IUTAM Symposium on Rheology of Bodies with Defects PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download IUTAM Symposium on Rheology of Bodies with Defects PDF full book. Access full book title IUTAM Symposium on Rheology of Bodies with Defects by Ren Wang. Download full books in PDF and EPUB format.
Author: Ren Wang
Publisher: Springer Science & Business Media
ISBN: 0306469375
Category : Science
Languages : en
Pages : 305
Get Book Here
Book Description
The IUTAM Symposium on Rheology of Bodies with Defects was held in Beijing in September, 1997. It was aimed at the development of Rheology in Solid Mechanics. Rheology is classified in Applied Mechanics Review under fluid mechanics, however, in its broadest content as was envisaged in its earlier days, it covers the whole spectrum of material behavior from elasticity, plasticity, and fluid mechanics to gas dynamics. It was thought of as a branch of continuum mechanics, but emphasized the physical aspects of different materials, and frequently proceeded from basic physical principles. As the temperature rises, the distinction between solid and fluid, and the distinction between their micro-mechanical movements, become blurred. The physical description of such materials and their movements must be based on the thermodynamic principles of state variable theory; the classical division between solid and fluid mechanics disappears. Under the classification adopted by Applied Mechanics Reviews, the subjects dealt with in this symposium come closer to viscoelasticity and viscoplasticity, especially close to the subdivision of creep dealing with creep rupture. The symposium focused at building a bridge between macroscopic and microscopic research on damage and fracture behavior of defective bodies made of metal, polymer, composite and other viscoelastic materials. Two different approaches are presented at the symposium. The first is a continuum damage theory for time-dependent evolution of defects at the macro/meso/microscopic levels.
Author: Ren Wang
Publisher: Springer Science & Business Media
ISBN: 0306469375
Category : Science
Languages : en
Pages : 305
Get Book Here
Book Description
The IUTAM Symposium on Rheology of Bodies with Defects was held in Beijing in September, 1997. It was aimed at the development of Rheology in Solid Mechanics. Rheology is classified in Applied Mechanics Review under fluid mechanics, however, in its broadest content as was envisaged in its earlier days, it covers the whole spectrum of material behavior from elasticity, plasticity, and fluid mechanics to gas dynamics. It was thought of as a branch of continuum mechanics, but emphasized the physical aspects of different materials, and frequently proceeded from basic physical principles. As the temperature rises, the distinction between solid and fluid, and the distinction between their micro-mechanical movements, become blurred. The physical description of such materials and their movements must be based on the thermodynamic principles of state variable theory; the classical division between solid and fluid mechanics disappears. Under the classification adopted by Applied Mechanics Reviews, the subjects dealt with in this symposium come closer to viscoelasticity and viscoplasticity, especially close to the subdivision of creep dealing with creep rupture. The symposium focused at building a bridge between macroscopic and microscopic research on damage and fracture behavior of defective bodies made of metal, polymer, composite and other viscoelastic materials. Two different approaches are presented at the symposium. The first is a continuum damage theory for time-dependent evolution of defects at the macro/meso/microscopic levels.
Author: A.B. Movchan
Publisher: Springer
ISBN: 1402026048
Category : Science
Languages : en
Pages : 609
Get Book Here
Book Description
Proceedings of the IUTAM Symposium held in Liverpool, UK, 8-11 July 2002
Author: V.V. Aristov
Publisher: Springer Science & Business Media
ISBN: 9401008663
Category : Science
Languages : en
Pages : 305
Get Book Here
Book Description
This book is concerned with the methods of solving the nonlinear Boltz mann equation and of investigating its possibilities for describing some aerodynamic and physical problems. This monograph is a sequel to the book 'Numerical direct solutions of the kinetic Boltzmann equation' (in Russian) which was written with F. G. Tcheremissine and published by the Computing Center of the Russian Academy of Sciences some years ago. The main purposes of these two books are almost similar, namely, the study of nonequilibrium gas flows on the basis of direct integration of the kinetic equations. Nevertheless, there are some new aspects in the way this topic is treated in the present monograph. In particular, attention is paid to the advantages of the Boltzmann equation as a tool for considering nonequi librium, nonlinear processes. New fields of application of the Boltzmann equation are also described. Solutions of some problems are obtained with higher accuracy. Numerical procedures, such as parallel computing, are in vestigated for the first time. The structure and the contents of the present book have some com mon features with the monograph mentioned above, although there are new issues concerning the mathematical apparatus developed so that the Boltzmann equation can be applied for new physical problems. Because of this some chapters have been rewritten and checked again and some new chapters have been added.
Author: Liviu Librescu
Publisher: Springer Science & Business Media
ISBN: 1402042035
Category : Technology & Engineering
Languages : en
Pages : 627
Get Book Here
Book Description
Annotation This is the first monograph devoted to the foundation of the theory of composite anisotropic thin-walled beams and to its applications in various problems involving the aeronautical/aerospace, helicopter, naval and mechanical structures. Throughout the theoretical part, an effort was made to provide the treatment of the subject by using the equations of the 3-D elasticity theory. Non-classical effects such as transverse shear, warping constraint, anisotropy of constituent materials yielding the coupling of twist-bending (lateral), bending (transversal)-extension have been included and their implications have been thoroughly analyzed. Thermal effects have been included and in order to be able to circumvent their deleterious effects, functionally graded materials have been considered in their construction. Implications of the application of the tailoring technique and of the active feedback control on free vibration, dynamic response, instability and aeroelasticity of such structures have been amply investigated. Special care was exercised throughout this work to address and validate the adopted solution methodologies and the obtained results against those available in the literature and obtained via numerical or experimental means.
Author: Jack R. Vinson
Publisher: Springer
ISBN: 0306484145
Category : Science
Languages : en
Pages : 457
Get Book Here
Book Description
Composite structures and products have developed tremendously since the publication of the first edition of this work in 1986. This new edition of the now classic 1986 text has been written to educate the engineering reader in the various aspects of mechanics for using composite materials in the design and analysis of composite structures and products. Areas dealt with include manufacture, micromechanical properties, structural design, joints and bonding and a much needed introduction to composite design philosophy. Each chapter is concluded by numerous problems suitable for home assignments or examination. A solution guide is available on request from the authors.
Author: Viorel Arnăutu
Publisher: Springer Science & Business Media
ISBN: 9401724881
Category : Computers
Languages : en
Pages : 337
Get Book Here
Book Description
The aim of this book is to present the mathematical theory and the know-how to make computer programs for the numerical approximation of Optimal Control of PDE's. The computer programs are presented in a straightforward generic language. As a consequence they are well structured, clearly explained and can be translated easily into any high level programming language. Applications and corresponding numerical tests are also given and discussed. To our knowledge, this is the first book to put together mathematics and computer programs for Optimal Control in order to bridge the gap between mathematical abstract algorithms and concrete numerical ones. The text is addressed to students and graduates in Mathematics, Mechanics, Applied Mathematics, Numerical Software, Information Technology and Engineering. It can also be used for Master and Ph.D. programs.
Author: Uri Kirsch
Publisher: Springer Science & Business Media
ISBN: 1402081987
Category : Technology & Engineering
Languages : en
Pages : 308
Get Book Here
Book Description
This book deals with various computational procedures for multiple repeated analyses (reanalysis) of structures, and presents them in a unified approach. It meets the need for a general text covering the basic concepts and methods as well as recent developments in this area. To clarify the presentation, many illustrative examples and numerical results are demonstrated. Previous books on structural analysis do not cover most of the material presented here.
Author: S.D. Akbarov
Publisher: Springer Science & Business Media
ISBN: 9401095043
Category : Science
Languages : en
Pages : 452
Get Book Here
Book Description
This book is the frrst to focus on mechanical aspects of fibrous and layered composite material with curved structure. By mechanical aspects we mean statics, vibration, stability loss, elastic and fracture problems. By curved structures we mean that the reinforcing layers or fibres are not straight: they have some initial curvature, bending or distortion. This curvature may occur as a result of design, or as a consequence of some technological process. During the last two decades, we and our students have investigated problems relating to curved composites intensively. These investigations have allowed us to study stresses and strains in regions of a composite which are small compared to the curvature wavelength. These new, accurate, techniques were developed in the framework of continuum theories for piecewise homogeneous bodies. We use the exact equations of elasticity or viscoelasticity for anisotropic bodies, and consider linear and non-linear problems in the framework of this continuum theory as well as in the framework of the piecewise homogeneous model. For the latter the method of solution of related problems is proposed. We have focussed our attention on self-balanced stresses which arise from the curvature, but have provided sufficient information for the study of other effects. We assume that the reader is familiar with the theory of elasticity for anisotropic bodies, with partial differential equations and integral transformations, and also with the Finite Element Method.
Author: G.Q. Zhang
Publisher: Springer Science & Business Media
ISBN: 1402049358
Category : Technology & Engineering
Languages : en
Pages : 580
Get Book Here
Book Description
This book is written by leading experts with both profound knowledge and rich practical experience in advanced mechanics and the microelectronics industry essential for current and future development. It aims to provide the cutting edge knowledge and solutions for various mechanical related problems, in a systematic way. It contains important and detailed information about the state-of-the-art theories, methodologies, the way of working and real case studies.
Author: Uri Kirsch
Publisher: Springer Science & Business Media
ISBN: 0306486318
Category : Technology & Engineering
Languages : en
Pages : 247
Get Book Here
Book Description
This book was developed while I was teaching graduate courses on analysis, design and optimization of structures, in the United States, Europe and Israel. Structural analysis is a main part of any design problem, and the analysis often must be repeated many times during the design process. Much work has been done on design-oriented analysis of structures recently and many studies have been published. The purpose of the book is to collect together selected topics of this literature and to present them in a unified approach. It meets the need for a general text covering the basic concepts and methods as well as recent developments in this area. This should prove useful to students, researchers, consultants and practicing engineers involved in analysis and design of structures. Previous books on structural analysis do not cover most of the material presented in the book. The book deals with the problem of multiple repeated analyses (reanalysis) of structures that is common to numerous analysis and design tasks. Reanalysis is needed in many areas such as structural optimization, analysis of damaged structures, nonlinear analysis, probabilistic analysis, controlled structures, smart structures and adaptive structures. It is related to a wide range of applications in such fields as Aerospace Engineering, Civil Engineering, Mechanical Engineering and Naval Architecture.
