Multi-objective Optimization of Plug-in HEV Powertrain Using Modified Particle Swarm Optimization PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Multi-objective Optimization of Plug-in HEV Powertrain Using Modified Particle Swarm Optimization PDF full book. Access full book title Multi-objective Optimization of Plug-in HEV Powertrain Using Modified Particle Swarm Optimization by Omkar Parkar. Download full books in PDF and EPUB format.
Author: Omkar Parkar
Publisher:
ISBN:
Category :
Languages : en
Pages : 204
Get Book Here
Book Description
An increase in the awareness of environmental conservation is leading the automotive industry into the adaptation of alternatively fueled vehicles. Electric, Fuel-Cell as well as Hybrid-Electric vehicles focus on this research area with the aim to efficiently utilize vehicle powertrain as the first step. Energy and Power Management System control strategies play a vital role in improving the efficiency of any hybrid propulsion system. However, these control strategies are sensitive to the dynamics of the powertrain components used in the given system. A kinematic mathematical model for Plug-in Hybrid Electric Vehicle (PHEV) has been developed in this study and is further optimized by determining optimal power management strategy for minimal fuel consumption as well as NOx emissions while executing a set drive cycle. A multi-objective optimization using weighted sum formulation is needed in order to observe the trade-off between the optimized objectives. Particle Swarm Optimization (PSO) algorithm has been used in this research, to determine the trade-off curve between fuel and NOx. In performing these optimizations, the control signal consisting of engine speed and reference battery SOC trajectory for a 2-hour cycle is used as the controllable decision parameter input directly from the optimizer. Each element of the control signal was split into 50 distinct points representing the full 2 hours, giving slightly less than 2.5 minutes per point, noting that the values used in the model are interpolated between the points for each time step. With the control signal consisting of 2 distinct signals, speed, and SOC trajectory, as 50 element time-variant signals, a multidimensional problem was formulated for the optimizer. Novel approaches to balance the optimizer exploration and convergence, as well as seeding techniques are suggested to solve the optimal control problem. The optimization of each involved individual runs at 5 different weight levels with the resulting cost populations being compiled together to visually represent with the help of Pareto front development. The obtained results of simulations and optimization are presented involving performances of individual components of the PHEV powertrain as well as the optimized PMS strategy to follow for a given drive cycle. Observations of the trade-off are discussed in the case of Multi-Objective Optimizations.
Author: Omkar Parkar
Publisher:
ISBN:
Category :
Languages : en
Pages : 204
Get Book Here
Book Description
An increase in the awareness of environmental conservation is leading the automotive industry into the adaptation of alternatively fueled vehicles. Electric, Fuel-Cell as well as Hybrid-Electric vehicles focus on this research area with the aim to efficiently utilize vehicle powertrain as the first step. Energy and Power Management System control strategies play a vital role in improving the efficiency of any hybrid propulsion system. However, these control strategies are sensitive to the dynamics of the powertrain components used in the given system. A kinematic mathematical model for Plug-in Hybrid Electric Vehicle (PHEV) has been developed in this study and is further optimized by determining optimal power management strategy for minimal fuel consumption as well as NOx emissions while executing a set drive cycle. A multi-objective optimization using weighted sum formulation is needed in order to observe the trade-off between the optimized objectives. Particle Swarm Optimization (PSO) algorithm has been used in this research, to determine the trade-off curve between fuel and NOx. In performing these optimizations, the control signal consisting of engine speed and reference battery SOC trajectory for a 2-hour cycle is used as the controllable decision parameter input directly from the optimizer. Each element of the control signal was split into 50 distinct points representing the full 2 hours, giving slightly less than 2.5 minutes per point, noting that the values used in the model are interpolated between the points for each time step. With the control signal consisting of 2 distinct signals, speed, and SOC trajectory, as 50 element time-variant signals, a multidimensional problem was formulated for the optimizer. Novel approaches to balance the optimizer exploration and convergence, as well as seeding techniques are suggested to solve the optimal control problem. The optimization of each involved individual runs at 5 different weight levels with the resulting cost populations being compiled together to visually represent with the help of Pareto front development. The obtained results of simulations and optimization are presented involving performances of individual components of the PHEV powertrain as well as the optimized PMS strategy to follow for a given drive cycle. Observations of the trade-off are discussed in the case of Multi-Objective Optimizations.
Author: Qing Wang
Publisher:
ISBN:
Category :
Languages : en
Pages : 346
Get Book Here
Book Description
Author: S. Ehtesham Al Hanif
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Plug-in Hybrid Electric vehicle (PHEV) technology has the potential to reduce operational costs, greenhouse gas (GHG) emissions, and gasoline consumption in the transportation market. However, the net benefits of using a PHEV depend critically on several aspects, such as individual travel patterns, vehicle powertrain design and battery technology. To examine these effects, a multi-objective optimization model was developed integrating vehicle physics simulations through a Matlab/Simulink model, battery durability, and Canadian driving survey data. Moreover, all the drivetrains are controlled implicitly by the ADVISOR powertrain simulation and analysis tool. The simulated model identifies Pareto optimal vehicle powertrain configurations using a multi-objective Pareto front pursuing genetic algorithm by varying combinations of powertrain components and allocation of vehicles to consumers for the least operational cost, and powertrain cost under various driving assumptions.
Author: Sachin Kumar Porandla
Publisher:
ISBN:
Category : Algorithms
Languages : en
Pages :
Get Book Here
Book Description
A Hybrid Electric Vehicle (HEV) is a complex electro-mechanical-chemical system that involves two or more energy sources. The inherent advantages of HEVs are their increased fuel economy, reduced harmful emissions and better vehicle performance. The extent of improvement in fuel economy and vehicle performance greatly depends on selecting optimal component sizes. The complex interaction between the various components makes it difficult to size specific components manually or analytically. So, simulation-based multi-variable design optimization is a possible solution for such kind of system level design problems. The multi-modal, noisy and discontinuous nature of the Hybrid Vehicle design requires the use of derivative-free global algorithms because the derivative-based local algorithms work poorly with such design problems. In this thesis, a Hybrid Vehicle is optimized using various Global Algorithms -- DIviding RECTangles (DIRECT), Simulated Annealing (SA), Genetic Algorithm (GA), and Particle Swarm Optimization (PSO). The objective of this study is to increase the overall fuel economy on a composite of city and highway driving cycle and to improve the vehicle performance. The performance of each algorithm is compared on a six variable hybrid electric vehicle design problem. Powertrain System Analysis Tool (PSAT), a state-of-the-art powertrain simulator, developed in MATLAB/Simulink environment by Argonne National Laboratory is used as the vehicle simulator. Further, a Hybrid algorithm that is a combination of global and local algorithm is developed to improve the convergence of the global algorithms. The hybrid algorithm is tested on two simple mathematical functions to check its efficiency.
Author: Yue Cao
Publisher: Springer Nature
ISBN: 9811957517
Category : Technology & Engineering
Languages : en
Pages : 286
Get Book Here
Book Description
This book focuses on the design, informatics, and energy sustainability of automated and electric vehicles. Both principles and engineering practice have been addressed, from design perspectives toward informatics enabled transport service operation including automated valet parking and charging use cases. This is achieved by providing an in-depth study on a number of major topics such as battery management, eco-driving system, telecommunications, transport and charging services, cyber-security, etc. The book benefits researchers, engineers, and graduate students in the fields of the intelligent transport system, telecommunication, cyber-security, and smart grids.
Author: Emrah Tolga Yildiz
Publisher:
ISBN:
Category : Automobiles
Languages : en
Pages : 132
Get Book Here
Book Description
Today transportation is one of the rapidly evolving technologies in the world. With the stringent mandatory emission regulations and high fuel prices, researchers and manufacturers are ever increasingly pushed to the frontiers of research in pursuit of alternative propulsion systems. Electrically propelled vehicles are one of the most promising solutions among all the other alternatives, as far as; reliability, availability, feasibility and safety issues are concerned. However, the shortcomings of a fully electric vehicle in fulfilling all performance requirements make the electrification of the conventional engine powered vehicles in the form of a plug-in hybrid electric vehicle (PHEV) the most feasible propulsion systems. The optimal combination of the properly sized components such as internal combustion engine, electric motor, energy storage unit are crucial for the vehicle to meet the performance requirements, improve fuel efficiency, reduce emissions, and cost effectiveness. In this thesis an application of Particle Swarm Optimization (PSO) approach to optimally size the vehicle powertrain components (e.g. engine power, electric motor power, and battery energy capacity) while meeting all the critical performance requirements, such as acceleration, grade and maximum speed is studied. Compared to conventional optimization methods, PSO handles the nonlinear constrained optimization problems more efficiently and precisely. The PHEV powertrain configuration with the determined sizes of the components has been used in a new vehicle model in PSAT (Powertrain System Analysis Toolkit) platform. The simulation results show that with the optimized component sizes of the PHEV vehicle (via PSO), the performance and the fuel efficiency of the vehicle are significantly improved. The optimal solution of the component sizes found in this research increased the performance and the fuel efficiency of the vehicle. Furthermore, after reaching the desired values of the component sizes that meet all the performance requirements, the overall emission of hazardous pollutants from the PHEV powertrain is included in the optimization problem in order to obtain updated PHEV component sizes that would also meet additional design specifications and requirements.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
A Hybrid Electric Vehicle (HEV) is a complex electro-mechanical-chemical system that involves two or more energy sources. The inherent advantages of HEVs are their increased fuel economy, reduced harmful emissions and better vehicle performance. The extent of improvement in fuel economy and vehicle performance greatly depends on selecting optimal component sizes. The complex interaction between the various components makes it difficult to size specific components manually or analytically. So, simulation-based multi-variable design optimization is a possible solution for such kind of system level design problems. The multi-modal, noisy and discontinuous nature of the Hybrid Vehicle design requires the use of derivative-free global algorithms because the derivative-based local algorithms work poorly with such design problems. In this thesis, a Hybrid Vehicle is optimized using various Global Algorithms? DIviding RECTangles (DIRECT), Simulated Annealing (SA), Genetic Algorithm (GA), and Particle Swarm Optimization (PSO). The objective of this study is to increase the overall fuel economy on a composite of city and highway driving cycle and to improve the vehicle performance. The performance of each algorithm is compared on a six variable hybrid electric vehicle design problem. Powertrain System Analysis Tool (PSAT), a state-of-the-art powertrain simulator, developed in MATLAB/Simulink environment by Argonne National Laboratory is used as the vehicle simulator. Further, a Hybrid algorithm that is a combination of global and local algorithm is developed to improve the convergence of the global algorithms. The hybrid algorithm is tested on two simple mathematical functions to check its efficiency.
Author: Shashi Kamal Shahi
Publisher:
ISBN:
Category : Hybrid electric vehicles
Languages : en
Pages : 294
Get Book Here
Book Description
Plug-in hybrid electric vehicles (PHEV), which share the characteristics of both a conventional HEV and an all-electric vehicle, rely on large storage batteries. Therefore, the characteristics and hybridization of the PHEV battery with the engine and electric motor play an important role in the design and potential adoption of PHEVs. In this research work, a multi-objective optimization approach is applied to compare the operational performance of Toyota Prius PHEV20 (PHEV for 20 miles of all electric range) based on fuel economy, operating cost, and green house gas emissions for 4480 combinations (20 batteries, 14 motors, and 16 engines). Powertrain System Analysis Toolkit software package automated with the Pareto Set Pursuing multi-objective optimization method is used for this purpose on two different drive cycles. It was found that 1) battery, motor, and engine work collectively in defining an optimal hybridization scheme; and 2) the optimal hybridization scheme varies with drive cycles.
Author: Jesús Manuel González Pérez
Publisher: MDPI
ISBN: 3038971901
Category : Technology & Engineering
Languages : en
Pages : 373
Get Book Here
Book Description
This book is a printed edition of the Special Issue "Emerging Technologies for Electric and Hybrid Vehicles" that was published in energies
Author: Thibaut Reuschlé
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
