Here

Book Description
The development of current and future aero gas turbine engines is mainly focused on the safety, the performance, the energy consumption, and increasingly on the reduction of pollutants and noise level. To this end, the engine's design phases are subjected to improving processes continuously through experimental and numerical investigations. The present thesis is concerned with the simulation of transient and steady combustion regimes in an aircraft gas turbine operating under various combustion modes. Particular attention is paid to the accuracy of the results, the computational cost, and the ease of handling the numerical tool from an industrial standpoint. Thus, a commercial Computational Fluid Dynamics (CFD) code widely used in industry is selected as the numerical tool. A CFD methodology consisting of its advanced turbulence and combustion models, coupled with a subgrid spark-based ignition model, is formulated with the final goal of predicting the whole ignition sequence under cold start and altitude relight conditions, and the main flame trends in the steady combustion regime. At first, attention is focused on the steady combustion regime. Various CFD methodologies are formulated using three turbulence models, namely, the Unsteady Reynolds-Averaged Navier-Stokes (URANS), the Scale-Adaptive Simulation (SAS), and the Large Eddy Simulation (LES) models. To appraise the relevance of incorporating a realistic chemistry model and chemical non-equilibrium effects, two different assumptions are considered, namely, the infinitely-fast chemistry through the partial equilibrium model, and the finite-rate chemistry through the diffusion flamelet model. For each of the two assumptions, both one-component and two-component fuels are considered as surrogates for kerosene (Jet A-1). The resulting CFD models are applied to a swirl-stabilized combustion chamber to assess their ability to retrieve the spray flow and combustion properties in the steady combustion regime. Subsequently, the ratios between the accuracy of the results and the computational cost of the three CFD methodologies are explicitly compared. The second intermediate study is devoted to the ignition sequence preceding the steady combustion regime. A bluff-body stabilized burner based on gaseous fuel, and employing a spark-based igniter, is considered to calibrate the CFD model formulated. This burner of relatively simple geometry can provide greater understanding of complex reactive flow features, especially with regard to ignitability and stability. The most robust of the CFD methodologies formulated in the previous configuration is reconsidered. As this burner involves a partially-premixed combustion mode, a combustion model based on the mixture fraction-progress variable formulation is adopted with the assumptions of infinitely-fast chemistry and finite-rate chemistry through the Bray-Moss-Libby (BML) and Flamelet Generated Manifold (FGM) models, respectively. The ignition model is first customized by implementing the properties of the flame considered. Thereafter, the customized ignition model is coupled to the LES solver and combustion models based on the two above-listed assumptions. To assess the predictive capabilities of the resulting CFD methodologies, the latter are used to predict ignition events resulting from the spark deposition at various locations of the burner, and the results are quantitatively and qualitatively validated by comparing the latter to their experimental counterparts. Finally, the CFD methodology validated in the gaseous configuration is extended to spray combustion by first coupling the latter to the spray module, and by implementing the flame properties of kerosene in the ignition model. The resulting CFD model is first applied to the swirl-stabilized combustor investigated previously, with the aim of predicting the whole ignition sequence and improving the previous predictions of the combustion properties in the resulting steady regime. Subsequently, the CFD methodology is applied to a scaled can combustor with the aim of predicting ignition events under cold start and altitude relight operating conditions. The ability of the CFD methodology to predict ignition events under the two operating conditions is assessed by contrasting the numerical predictions to the corresponding experimental ignition envelopes. A qualitative validation of the ignition sequence is also done by comparing the numerical ignition sequence to the high-speed camera images of the corresponding ignition event.