National Program for Inspection of Non-Federal Dams. Batterson Park Pond Dam (CT 00262), Connecticut River Basin, Farmington/New Britain, Connecticut. Phase I Inspection Report PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download National Program for Inspection of Non-Federal Dams. Batterson Park Pond Dam (CT 00262), Connecticut River Basin, Farmington/New Britain, Connecticut. Phase I Inspection Report PDF full book. Access full book title National Program for Inspection of Non-Federal Dams. Batterson Park Pond Dam (CT 00262), Connecticut River Basin, Farmington/New Britain, Connecticut. Phase I Inspection Report by CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.. Download full books in PDF and EPUB format.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 64
Get Book Here
Book Description
The Batterson Park Pond Dam is an earthfill embankment with stone masonry core that is 1,300 feet long and 30 feet high with a 35 foot wide spillway. It has two, 20 inch blowoffs as well as a line to an adjacent fire hydrant. The dam is classified as intermediate in size and has a high hazard potential based on downstream habitation. based on visual inspection, hydraulic computations and past operational performance, the dam is judged to be in poor condition. Areas of the dam should be studied in order to monitor its behavior such as the central downstream slope which is swampy and shows considerable seepage and the deteriorated spillway channel. The drainage area contributing to the dam is 4.68 square miles. The routed test flood peak outflow (Probable Maximum Flood) is 5,295 cfs which will overtop the dam by 1.21 feet. The project will pass only 29 percent of this peak outflow before overtopping the dam.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 64
Get Book Here
Book Description
The Batterson Park Pond Dam is an earthfill embankment with stone masonry core that is 1,300 feet long and 30 feet high with a 35 foot wide spillway. It has two, 20 inch blowoffs as well as a line to an adjacent fire hydrant. The dam is classified as intermediate in size and has a high hazard potential based on downstream habitation. based on visual inspection, hydraulic computations and past operational performance, the dam is judged to be in poor condition. Areas of the dam should be studied in order to monitor its behavior such as the central downstream slope which is swampy and shows considerable seepage and the deteriorated spillway channel. The drainage area contributing to the dam is 4.68 square miles. The routed test flood peak outflow (Probable Maximum Flood) is 5,295 cfs which will overtop the dam by 1.21 feet. The project will pass only 29 percent of this peak outflow before overtopping the dam.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 101
Get Book Here
Book Description
The Middle Pond Dam consists of an earth embankment and stone masonry structure with a maximum height of 10 feet a top width of 10 feet and a total length of 535 feet including overflow spillways of 21 feet and 29 feet located near the left end of the dam. A low earthen dike with a maximum height of about 3 feet, a top width of about 5 feet and a length of about 200 feet is located about 150 feet to the left of the dam. Based on the visual inspection, the dam is judged to be in very poor condition. Features that could affect the future integrity of the dam are continued erosion of the upstream slope and crest, trees and stumps on the slopes, seepage through the dam, decreased spillway capacity due to blocking off the right spillway, deterioration of the right spillway, and lack of an operable outlet works. With the right spillway blocked the total spillway capacity of 430 cfs is equal to 17 percent of the Test Flood outflow. With the right spillway restored, the total spillway capacity of 550 cfs would be equal to 22 percent of the Test Flood outflow.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 67
Get Book Here
Book Description
The Burr Pond Dam consists of a stone masonry wall with an upstream earth embankment. The dam has a maximum height of 17 feet and an overall length of 170 feet, including a 44.7-foot-long overflow spillway located near the center of the dam and auxiliary spillways located on each side of the amin spillway with a total length of 50.5 feet. The outlet works consist of a 6-inch cast iron high level outlet and an 18-inch corrugated metal low level outlet or blowoff controlled by manually operated gates in a gate chamber at the left end of the main spillway. The dam impounds Burr Pond, a portion of Burr Pond State Park and is used for swimming, fishing and boating. Based on the visual inspection, the dam is judged to be in fair condition. Features that can affect the integrity of the dam are the seepage through the left side of the dam, erosion of the upstream slope of the dam, possible development of internal erosion along the root systems of trees near the downstream toe of the dam, and the poor condition of the low level outlet or blowoff pipe. The Test Flood inflow is 1,425 cfs and the routed outflow of 720 cfs results in a freeboard from water surface to the top of the dam of 1.2 feet. The spillway capacity with the water level at the top of the dam is 1,415 cfs and is equal to 197 percent of the routed Test Flood outflow.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 102
Get Book Here
Book Description
The dam consists of a 400 foot long concrete spillway across the Farmington River with an adjacent hydroelectric generating powerhouse, and a 100 foot long butressed concrete transition dam spanning from the 70 foot long powerhouse to a 1050 foot long earth dike running along the pond shoreline. There are two low level sluices through the spillway section which are operated by hydraulic lifts in a chamber above the sluices. The sluices have an inlet elevation approximately 44.5 feet below the crest of the spillway. The 4 inlets to the turbines are approximately 34.5 feet below the crest of the spillway; the discharge flows to a tailrace channel cut into bedrock to the left of the spillway discharge channel. A fish ladder with an inlet about 1.5 feet below the spillway crest also discharges into the tailrace channel. All inlet gates are well maintained and operable. Based upon the visual inspection and past performance, the dam is judged to be in fair condition. No evidence of instability was observed in the dam or its appurtenances. The condition of the earth dike is good, however there are areas requiring attention. Based upon our hydraulics computations, the spillway capacity is 101,000 (cfs), which is equivalent to 51% of the routed Test Flood outflow.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 113
Get Book Here
Book Description
Park Pond Dam, located at the eastern end of the pond, consists of an earth embankment with a maximum height of 20 feet and a top width which varies from 8 feet to 15 feet. The dam is 420 feet long and has a 19.9 foot concrete spillway at the left end. A diversion channel from an adjacent watershed connects to the spillway approach channel. The impoundment has a maximum storage capacity of 1,100 Acre-Feet. The dike, located at the northwestern end of the pond, consists of an earth embankment with a paved roadway along the crest. The dike has a maximum height of 7 feet, a top width of 21 feet, and a length of about 80 feet. Based on the visual inspection, the dam is judged to be in poor condition and the dike in fair condition. Features which could affect the future integrity of the dam are trees and brush on the embankment; seepage through the embankment; erosion of the downstream slope; deterioration of the spillway approach channel wall and the spillway weir; the accumulation of debris in the spillway and approach and discharge channels; the location of the low level control valve downstream of the dam and lack of erosion protection on the dike. The spillway capacity with water level at the top of the dam and the dike is 310 cfs or 58 percent of the Test Flood routed outflow. The Test Flood would overtop the dam and dike by 0.3 feet.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 82
Get Book Here
Book Description
The Farmington Reservoir Dam is an earth embankment impounding an unnamed tributary to the Pequabuck River and is reported to have been built in 1895. The dam (including spillway) is 760 feet long and eight (8) feet wide at the top. The dam has a maximum impoundment capacity of 64 acre-feet and is about 8 feet in height from the toe of the downstream slope to the top of the dam. The spillway is a 32 foot long, and 2.8 foot high, concrete, ogee shaped weir. There is no information available on outlet pipes. Based upon the visual inspection at the site and past performance, the dam is judged to be in poor condition. There are areas requiring attention, monitoring, and maintenance such as seeps along the toe of the embankment, erosion on the upstream and downstream slopes, location and operation of outlet and inlet structures and valves, and removal of trees. Peak inflow to the impoundment at the test flood is 315 cfs; peak outflow is 250 cfs with the maximum stage in the reservoir at 383.7, or 1.0 foot below the top of the dam. Based on this information the dam is not expected to overtop at the test flood condition. The spillway capacity with the pool at top of dam is estimated to be 525 cfs which is greater than 100% of the routed test flood outflow.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 67
Get Book Here
Book Description
Parks Pond Dam is a cyclopean masonry/earth embankment that is approximately 180 feet long and 12 feet high. The earth embankment is on the downstream side and has a 2:1 slope. The upstream face is cyclopean masonry with a vertical face. The spillway is located on the southern half of the dam and consists of a 30.5 foot long weir. There is a lower gate house for the control of a discharge pipe that passes through the base of the dam. The size of the pipe is unknown. The valve for the operation of the discharge pipe is inoperable. The drainage area is 0.5 square miles and the reservoir has 100 acre-feet of available storage. The assessment of the dam is based on the visual inspection, past operational performance and hydraulic/hydrologic computations. The dam is judged to be in poor condition with several areas that require attention. These areas include seepage through the dam and around the spillway's west training wall, deteriorated concrete of the spillway and upstream face of the dam, vegetation on the embankments and along the toe of the dam and the nonoperating status of the blowoff. The dam is classified as small and has a significant hazard potential in accordance with guidelines established by the Corps of Engineers. The test flood for this dam is 1/2 the Probable Maximum Flood (PMF). The test flood inflow is 625 cfs and the routed test flood outflow is 473 cfs. The test flood outflow will overtop the dam by 0.55 feet.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 91
Get Book Here
Book Description
This dam consists of an earth embankment, and a concrete wall which extends from the embankments to the spillway on each end of the spillway. The earth embankment is 500 feet long, 8 feet wide at the top and 6.7 feet high, with a downstream slope of 2H:1V. The concrete spillway is located at the western end of the dam and is 40 feet long with 15 inch high permanently attached timber flashboards. Based on the visual inspection, and past operational performance, the dam is judged to be in POOR condition. There are large trees growing on the embankment. The concrete wall is severely cracked and spalled and has been exposed on the downstream side by erosion. Seepage is occurring through the wall and all along the downstream toe of the embankment. The test flood for this dam is the 100 year flood. The test flood has an inflow equal to 1810 cfs and an outflow discharge equal to 1800 cfs at a stillwater elevation of 233.1 which will overtop the dam by 1.0 foot. The maximum outflow capacity of the spillway with the water level at the top of the dam is 53 cfs, which is 3 percent of the test flood outflow.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 69
Get Book Here
Book Description
Rogers Pond Dam is a 231 foot long earth and vertical stone masonry dam with a maximum height of 9 feet. There is a 50 foot long concrete spillway near the center of the dam. The width of the dam varies from a minimum of 6 feet at the right spillway edge to 21 feet at the left abutment. The purpose of this dam is primarily recreational. The visual inspection of Rogers Pond Dam indicated that the dam is in fair condition. The inspection revealed that portions of the upstream masonry wall have been displaced at several locations. Numerous trees are growing on the left upstream embankment. Seepage was noted along the stone wall on both sides of the spillway and the ground was wet and soggy 25 feet downstream of the left side of the dam, and a large depression was observed just downstream of the wall along the right side of the dam. The storage at top of dam is 60 acre-feet. The spillway will discharge 500 cfs or 42% of the test flood with the pool level at the top of the dam. The peak test flood inflow is 1195 cfs, with a peak test flood outflow of 1140 cfs, which will overtop the dam by 0.6 feet.
Author: CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV.
Publisher:
ISBN:
Category :
Languages : en
Pages : 34
Get Book Here
Book Description
Moulsons Pond Dam is a stone masonry dam approximately 80 feet long and 23 feet high. The spillway is L shaped with a concrete cap that extends almost the total length of the dam. A bridge spans over the river immediately downstream of the spillway. The top of road is the dam crest and the west bridge abutment is the west spillway abutment. There is a 2-foot high concrete abutment at the east end that is 8 feet below the top of the dam. At the west end of the dam there is a 6-foot diameter pipe that passes beneath the roadway into a sluiceway that goes to an old mill. There is no control for this sluiceway which is always open and the water discharges into the downstream channel. There is no low-level discharge pipe.
