Modular HTGR Safety Basis and Approach

Modular HTGR Safety Basis and Approach PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
The Next Generation Nuclear Plant (NGNP) will be a licensed commercial high temperature gas-cooled reactor (HTGR) capable of producing electricity and/or high temperature process heat for industrial markets supporting a range of end-user applications. The NGNP Project has adopted the 10 CFR 52 Combined License (COL) process, as recommended in the NGNP Licensing Strategy - A Report to Congress, dated August 2008, as the foundation for the NGNP licensing strategy [DOE/NRC 2008]. Nuclear Regulatory Commission (NRC) licensing of the NGNP plant utilizing this process will demonstrate the efficacy for licensing future HTGRs for commercial industrial applications. This information paper is one in a series of submittals that address key generic issues of the priority licensing topics as part of the process for establishing HTGR regulatory requirements. This information paper provides a summary level introduction to HTGR history, public safety objectives, inherent and passive safety features, radionuclide release barriers, functional safety approach, and risk-informed safety approach. The information in this paper is intended to further the understanding of the modular HTGR safety approach with the NRC staff and public stakeholders. The NGNP project does not expect to receive comments on this information paper because other white papers are addressing key generic issues of the priority licensing topics in greater detail.

Modular High Temperature Gas-Cooled Reactor Safety Basis and Approach

Modular High Temperature Gas-Cooled Reactor Safety Basis and Approach PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
Various international efforts are underway to assess the safety of advanced nuclear reactor designs. For example, the International Atomic Energy Agency has recently held its first Consultancy Meeting on a new cooperative research program on high temperature gas-cooled reactor (HTGR) safety. Furthermore, the Generation IV International Forum Reactor Safety Working Group has recently developed a methodology, called the Integrated Safety Assessment Methodology, for use in Generation IV advanced reactor technology development, design, and design review. A risk and safety assessment white paper is under development with respect to the Very High Temperature Reactor to pilot the Integrated Safety Assessment Methodology and to demonstrate its validity and feasibility. To support such efforts, this information paper on the modular HTGR safety basis and approach has been prepared. The paper provides a summary level introduction to HTGR history, public safety objectives, inherent and passive safety features, radionuclide release barriers, functional safety approach, and risk-informed safety approach. The information in this paper is intended to further the understanding of the modular HTGR safety approach. The paper gives those involved in the assessment of advanced reactor designs an opportunity to assess an advanced design that has already received extensive review by regulatory authorities and to judge the utility of recently proposed new methods for advanced reactor safety assessment such as the Integrated Safety Assessment Methodology.

Overview of Modular HTGR Safety Characterization and Postulated Accident Behavior Licensing Strategy

Overview of Modular HTGR Safety Characterization and Postulated Accident Behavior Licensing Strategy PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
This report provides an update on modular high-temperature gas-cooled reactor (HTGR) accident analyses and risk assessments. One objective of this report is to improve the characterization of the safety case to better meet current regulatory practice, which is commonly geared to address features of today s light water reactors (LWRs). The approach makes use of surrogates for accident prevention and mitigation to make comparisons with LWRs. The safety related design features of modular HTGRs are described, along with the means for rigorously characterizing accident selection and progression methodologies. Approaches commonly used in the United States and elsewhere are described, along with detailed descriptions and comments on design basis (and beyond) postulated accident sequences.

Advanced Control and Protection System Design Methods for Modular HTGRs

Advanced Control and Protection System Design Methods for Modular HTGRs PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
The project supported the Nuclear Regulatory Commission (NRC) in identifying and evaluating the regulatory implications concerning the control and protection systems proposed for use in the Department of Energy's (DOE) Next-Generation Nuclear Plant (NGNP). The NGNP, using modular high-temperature gas-cooled reactor (HTGR) technology, is to provide commercial industries with electricity and high-temperature process heat for industrial processes such as hydrogen production. Process heat temperatures range from 700 to 950 C, and for the upper range of these operation temperatures, the modular HTGR is sometimes referred to as the Very High Temperature Reactor or VHTR. Initial NGNP designs are for operation in the lower temperature range. The defining safety characteristic of the modular HTGR is that its primary defense against serious accidents is to be achieved through its inherent properties of the fuel and core. Because of its strong negative temperature coefficient of reactivity and the capability of the fuel to withstand high temperatures, fast-acting active safety systems or prompt operator actions should not be required to prevent significant fuel failure and fission product release. The plant is designed such that its inherent features should provide adequate protection despite operational errors or equipment failure. Figure 1 shows an example modular HTGR layout (prismatic core version), where its inlet coolant enters the reactor vessel at the bottom, traversing up the sides to the top plenum, down-flow through an annular core, and exiting from the lower plenum (hot duct). This research provided NRC staff with (a) insights and knowledge about the control and protection systems for the NGNP and VHTR, (b) information on the technologies/approaches under consideration for use in the reactor and process heat applications, (c) guidelines for the design of highly integrated control rooms, (d) consideration for modeling of control and protection system designs for VHTR, and (e) input for developing the bases for possible new regulatory guidance to assist in the review of an NGNP license application. This NRC project also evaluated reactor and process heat application plant simulation models employed in the protection and control system designs for various plant operational modes and accidents, including providing information about the models themselves, and the appropriateness of the application of the models for control and protection system studies. A companion project for the NRC focused on the potential for new instrumentation that would be unique to modular HTGRs, as compared to light-water reactors (LWRs), due to both the higher temperature ranges and the inherent safety features.

Advances in High Temperature Gas Cooled Reactor Fuel Technology

Advances in High Temperature Gas Cooled Reactor Fuel Technology PDF Author: International Atomic Energy Agency
Publisher:
ISBN: 9789201253101
Category : Business & Economics
Languages : en
Pages : 639

Get Book Here

Book Description
This publication reports on the results of a coordinated research project on advances in high temperature gas cooled reactor (HTGR) fuel technology and describes the findings of research activities on coated particle developments. These comprise two specific benchmark exercises with the application of HTGR fuel performance and fission product release codes, which helped compare the quality and validity of the computer models against experimental data. The project participants also examined techniques for fuel characterization and advanced quality assessment/quality control. The key exercise included a round-robin experimental study on the measurements of fuel kernel and particle coating properties of recent Korean, South African and US coated particle productions applying the respective qualification measures of each participating Member State. The summary report documents the results and conclusions achieved by the project and underlines the added value to contemporary knowledge on HTGR fuel.

Regulatory Policy for Advanced Nuclear Reactors

Regulatory Policy for Advanced Nuclear Reactors PDF Author: United States. Congress. House. Committee on Science and Technology. Subcommittee on Energy Research and Production
Publisher:
ISBN:
Category : Nuclear reactors
Languages : en
Pages : 104

Get Book Here

Book Description


The Technology for an Ultrasafe Reactor

The Technology for an Ultrasafe Reactor PDF Author: United States. Congress. House. Committee on Science and Technology. Subcommittee on Energy Research and Production
Publisher:
ISBN:
Category : Gas cooled reactors
Languages : en
Pages : 216

Get Book Here

Book Description


Modular Systems for Energy and Fuel Recovery and Conversion

Modular Systems for Energy and Fuel Recovery and Conversion PDF Author: Yatish T. Shah
Publisher: CRC Press
ISBN: 1000011739
Category : Technology & Engineering
Languages : en
Pages : 642

Get Book Here

Book Description
Modular Systems for Energy and Fuel Recovery and Conversion surveys the benefits of the modular approach in the front end of the energy industry. The book also outlines strategies for managing modular approaches for fossil, renewable, and nuclear energy resource recovery and conversion with the help of successful industrial examples. The book points out that while the modular approach is most applicable for distributed and small-scale energy systems, it is also often used for parts of large-scale centralized systems. With the help of successful industrial examples of modular approaches for energy and fuel recovery and conversion, the book points out the need for more balance between large-scale centralized systems and small-scale distributed systems to serve the energy needs of rural and isolated communities. Coal, oil, natural gas, hydrogen, biomass, waste, nuclear, geothermal solar, wind, and hydro energy are examined, showing that modular operations are very successfully used in all these components of the energy industry. Aimed at academic researchers and industry professionals, this book provides successful examples and analysis of the modular operation for energy and fuel recovery and conversion. It is also a reference for those who are engaged in the development of modular systems for energy and fuel recovery and conversion.

Thermal and Flow Design of Helium-cooled Reactors

Thermal and Flow Design of Helium-cooled Reactors PDF Author: Gilbert Melese
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 444

Get Book Here

Book Description
This source book provides both an overview of gas-cooled reactors and a detailed look at the high-temperature gas-cooled reactor (HTGR). Taking a worldwide perspective, this book reviews the early development of the HTGR and explores potential future development and applications.

Nuclear Energy for Hydrogen Production

Nuclear Energy for Hydrogen Production PDF Author: Karl Verfondern
Publisher: Forschungszentrum Jülich
ISBN: 3893364684
Category : Hydrogen
Languages : en
Pages : 199

Get Book Here

Book Description