Author: Douglas Winslow
Publisher:
ISBN: 9780070710733
Category : Building materials
Languages : en
Pages : 0
Book Description
Experiments with Construction Materials
Author: Douglas Winslow
Publisher:
ISBN: 9780070710733
Category : Building materials
Languages : en
Pages : 0
Book Description
Publisher:
ISBN: 9780070710733
Category : Building materials
Languages : en
Pages : 0
Book Description
Mechanics of Materials Laboratory Course
Author: Ghatu Subhash
Publisher: Morgan & Claypool Publishers
ISBN: 168173334X
Category : Technology & Engineering
Languages : en
Pages : 228
Book Description
This book is designed to provide lecture notes (theory) and experimental design of major concepts typically taught in most Mechanics of Materials courses in a sophomore- or junior-level Mechanical or Civil Engineering curriculum. Several essential concepts that engineers encounter in practice, such as statistical data treatment, uncertainty analysis, and Monte Carlo simulations, are incorporated into the experiments where applicable, and will become integral to each laboratory assignment. Use of common strain (stress) measurement techniques, such as strain gages, are emphasized. Application of basic electrical circuits, such as Wheatstone bridge for strain measurement, and use of load cells, accelerometers, etc., are employed in experiments. Stress analysis under commonly applied loads such as axial loading (compression and tension), shear loading, flexural loading (cantilever and four-point bending), impact loading, adhesive strength, creep, etc., are covered. LabVIEW software with relevant data acquisition (DAQ) system is used for all experiments. Two final projects each spanning 2‒3 weeks are included: (i) flexural loading with stress intensity factor determination and (ii) dynamic stress wave propagation in a slender rod and determination of the stress‒strain curves at high strain rates. The book provides theoretical concepts that are pertinent to each laboratory experiment and prelab assignment that a student should complete to prepare for the laboratory. Instructions for securing off-the-shelf components to design each experiment and their assembly (with figures) are provided. Calibration procedure is emphasized whenever students assemble components or design experiments. Detailed instructions for conducting experiments and table format for data gathering are provided. Each lab assignment has a set of questions to be answered upon completion of experiment and data analysis. Lecture notes provide detailed instructions on how to use LabVIEW software for data gathering during the experiment and conduct data analysis.
Publisher: Morgan & Claypool Publishers
ISBN: 168173334X
Category : Technology & Engineering
Languages : en
Pages : 228
Book Description
This book is designed to provide lecture notes (theory) and experimental design of major concepts typically taught in most Mechanics of Materials courses in a sophomore- or junior-level Mechanical or Civil Engineering curriculum. Several essential concepts that engineers encounter in practice, such as statistical data treatment, uncertainty analysis, and Monte Carlo simulations, are incorporated into the experiments where applicable, and will become integral to each laboratory assignment. Use of common strain (stress) measurement techniques, such as strain gages, are emphasized. Application of basic electrical circuits, such as Wheatstone bridge for strain measurement, and use of load cells, accelerometers, etc., are employed in experiments. Stress analysis under commonly applied loads such as axial loading (compression and tension), shear loading, flexural loading (cantilever and four-point bending), impact loading, adhesive strength, creep, etc., are covered. LabVIEW software with relevant data acquisition (DAQ) system is used for all experiments. Two final projects each spanning 2‒3 weeks are included: (i) flexural loading with stress intensity factor determination and (ii) dynamic stress wave propagation in a slender rod and determination of the stress‒strain curves at high strain rates. The book provides theoretical concepts that are pertinent to each laboratory experiment and prelab assignment that a student should complete to prepare for the laboratory. Instructions for securing off-the-shelf components to design each experiment and their assembly (with figures) are provided. Calibration procedure is emphasized whenever students assemble components or design experiments. Detailed instructions for conducting experiments and table format for data gathering are provided. Each lab assignment has a set of questions to be answered upon completion of experiment and data analysis. Lecture notes provide detailed instructions on how to use LabVIEW software for data gathering during the experiment and conduct data analysis.
Materials and Mechanics
Author: Jharna Chaudhuri
Publisher:
ISBN: 9781516553037
Category :
Languages : en
Pages : 116
Book Description
"The unique laboratory companion text Materials and Mechanics: Laboratory Experiments is comprised of an introductory chapter on safety protocols, followed by seven experiments in materials science engineering and solid mechanics. The book guides students through the experiments, and teaches them to calculate and report results and write follow-up reports. Chapters include theory components with the equations students need to calculate different properties. In addition, all chapters feature in-class problems to increase comprehension and retention of information related to the experiments, and data sheets to be used for recording purposes in the laboratory. Materials and Mechanics: Laboratory Experiments includes experiments on beam deflection, tensile testing, hardness testing, and impact testing. In addition, students will conduct experiments in heat treatment and qualitative metallographic analysis, torsion, and measurement of strain. Materials and Mechanics: Laboratory Experiments supports the content of an in-class text, and clarifies and facilitates laboratory work. It can be used as a standalone textbook. Jharna Chaudhuri holds a Ph.D. in mechanics and materials from Rutgers University. She is a professor and chair of the Department of Mechanical Engineering at Texas Tech University. She served as a Faculty Research Associate at Wright Patterson Air Force Base and Naval Research Laboratory, and has collaborated with Boeing and Cessna. Her research interests include nano-materials, high resolution transmission electron microscopy and x-ray diffraction. Archis Marathe holds an M.S. in mechanical engineering from Texas Tech University, where he is currently a Ph.D. candidate doing research in the field of nanotechnology. He is also an electron microscopist and is in charge of the Transmission Electron Microscopy facility for the department."
Publisher:
ISBN: 9781516553037
Category :
Languages : en
Pages : 116
Book Description
"The unique laboratory companion text Materials and Mechanics: Laboratory Experiments is comprised of an introductory chapter on safety protocols, followed by seven experiments in materials science engineering and solid mechanics. The book guides students through the experiments, and teaches them to calculate and report results and write follow-up reports. Chapters include theory components with the equations students need to calculate different properties. In addition, all chapters feature in-class problems to increase comprehension and retention of information related to the experiments, and data sheets to be used for recording purposes in the laboratory. Materials and Mechanics: Laboratory Experiments includes experiments on beam deflection, tensile testing, hardness testing, and impact testing. In addition, students will conduct experiments in heat treatment and qualitative metallographic analysis, torsion, and measurement of strain. Materials and Mechanics: Laboratory Experiments supports the content of an in-class text, and clarifies and facilitates laboratory work. It can be used as a standalone textbook. Jharna Chaudhuri holds a Ph.D. in mechanics and materials from Rutgers University. She is a professor and chair of the Department of Mechanical Engineering at Texas Tech University. She served as a Faculty Research Associate at Wright Patterson Air Force Base and Naval Research Laboratory, and has collaborated with Boeing and Cessna. Her research interests include nano-materials, high resolution transmission electron microscopy and x-ray diffraction. Archis Marathe holds an M.S. in mechanical engineering from Texas Tech University, where he is currently a Ph.D. candidate doing research in the field of nanotechnology. He is also an electron microscopist and is in charge of the Transmission Electron Microscopy facility for the department."
Civil Engineering Materials
Author: M. Rashad Islam
Publisher: CRC Press
ISBN: 1000759245
Category : Technology & Engineering
Languages : en
Pages : 478
Book Description
Civil Engineering Materials: Introduction and Laboratory Testing discusses the properties, characterization procedures, and analysis techniques of primary civil engineering materials. It presents the latest design considerations and uses of engineering materials as well as theories for fully understanding them through numerous worked mathematical examples. The book also includes important laboratory tests which are clearly described in a step-by-step manner and further illustrated by high-quality figures. Also, analysis equations and their applications are presented with appropriate examples and relevant practice problems, including Fundamentals of Engineering (FE) styled questions as well those found on the American Concrete Institute (ACI) Concrete Field Testing Technician - Grade I certification exam. Features: Includes numerous worked examples to illustrate the theories presented Presents Fundamentals of Engineering (FE) examination sample questions in each chapter Reviews the ACI Concrete Field Testing Technician - Grade I certification exam Utilizes the latest laboratory testing standards and practices Includes additional resources for instructors teaching related courses This book is intended for students in civil engineering, construction engineering, civil engineering technology, construction management engineering technology, and construction management programs.
Publisher: CRC Press
ISBN: 1000759245
Category : Technology & Engineering
Languages : en
Pages : 478
Book Description
Civil Engineering Materials: Introduction and Laboratory Testing discusses the properties, characterization procedures, and analysis techniques of primary civil engineering materials. It presents the latest design considerations and uses of engineering materials as well as theories for fully understanding them through numerous worked mathematical examples. The book also includes important laboratory tests which are clearly described in a step-by-step manner and further illustrated by high-quality figures. Also, analysis equations and their applications are presented with appropriate examples and relevant practice problems, including Fundamentals of Engineering (FE) styled questions as well those found on the American Concrete Institute (ACI) Concrete Field Testing Technician - Grade I certification exam. Features: Includes numerous worked examples to illustrate the theories presented Presents Fundamentals of Engineering (FE) examination sample questions in each chapter Reviews the ACI Concrete Field Testing Technician - Grade I certification exam Utilizes the latest laboratory testing standards and practices Includes additional resources for instructors teaching related courses This book is intended for students in civil engineering, construction engineering, civil engineering technology, construction management engineering technology, and construction management programs.
Abstracts of AF Materials Laboratory Reports
Author: Air Force Materials Laboratory (U.S.)
Publisher:
ISBN:
Category : Materials
Languages : en
Pages : 186
Book Description
Technical reports published by the Air Force Materials Laboratory during the period 1 January 1968-31 December 1968 are abstracted herein and indexed by branches of the laboratory, technical subject matter, investigator, project monitor and contractor. Reports on research conducted by the Air Force Materials Laboratory personnel as well as that conducted on contract are included.
Publisher:
ISBN:
Category : Materials
Languages : en
Pages : 186
Book Description
Technical reports published by the Air Force Materials Laboratory during the period 1 January 1968-31 December 1968 are abstracted herein and indexed by branches of the laboratory, technical subject matter, investigator, project monitor and contractor. Reports on research conducted by the Air Force Materials Laboratory personnel as well as that conducted on contract are included.
Mechanics of Materials Laboratory Course
Author: Ghatu Zimmerman
Publisher: Springer Nature
ISBN: 3031797213
Category : Technology & Engineering
Languages : en
Pages : 204
Book Description
This book is designed to provide lecture notes (theory) and experimental design of major concepts typically taught in most Mechanics of Materials courses in a sophomore- or junior-level Mechanical or Civil Engineering curriculum. Several essential concepts that engineers encounter in practice, such as statistical data treatment, uncertainty analysis, and Monte Carlo simulations, are incorporated into the experiments where applicable, and will become integral to each laboratory assignment. Use of common strain (stress) measurement techniques, such as strain gages, are emphasized. Application of basic electrical circuits, such as Wheatstone bridge for strain measurement, and use of load cells, accelerometers, etc., are employed in experiments. Stress analysis under commonly applied loads such as axial loading (compression and tension), shear loading, flexural loading (cantilever and four-point bending), impact loading, adhesive strength, creep, etc., are covered. LabVIEW software with relevant data acquisition (DAQ) system is used for all experiments. Two final projects each spanning 2-3 weeks are included: (i) flexural loading with stress intensity factor determination and (ii) dynamic stress wave propagation in a slender rod and determination of the stress-strain curves at high strain rates. The book provides theoretical concepts that are pertinent to each laboratory experiment and prelab assignment that a student should complete to prepare for the laboratory. Instructions for securing off-the-shelf components to design each experiment and their assembly (with figures) are provided. Calibration procedure is emphasized whenever students assemble components or design experiments. Detailed instructions for conducting experiments and table format for data gathering are provided. Each lab assignment has a set of questions to be answered upon completion of experiment and data analysis. Lecture notes provide detailed instructions on how to use LabVIEW software for data gathering during the experiment and conduct data analysis.
Publisher: Springer Nature
ISBN: 3031797213
Category : Technology & Engineering
Languages : en
Pages : 204
Book Description
This book is designed to provide lecture notes (theory) and experimental design of major concepts typically taught in most Mechanics of Materials courses in a sophomore- or junior-level Mechanical or Civil Engineering curriculum. Several essential concepts that engineers encounter in practice, such as statistical data treatment, uncertainty analysis, and Monte Carlo simulations, are incorporated into the experiments where applicable, and will become integral to each laboratory assignment. Use of common strain (stress) measurement techniques, such as strain gages, are emphasized. Application of basic electrical circuits, such as Wheatstone bridge for strain measurement, and use of load cells, accelerometers, etc., are employed in experiments. Stress analysis under commonly applied loads such as axial loading (compression and tension), shear loading, flexural loading (cantilever and four-point bending), impact loading, adhesive strength, creep, etc., are covered. LabVIEW software with relevant data acquisition (DAQ) system is used for all experiments. Two final projects each spanning 2-3 weeks are included: (i) flexural loading with stress intensity factor determination and (ii) dynamic stress wave propagation in a slender rod and determination of the stress-strain curves at high strain rates. The book provides theoretical concepts that are pertinent to each laboratory experiment and prelab assignment that a student should complete to prepare for the laboratory. Instructions for securing off-the-shelf components to design each experiment and their assembly (with figures) are provided. Calibration procedure is emphasized whenever students assemble components or design experiments. Detailed instructions for conducting experiments and table format for data gathering are provided. Each lab assignment has a set of questions to be answered upon completion of experiment and data analysis. Lecture notes provide detailed instructions on how to use LabVIEW software for data gathering during the experiment and conduct data analysis.
History of the Air Force Materials Laboratory
Author:
Publisher:
ISBN:
Category : Materials
Languages : en
Pages : 140
Book Description
Publisher:
ISBN:
Category : Materials
Languages : en
Pages : 140
Book Description
Abstracts of Active Contracts, Air Force Materials Laboratory
Author: Air Force Materials Laboratory (U.S.).
Publisher:
ISBN:
Category : Defense contracts
Languages : en
Pages : 112
Book Description
Abstracts of Air Force Materials Laboratory contracts that were active on 28 February 1969 are reported, The abstracts are ordered by Divisions of the Laboratory and are indexed by contract number and task number. Each abstract entry provides the title of the contract, contractor, duration, project engineer, objective and progress.
Publisher:
ISBN:
Category : Defense contracts
Languages : en
Pages : 112
Book Description
Abstracts of Air Force Materials Laboratory contracts that were active on 28 February 1969 are reported, The abstracts are ordered by Divisions of the Laboratory and are indexed by contract number and task number. Each abstract entry provides the title of the contract, contractor, duration, project engineer, objective and progress.
Abstracts of Active Contracts, Air Force Materials Laboratory
Author:
Publisher:
ISBN:
Category : Defense contracts
Languages : en
Pages : 116
Book Description
Publisher:
ISBN:
Category : Defense contracts
Languages : en
Pages : 116
Book Description
Engineering Tests on Mobile Materials Laboratory M-11
Author: Waterways Experiment Station (U.S.)
Publisher:
ISBN:
Category : Testing laboratories
Languages : en
Pages : 46
Book Description
Publisher:
ISBN:
Category : Testing laboratories
Languages : en
Pages : 46
Book Description