Author: H.E. Hintermann
Publisher: Elsevier
ISBN: 0444596712
Category : Technology & Engineering
Languages : en
Pages : 475
Get Book Here
Book Description
The contributions in this volume represent the work of over ninety international researchers from universities, government laboratories and industry, with diverse backgrounds and interests in a wide range of coatings and surface modifications processes. The seventy-three papers, including seven invited talks and thirty-eight oral communications attest to the fact that surface science and engineering is still a rapidly growing field which attracts experts from the large materials, scientific and technical community.
Author: Rosa M. Miranda
Publisher: Woodhead Publishing
ISBN: 9780081015308
Category : Science
Languages : en
Pages : 210
Get Book Here
Book Description
Surface Modification by Solid State Processing describes friction-based surfacing techniques for surface modification to improve resistance to corrosion and wear, also changing surface chemistry. Surface conditions are increasingly demanding in industrial applications and surface modification can reduce manufacturing and maintenance costs, leading to improved component performance, reliability and lifetime. Friction-based technologies are promising solid state processing technologies, particularly for light alloys, in the manufacturing of composite surface and functionally graded materials This title is divided into five chapters, and after an introduction the book covers friction surfacing; friction stir processing; surface reinforcements of light alloys; and characterization techniques based on eddy currents. Describes friction-based surfacing techniques for surface modification to improve resistance to corrosion and wear, and change surface chemistry Emphasizes industrial applications Describes existing and emerging techniques
Author: Mahmood Aliofkhazraei
Publisher: BoD – Books on Demand
ISBN: 9535111493
Category : Technology & Engineering
Languages : en
Pages : 242
Get Book Here
Book Description
Surface engineering can be defined as an enabling technology used in a wide range of industrial activities. Surface engineering was founded by detecting surface features which destroy most of pieces, e.g. abrasion, corrosion, fatigue, and disruption; then it was recognized, more than ever, that most technological advancements are constrained with surface requirements. In a wide range of industry (such as gas and oil exploitation, mining, and manufacturing), the surfaces generate an important problem in technological advancement. Passing time shows us new interesting methods in surface engineering. These methods usually apply to enhance the surface properties, e.g. wear rate, fatigue, abrasion, and corrosion resistance. This book collects some of new methods in surface engineering.
Author: Cuie Wen
Publisher: Woodhead Publishing
ISBN: 1782423168
Category : Technology & Engineering
Languages : en
Pages : 449
Get Book Here
Book Description
Despite advances in alternative materials, metals are still the biomaterial of choice for a number of clinical applications such as dental, orthopedic and cardiac implants. However, there are a number of intrinsic problems associated with implanting metal in the biological environment, such as wear, corrosion, biocompatibility and toxicity, which must be addressed. Modern technology has enabled scientists to modify metal surfaces or apply special coatings to metals to improve their performance safety. Surface Coating and Modification of Metallic Biomaterials will discuss the most important modification techniques and coatings for metals, first covering the fundamentals of metals as a biomaterial and then exploring surface modification techniques and coatings. - An expansive overview of surface modification techniques for biomedical use - In-depth exploration of issues arising from metal biomaterial use - Includes examples of applications in a clinical setting
Author: C T Kwok
Publisher: Elsevier
ISBN: 0857095838
Category : Technology & Engineering
Languages : en
Pages : 401
Get Book Here
Book Description
Corrosion and erosion processes often occur synergistically to cause serious damage to metal alloys. Laser surface modification techniques such as laser surface melting or alloying are being increasingly used to treat surfaces to prevent corrosion or repair corroded or damaged components. Laser surface modification of alloys for corrosion and erosion resistance reviews the wealth of recent research on these important techniques and their applications.After an introductory overview, part one reviews the use of laser surface melting and other techniques to improve the corrosion resistance of stainless and other steels as well as nickel-titanium and a range of other alloys. Part two covers the use of laser surface modification to prevent different types of erosion, including liquid impingement, slurry (solid particle) and electrical erosion as well as laser remanufacturing of damaged components.With its distinguished editor and international team of contributors, Laser surface modification of alloys for corrosion and erosion resistance is a standard reference for all those concerned with preventing corrosion and erosion damage in metallic components in sectors as diverse as energy production and electrical engineering. - Reviews recent research on the use of laser surface modification techniques, including the prevention of corrosion and repair of corroded or damaged components - Discusses the techniques for improving the corrosion resistance of steels, nickel-titanium and a range of alloys - Analyses the use of laser surface modification to prevent different types of erosion, including liquid impingement and laser remanufacturing of damaged components
Author: R Krutenat
Publisher: Elsevier
ISBN: 0080984851
Category : Science
Languages : en
Pages : 413
Get Book Here
Book Description
Metallurgical coatings 1988 is a compilation of the proceedings of the 15th International Conference on Metallurgical Coatings. This volume is divided into four parts, which deal with synthesis and properties of coatings used in microelectronic applications; methods of characterizing coatings and modified surfaces; protective coatings for magnetic and optical thin film media; and thick and thin film censors. The first part of this volume is further subdivided into five sections focusing on thin film barrier layers, metallization for VLSI circuits, thin films used in packaging technology, new materials and emerging technologies and synthesis and microstructure of high Tc superconductors. The second part is also subdivided into four sections, each presenting different methods, such as the surface and thin film analysis techniques, microstructural characterization techniques, mechanical properties of films and coatings, and non-destructive characterization techniques. Part three discusses the preparation and characterization of reactively sputtered silicon nitride thin films, the bond structures and properties of chemically vapor-deposited amorphous SiC, and the wear of Co-Ni thin film magnetic recording tape against metallic and ceramic surfaces. Finally, this volume explores the insert-mounted thin film sensors for real-time.
Author: George E. Totten
Publisher: CRC Press
ISBN: 0824752686
Category : Technology & Engineering
Languages : en
Pages : 922
Get Book Here
Book Description
Leading readers through an extensive compilation of surface modification reactions and processes for specific tribological results, this reference compiles detailed studies on various residual stresses, reaction processes and mechanisms, heat treatment methods, plasma-based techniques, and more, for a solid understanding of surface structural changes that occur during various engineering procedures. This unique book explores topics previously ignored in other texts on surface engineering and tribology, offers guidelines for the consideration and design of wear life and frictional performance, and sections on laser impingement and nanometer scale surface modification.
Author: Dheerendra Kumar Dwivedi
Publisher: Springer
ISBN: 813223779X
Category : Technology & Engineering
Languages : en
Pages : 234
Get Book Here
Book Description
This book is intended to help engineers analyze service condition and potential mechanisms of surface degradation. This will enable engineers select suitable materials for improved service-life and performance of engineering components. The book comprises 7 chapters, and is well illustrated with schematics, photographs, microstructure, XRD patterns, EDAX mapping, and technical data tables. The book focuses on the influence of materials and methods of surface engineering on structure, properties, and wear-performance of engineering components. It begins with the need to study the subject of surface engineering, scope of surface engineering, and classification of techniques of surface engineering. The book covers conventional material system (steel, cast iron, stellite, WC-Co, PCDs, etc.) and new materials like multilayer structures, functionally gradient materials (FGMs), intermetallic barrier coatings, and thermal barrier coating. The book covers most conventional as well as advanced surface engineering techniques, such as burnishing, shot peening, flame and induction hardening, laser and electron beam hardening, plasma and TIG melting, carburizing, nitriding, cyaniding, boronizing, vanadizing, ion implantation, laser alloying, chemical vapor deposition, PE chemical vapor deposition, physical vapor deposition, weld overlays, laser cladding, hot dip galvanizing, hot dip lead tin coating, hot dip aluminizing, hot dip chromizing, electroplating, electroless plating (Ni-P and Ni-B), mechanical plating, roll bonding, explosive bonding, and hot isostatic. The book also includes an introductory chapter on friction-stir processing of aluminum and titanium alloys. Further, it discusses studies on structure, mechanical and wear properties of weld surfacing, flame spray coating, HVOF sprayed coating, laser cladding of ferrous metals, nickel and cobalt based alloys and their composites in as-sprayed and heat-treated conditions. The book provides a comprehensive overview of various destructive and nondestructive techniques used for characterization of engineered surfaces. The materials in the book will be useful to undergraduate and graduate students. In addition, the contents of this book can also be used for professional development courses for practicing engineers.
Author: P.L.F. Hemment
Publisher: Newnes
ISBN: 0444596313
Category : Technology & Engineering
Languages : en
Pages : 630
Get Book Here
Book Description
Containing the proceedings of three symposia in the E-MRS series this book is divided into two parts. Part one is concerned with ion beam processing, a particularly powerful and versatile technology which can be used both to synthesise and modify materials, including metals, semiconductors, ceramics and dielectrics, with great precision and excellent control. Furthermore it also deals with the correlated effects in atomic and cluster ion bombardment and implantation.Part two deals with the deposition techniques, characterization and applications of advanced ceramic, metallic and polymeric coatings or thin films for surface protection against corrosion, erosion, abrasion, diffusion and for lubrication of contracting surfaces in relative motion.
Author: Sanjay Mavinkere Rangappa
Publisher: Elsevier
ISBN: 0443220301
Category : Technology & Engineering
Languages : en
Pages : 747
Get Book Here
Book Description
Surface Modification and Coating of Fibers, Polymers, and Composites: Techniques, Properties, and Applications outlines techniques, concepts, characterization, and applications of surface modification for fibers, polymers, and coated fiber-reinforced composites allowing for precision engineering of the mechanical and thermal properties, electrical conductivity, and chemical resistance of these materials. A broad range of fiber types are covered and the book highlights how surface modification enhances the durability and sustainability of them. The book starts with chapters that discuss surface modification techniques for a range of different fibers and composites, including animal-based, mineral, leaf-based, root-based, and more. The next section of the book covers surface coating techniques as well as morphology, characterization, and computational modeling of surface-coated materials, and the book concludes with a section that outlines the properties and applications of coated fiber composites. - Outlines techniques, concepts, characterization, and applications of surface modification of fibers, polymers, and coated fiber-reinforced composites - Techniques provided allow for precision tailoring of the mechanical and thermal properties, electrical conductivity, and chemical resistance of natural and synthetic fibers - Highlights the sustainability features of surface modification of these materials - Covers a variety of fiber types including synthetic, biofibers, MXene, and graphene-based
