Author: https://www.codeofchina.com
Publisher: https://www.codeofchina.com
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 36
Book Description
1 Scope This part of GB/T 3323 specifies techniques of radiographic examination of fusion welded joints of metallic materials. This part is applicable to the radiographic examination of welded joints of plates and pipes or other welded joints. This part does not specify acceptance levels for radiographic examination of welded joints of metallic materials. If contracting parties apply lower test criteria, it is possible that the quality of tested image is declined significantly. Note: This part meets the requirements of GB/T 19943, and the detector used is film. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 9445 Non-destructive testing - Qualification and certification of NDT personnel (GB/T 9445-2015, ISO 9712:2012, IDT) GB/T 12604.2 Non-destructive testing - Terminology - Terms used in radiographic testing (GB/T 12604.2-2005, ISO 5576:1997, IDT) GB/T 19348.1 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (GB/T 19348.1-2014, ISO 11699-1:2008, MOD) GB/T 19348.2 Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (GB/T 19348.2-2003, ISO 11699-2:1998, IDT) GB/T 19802 Non-destructive testing - Industrial radiographic illuminators - Minimum requirements (GB/T 19802-2005, ISO 5580:1985, IDT) GB/T 19943 Non-destructive test - Radiographic examination of metallic materials by X- and gamma-rays - Basic rules (GB/T 19943-2005, ISO 5579:1998, IDT) GB/T 23901.1 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (GB/T 23901.1-2019, ISO 19232-1:2013, IDT) GB/T 23901.2 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (GB/T 23901.2-2019, ISO 19232-2:2013, 1DT) GB/T 23901.4 Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables (GB/T 23901.4-2019, ISO 19232-4:2013, IDT) GB/T 25758 (All parts) Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing
GB/T 3323.1-2019 English Translation of Chinese Standard
Author: https://www.codeofchina.com
Publisher: https://www.codeofchina.com
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 36
Book Description
1 Scope This part of GB/T 3323 specifies techniques of radiographic examination of fusion welded joints of metallic materials. This part is applicable to the radiographic examination of welded joints of plates and pipes or other welded joints. This part does not specify acceptance levels for radiographic examination of welded joints of metallic materials. If contracting parties apply lower test criteria, it is possible that the quality of tested image is declined significantly. Note: This part meets the requirements of GB/T 19943, and the detector used is film. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 9445 Non-destructive testing - Qualification and certification of NDT personnel (GB/T 9445-2015, ISO 9712:2012, IDT) GB/T 12604.2 Non-destructive testing - Terminology - Terms used in radiographic testing (GB/T 12604.2-2005, ISO 5576:1997, IDT) GB/T 19348.1 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (GB/T 19348.1-2014, ISO 11699-1:2008, MOD) GB/T 19348.2 Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (GB/T 19348.2-2003, ISO 11699-2:1998, IDT) GB/T 19802 Non-destructive testing - Industrial radiographic illuminators - Minimum requirements (GB/T 19802-2005, ISO 5580:1985, IDT) GB/T 19943 Non-destructive test - Radiographic examination of metallic materials by X- and gamma-rays - Basic rules (GB/T 19943-2005, ISO 5579:1998, IDT) GB/T 23901.1 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (GB/T 23901.1-2019, ISO 19232-1:2013, IDT) GB/T 23901.2 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (GB/T 23901.2-2019, ISO 19232-2:2013, 1DT) GB/T 23901.4 Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables (GB/T 23901.4-2019, ISO 19232-4:2013, IDT) GB/T 25758 (All parts) Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing
Publisher: https://www.codeofchina.com
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 36
Book Description
1 Scope This part of GB/T 3323 specifies techniques of radiographic examination of fusion welded joints of metallic materials. This part is applicable to the radiographic examination of welded joints of plates and pipes or other welded joints. This part does not specify acceptance levels for radiographic examination of welded joints of metallic materials. If contracting parties apply lower test criteria, it is possible that the quality of tested image is declined significantly. Note: This part meets the requirements of GB/T 19943, and the detector used is film. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 9445 Non-destructive testing - Qualification and certification of NDT personnel (GB/T 9445-2015, ISO 9712:2012, IDT) GB/T 12604.2 Non-destructive testing - Terminology - Terms used in radiographic testing (GB/T 12604.2-2005, ISO 5576:1997, IDT) GB/T 19348.1 Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (GB/T 19348.1-2014, ISO 11699-1:2008, MOD) GB/T 19348.2 Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (GB/T 19348.2-2003, ISO 11699-2:1998, IDT) GB/T 19802 Non-destructive testing - Industrial radiographic illuminators - Minimum requirements (GB/T 19802-2005, ISO 5580:1985, IDT) GB/T 19943 Non-destructive test - Radiographic examination of metallic materials by X- and gamma-rays - Basic rules (GB/T 19943-2005, ISO 5579:1998, IDT) GB/T 23901.1 Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (GB/T 23901.1-2019, ISO 19232-1:2013, IDT) GB/T 23901.2 Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (GB/T 23901.2-2019, ISO 19232-2:2013, 1DT) GB/T 23901.4 Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables (GB/T 23901.4-2019, ISO 19232-4:2013, IDT) GB/T 25758 (All parts) Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing
Penetrant Testing
Author: M.J. Lovejoy
Publisher: Springer
ISBN: 9780412387005
Category : Technology & Engineering
Languages : en
Pages : 222
Book Description
Publisher: Springer
ISBN: 9780412387005
Category : Technology & Engineering
Languages : en
Pages : 222
Book Description
Why Metals Fail
Author: R. D. Barer
Publisher: CRC Press
ISBN: 9780677026305
Category : Science
Languages : en
Pages : 366
Book Description
Publisher: CRC Press
ISBN: 9780677026305
Category : Science
Languages : en
Pages : 366
Book Description
Handbook of Nondestructive Evaluation
Author: Chuck Hellier
Publisher: McGraw Hill Professional
ISBN: 007139947X
Category : Technology & Engineering
Languages : en
Pages : 594
Book Description
Perform Accurate, Cost-Effective Product Testing Nondestructive testing has become the leading product testing standard, and Handbook of Non-Destructive Evaluations by Chuck Hellier is the unparalleled one-stop, A-to-Z guide to this subject. Covering the background, benefits, limitations, and applications of each, this decision-simplifying resource looks at both the major and emerging nondestructive evaluation methods, including: visual testing...penetrant testing...magnetic particle testing...radiographic testing...Ultrasonic testing... eddy current testing...thermal infrared testing...and acoustic emission testing. In clear, understandable terms, the Handbook shows you how to interpret results and formulate the right decisions based on them, making it a welcome resource for engineers, metallurgists, quality control specialists, and anyone else involved in product design, manufacture, or maintenance. The Handbook is also the ideal prep tool if you’re seeking certification in AWS/CSWIP, ASNT Level III, ACCP, and IRRSP programs. If you’re looking for a one-stop answer to all your nondestructive testing questions, your search ends here.
Publisher: McGraw Hill Professional
ISBN: 007139947X
Category : Technology & Engineering
Languages : en
Pages : 594
Book Description
Perform Accurate, Cost-Effective Product Testing Nondestructive testing has become the leading product testing standard, and Handbook of Non-Destructive Evaluations by Chuck Hellier is the unparalleled one-stop, A-to-Z guide to this subject. Covering the background, benefits, limitations, and applications of each, this decision-simplifying resource looks at both the major and emerging nondestructive evaluation methods, including: visual testing...penetrant testing...magnetic particle testing...radiographic testing...Ultrasonic testing... eddy current testing...thermal infrared testing...and acoustic emission testing. In clear, understandable terms, the Handbook shows you how to interpret results and formulate the right decisions based on them, making it a welcome resource for engineers, metallurgists, quality control specialists, and anyone else involved in product design, manufacture, or maintenance. The Handbook is also the ideal prep tool if you’re seeking certification in AWS/CSWIP, ASNT Level III, ACCP, and IRRSP programs. If you’re looking for a one-stop answer to all your nondestructive testing questions, your search ends here.
Magnetic Particle Inspection
Author: M.J. Lovejoy
Publisher: Springer Science & Business Media
ISBN: 9401115362
Category : Technology & Engineering
Languages : en
Pages : 459
Book Description
During the years since this book was first published in 1993 there have very few developments in the technology of magnetic particle inspection apart from improvements in instrumentation which has made the measurement of peak values of time varying currents practicable. The major changes have arisen from health and safety and environmental concerns. These involve chemicals and exposure of personnel to air-borne electromagnetic fields and long wave ultraviolet (UY.A). The changes in the acceptability of certain volatile halogenated hydrocar bons which led to the banning of 1, 1, 1 thichloroethane in 1995 were evident in 1993. The present discussions concerning the emissions of volatile organic compounds (VOCs) in general was also current and has now reached a stage where the effects of these deliberations will become evident over the next few years. Concerns over the exposure of personnel to airborne electromagnetic fields has been current for some years as has discussions to the effects of long wave ultraviolet (UY.A) on human skin. Recommendations as to maximum permit ted exposures over periods of time to both of these phenomena have been put forward and will doubtless form the basis of future legislation on the matter. A number of new specifications have appeared notably EN (European) and ISO specifications and some of these are still in preparation. Generally their impact will be minimal since these specifications are largely derived from existing documentation.
Publisher: Springer Science & Business Media
ISBN: 9401115362
Category : Technology & Engineering
Languages : en
Pages : 459
Book Description
During the years since this book was first published in 1993 there have very few developments in the technology of magnetic particle inspection apart from improvements in instrumentation which has made the measurement of peak values of time varying currents practicable. The major changes have arisen from health and safety and environmental concerns. These involve chemicals and exposure of personnel to air-borne electromagnetic fields and long wave ultraviolet (UY.A). The changes in the acceptability of certain volatile halogenated hydrocar bons which led to the banning of 1, 1, 1 thichloroethane in 1995 were evident in 1993. The present discussions concerning the emissions of volatile organic compounds (VOCs) in general was also current and has now reached a stage where the effects of these deliberations will become evident over the next few years. Concerns over the exposure of personnel to airborne electromagnetic fields has been current for some years as has discussions to the effects of long wave ultraviolet (UY.A) on human skin. Recommendations as to maximum permit ted exposures over periods of time to both of these phenomena have been put forward and will doubtless form the basis of future legislation on the matter. A number of new specifications have appeared notably EN (European) and ISO specifications and some of these are still in preparation. Generally their impact will be minimal since these specifications are largely derived from existing documentation.
Ultrasonic Testing of Materials
Author: Josef Krautkrämer
Publisher: Springer Science & Business Media
ISBN: 3662023571
Category : Technology & Engineering
Languages : en
Pages : 678
Book Description
The amendments of this third English edition with respect to the second one concern beside some printing errors the replacement of some pictures in part D by more modern ones and updating the list of stand ards to the state of the fourth German edition. J OSEF KRAUTKRÄMER Cologne, January 1983 Preface to the Second Edition This seeond English edition is based on the third German edition. In view of most recent teehnologieal advanees it has beeome neeessary in many instanees to supplement the seeond German edition and to revise some parts completely. In addition to piezo-eleetric methods, others are now also extensively diseussed in Chapter 8. As for the intensity method, ultrasonie holo graphy is treated in the new Seetion 9. 4. In Part B, for reasons of syste maties, the resonanee method has been ineluded under transit-time methods. It appeared neeessary to elaborate in greater detail the defini tion of the properties of pulse-echo testing equipment and their measure ments (10. 4). The more recent findings of pulse speetroscopy (5. 6) and sound-emission analysis (12) are mentioned only in passing because their significanee is still controversial. Apart from numerous additions, partieularly those coneerning automatie testing installations, Part C also eontains a new chapter whieh deals with tests on nu eIe ar reactors (28), as weIl as abrief diseussion of surfaee-hardness tests (32. 4). It beeame impossible to include a critieal analysis of the principal standards in Chapter 33.
Publisher: Springer Science & Business Media
ISBN: 3662023571
Category : Technology & Engineering
Languages : en
Pages : 678
Book Description
The amendments of this third English edition with respect to the second one concern beside some printing errors the replacement of some pictures in part D by more modern ones and updating the list of stand ards to the state of the fourth German edition. J OSEF KRAUTKRÄMER Cologne, January 1983 Preface to the Second Edition This seeond English edition is based on the third German edition. In view of most recent teehnologieal advanees it has beeome neeessary in many instanees to supplement the seeond German edition and to revise some parts completely. In addition to piezo-eleetric methods, others are now also extensively diseussed in Chapter 8. As for the intensity method, ultrasonie holo graphy is treated in the new Seetion 9. 4. In Part B, for reasons of syste maties, the resonanee method has been ineluded under transit-time methods. It appeared neeessary to elaborate in greater detail the defini tion of the properties of pulse-echo testing equipment and their measure ments (10. 4). The more recent findings of pulse speetroscopy (5. 6) and sound-emission analysis (12) are mentioned only in passing because their significanee is still controversial. Apart from numerous additions, partieularly those coneerning automatie testing installations, Part C also eontains a new chapter whieh deals with tests on nu eIe ar reactors (28), as weIl as abrief diseussion of surfaee-hardness tests (32. 4). It beeame impossible to include a critieal analysis of the principal standards in Chapter 33.
Materials and Processes for NDT Technology
Author: Harry D. Moore
Publisher: Amer Society for Nondestructive
ISBN: 9780931403064
Category : Technology & Engineering
Languages : en
Pages : 204
Book Description
Publisher: Amer Society for Nondestructive
ISBN: 9780931403064
Category : Technology & Engineering
Languages : en
Pages : 204
Book Description
Ultrasonics
Author: Dale Ensminger
Publisher: CRC Press
ISBN: 0824758897
Category : Science
Languages : en
Pages : 768
Book Description
Recent advances in power electronics greatly benefit the multidisciplinary field of modern ultrasonics. More powerful, compact, and versatile electronic chips and software enable new computer-based devices for real-time data capture, storage, analysis, and display and advance the science and technology employed in commercial systems and applications of ultrasound. Reviewing the scientific basis behind these improvements, Ultrasonics: Fundamentals, Technologies, and Applications, Third Edition discusses them in detail, with new and additional figures and references, offering a completely revised and expanded examination of the state of modern ultrasonics. This new edition of a bestselling industry reference discusses the full breadth of ultrasonics applications for industrial and medical use and provides the fundamentals and insights gathered over the authors’ collective 80 years in the field. It provides a unique and comprehensive treatment of the science and technology behind the latest advancements and applications in both low and high power implementations. Coverage combines fundamental physics, a review and analysis of sensors and transducers, and the systems required for the full spectrum of industrial, nondestructive testing and medical and biomedical uses. It includes citations of numerous references and covers both main stream and the more unusual and obscure applications of ultrasound. Ultrasonics is ubiquitous in its industrial applications for sensing, NDT, and process measurements, in high power forms for processing and sonochemistry, as well as in medical procedures where it is used for diagnosis, therapy and surgery. This book provides a complete overview of the field, presenting numerous applications, cutting-edge advancements and improvements, additional figures and references, and a look at future directions.
Publisher: CRC Press
ISBN: 0824758897
Category : Science
Languages : en
Pages : 768
Book Description
Recent advances in power electronics greatly benefit the multidisciplinary field of modern ultrasonics. More powerful, compact, and versatile electronic chips and software enable new computer-based devices for real-time data capture, storage, analysis, and display and advance the science and technology employed in commercial systems and applications of ultrasound. Reviewing the scientific basis behind these improvements, Ultrasonics: Fundamentals, Technologies, and Applications, Third Edition discusses them in detail, with new and additional figures and references, offering a completely revised and expanded examination of the state of modern ultrasonics. This new edition of a bestselling industry reference discusses the full breadth of ultrasonics applications for industrial and medical use and provides the fundamentals and insights gathered over the authors’ collective 80 years in the field. It provides a unique and comprehensive treatment of the science and technology behind the latest advancements and applications in both low and high power implementations. Coverage combines fundamental physics, a review and analysis of sensors and transducers, and the systems required for the full spectrum of industrial, nondestructive testing and medical and biomedical uses. It includes citations of numerous references and covers both main stream and the more unusual and obscure applications of ultrasound. Ultrasonics is ubiquitous in its industrial applications for sensing, NDT, and process measurements, in high power forms for processing and sonochemistry, as well as in medical procedures where it is used for diagnosis, therapy and surgery. This book provides a complete overview of the field, presenting numerous applications, cutting-edge advancements and improvements, additional figures and references, and a look at future directions.
Non-destructive Testing - Qualification and Certification of Personnel
Author: Standards Australia International
Publisher:
ISBN: 9780733773181
Category : Nondestructive testing
Languages : en
Pages : 25
Book Description
Publisher:
ISBN: 9780733773181
Category : Nondestructive testing
Languages : en
Pages : 25
Book Description
Metallurgy for the Non-Metallurgist, Second Edition
Author: Arthur C. Reardon
Publisher: ASM International
ISBN: 1615038450
Category : Metallurgy
Languages : en
Pages : 527
Book Description
The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.
Publisher: ASM International
ISBN: 1615038450
Category : Metallurgy
Languages : en
Pages : 527
Book Description
The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.