Author: A. M. A. Rezk
Publisher: Elsevier
ISBN: 1483147088
Category : Technology & Engineering
Languages : en
Pages : 319
Book Description
Heat and Fluid Flow in Power System Components is a collection of papers presented at the Second Conference on Mechanical Power Engineering held in Cairo, Egypt in September 1978. This volume covers a wide range of topics relating to heat and fluid flow in power system components, including film cooling, droplet evaporation, and laminar flames. Practical applications such as furnaces, heat exchanges, pumps, and turbines are also discussed. Results of investigations carried out experimentally, by computation, and both computation and experimentation techniques are presented. This book is comprised of 21 chapters and begins with an analysis of heat transfer in power elements, including evaporation of surface liquid droplet in an air stream. The thermal conductivity of granular materials is also examined. The following chapters explore reactive and non-reactive flows, paying particular attention to helium two-phase instabilities; air flow around hyperbolic cooling towers; pulsating flow in axial turbines; laminar flame propagation in tubes; and characteristics of combustion heat liberated downstream of circular bluff bodies. The final chapter is devoted to an experimental and theoretical investigation of the reversed flow furnace. This monograph will be of interest to chemical and mechanical engineers as well as researchers concerned with the design, development, and optimum modes of operations of power systems and their components.
Heat and Fluid Flow in Power System Components
Author: A. M. A. Rezk
Publisher: Elsevier
ISBN: 1483147088
Category : Technology & Engineering
Languages : en
Pages : 319
Book Description
Heat and Fluid Flow in Power System Components is a collection of papers presented at the Second Conference on Mechanical Power Engineering held in Cairo, Egypt in September 1978. This volume covers a wide range of topics relating to heat and fluid flow in power system components, including film cooling, droplet evaporation, and laminar flames. Practical applications such as furnaces, heat exchanges, pumps, and turbines are also discussed. Results of investigations carried out experimentally, by computation, and both computation and experimentation techniques are presented. This book is comprised of 21 chapters and begins with an analysis of heat transfer in power elements, including evaporation of surface liquid droplet in an air stream. The thermal conductivity of granular materials is also examined. The following chapters explore reactive and non-reactive flows, paying particular attention to helium two-phase instabilities; air flow around hyperbolic cooling towers; pulsating flow in axial turbines; laminar flame propagation in tubes; and characteristics of combustion heat liberated downstream of circular bluff bodies. The final chapter is devoted to an experimental and theoretical investigation of the reversed flow furnace. This monograph will be of interest to chemical and mechanical engineers as well as researchers concerned with the design, development, and optimum modes of operations of power systems and their components.
Publisher: Elsevier
ISBN: 1483147088
Category : Technology & Engineering
Languages : en
Pages : 319
Book Description
Heat and Fluid Flow in Power System Components is a collection of papers presented at the Second Conference on Mechanical Power Engineering held in Cairo, Egypt in September 1978. This volume covers a wide range of topics relating to heat and fluid flow in power system components, including film cooling, droplet evaporation, and laminar flames. Practical applications such as furnaces, heat exchanges, pumps, and turbines are also discussed. Results of investigations carried out experimentally, by computation, and both computation and experimentation techniques are presented. This book is comprised of 21 chapters and begins with an analysis of heat transfer in power elements, including evaporation of surface liquid droplet in an air stream. The thermal conductivity of granular materials is also examined. The following chapters explore reactive and non-reactive flows, paying particular attention to helium two-phase instabilities; air flow around hyperbolic cooling towers; pulsating flow in axial turbines; laminar flame propagation in tubes; and characteristics of combustion heat liberated downstream of circular bluff bodies. The final chapter is devoted to an experimental and theoretical investigation of the reversed flow furnace. This monograph will be of interest to chemical and mechanical engineers as well as researchers concerned with the design, development, and optimum modes of operations of power systems and their components.
Energy Research Abstracts
Author:
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 484
Book Description
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 484
Book Description
Thermal Engineering in Power Systems
Author: Ryoichi Amano
Publisher: WIT Press
ISBN: 1845640624
Category : Technology & Engineering
Languages : en
Pages : 417
Book Description
Research and development in thermal engineering for power systems are of significant importance to many scientists who are engaged in research and design work in power-related industries and laboratories. This book focuses on variety of research areas including Components of Compressor and Turbines that are used for both electric power systems and aero engines, Fuel Cells, Energy Conversion, and Energy Reuse and Recycling Systems. To be competitive in today's market, power systems need to reduce the operating costs, increase capacity factors and deal with many other tough issues. Heat Transfer and fluid flow issues are of great significance and it is likely that a state-of-the-art edited book with reference to power systems will make a contribution for design and R&D engineers and the development towards sustainable energy systems.
Publisher: WIT Press
ISBN: 1845640624
Category : Technology & Engineering
Languages : en
Pages : 417
Book Description
Research and development in thermal engineering for power systems are of significant importance to many scientists who are engaged in research and design work in power-related industries and laboratories. This book focuses on variety of research areas including Components of Compressor and Turbines that are used for both electric power systems and aero engines, Fuel Cells, Energy Conversion, and Energy Reuse and Recycling Systems. To be competitive in today's market, power systems need to reduce the operating costs, increase capacity factors and deal with many other tough issues. Heat Transfer and fluid flow issues are of great significance and it is likely that a state-of-the-art edited book with reference to power systems will make a contribution for design and R&D engineers and the development towards sustainable energy systems.
Fluid Mechanics and Fluid Power (Vol. 1)
Author: Suvanjan Bhattacharyya
Publisher: Springer Nature
ISBN: 9811970556
Category : Technology & Engineering
Languages : en
Pages : 479
Book Description
This book presents the select proceedings of the 48th National Conference on Fluid Mechanics and Fluid Power (FMFP 2021) held at BITS Pilani in December 2021. It covers the topics such as fluid mechanics, measurement techniques in fluid flows, computational fluid dynamics, instability, transition and turbulence, fluidâstructure interaction, multiphase flows, micro- and nanoscale transport, bio-fluid mechanics, aerodynamics, turbomachinery, propulsion and power. The book will be useful for researchers and professionals interested in the broad field of mechanics.
Publisher: Springer Nature
ISBN: 9811970556
Category : Technology & Engineering
Languages : en
Pages : 479
Book Description
This book presents the select proceedings of the 48th National Conference on Fluid Mechanics and Fluid Power (FMFP 2021) held at BITS Pilani in December 2021. It covers the topics such as fluid mechanics, measurement techniques in fluid flows, computational fluid dynamics, instability, transition and turbulence, fluidâstructure interaction, multiphase flows, micro- and nanoscale transport, bio-fluid mechanics, aerodynamics, turbomachinery, propulsion and power. The book will be useful for researchers and professionals interested in the broad field of mechanics.
Modelling and Control of Electric Power Plants
Author: C. Maffezzoni
Publisher: Elsevier
ISBN: 1483148637
Category : Technology & Engineering
Languages : en
Pages : 176
Book Description
Modelling and Control of Electric Power Plants focuses on the modeling and simulation of thermal and nuclear units; the methods and technologies of advanced control systems that are applied in power stations; the design and analysis of man-machine systems; and the processes in power generation. Contained in the book are the literature of contributors who have done research on design and operation of electric power plants. The book begins with the development of models of electric power plants and nuclear power plants. Simulations, analysis, and studies are conducted to test the processes and controls that are instituted in the operations of these plants. Another part of the discussion focuses on the control mechanisms that are employed in plants. These computer control systems are deemed essential in the operations of these plants. The role that computers play in plants is noted, which is particularly observed in the operation of equipment, control of conditions, and application of operational processes in these areas. Some of the areas in which modeling is carried out include electric power plants, fossil fuel power plants, boilers, and coal plants. The discussions can be a source of information to those interested in the design, control, and operation of power plants.
Publisher: Elsevier
ISBN: 1483148637
Category : Technology & Engineering
Languages : en
Pages : 176
Book Description
Modelling and Control of Electric Power Plants focuses on the modeling and simulation of thermal and nuclear units; the methods and technologies of advanced control systems that are applied in power stations; the design and analysis of man-machine systems; and the processes in power generation. Contained in the book are the literature of contributors who have done research on design and operation of electric power plants. The book begins with the development of models of electric power plants and nuclear power plants. Simulations, analysis, and studies are conducted to test the processes and controls that are instituted in the operations of these plants. Another part of the discussion focuses on the control mechanisms that are employed in plants. These computer control systems are deemed essential in the operations of these plants. The role that computers play in plants is noted, which is particularly observed in the operation of equipment, control of conditions, and application of operational processes in these areas. Some of the areas in which modeling is carried out include electric power plants, fossil fuel power plants, boilers, and coal plants. The discussions can be a source of information to those interested in the design, control, and operation of power plants.
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 328
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 328
Book Description
Tenth E.C. Photovoltaic Solar Energy Conference
Author: A. Luque
Publisher: Springer
ISBN: 940113622X
Category : Technology & Engineering
Languages : en
Pages : 1437
Book Description
I have great pleasure in presenting the Proceedings of the 10th European Photovoltaic Solar Energy Conference held in Lisbon from 8 to 12 April 1991. These Proceedings contain all the scientific papers delivered at the Conference. The following is a short summary of the Conference activities. The Conference was opened by the Minister of Industry and Energy of Portugal, Eng. Luis Mira do Amaral. At the opening ceremony the Becquerel Prize, created by the Commission of the European Communities, was awarded to Professor Werner Bloss of the University of Stuttgart, and presented by Professor Philippe Bourdeau, Director at the Directorate-General for Science, Research and Development. The Becquerellecture delivered by Professor Bloss constituted the scientific opening to the conference. About 760 delegates from 53 countries presented around 350 contributions, 50 of them as plenary lectures; the contributions were selected among the many papers submitted, this time more strictly than ever before. Also a selected group of scientists were invited to deliver 15 review lectures, to provide an adequate context to the contributions to the Conference. A Symposium on Photovoltaics in Developing Countries, which was very well attended, took place as a parallel event. The Symposium provided an opportunity to hear not only experts of the industrialized countries, but also speakers from the countries where photovoltaics provides services of paramount value.
Publisher: Springer
ISBN: 940113622X
Category : Technology & Engineering
Languages : en
Pages : 1437
Book Description
I have great pleasure in presenting the Proceedings of the 10th European Photovoltaic Solar Energy Conference held in Lisbon from 8 to 12 April 1991. These Proceedings contain all the scientific papers delivered at the Conference. The following is a short summary of the Conference activities. The Conference was opened by the Minister of Industry and Energy of Portugal, Eng. Luis Mira do Amaral. At the opening ceremony the Becquerel Prize, created by the Commission of the European Communities, was awarded to Professor Werner Bloss of the University of Stuttgart, and presented by Professor Philippe Bourdeau, Director at the Directorate-General for Science, Research and Development. The Becquerellecture delivered by Professor Bloss constituted the scientific opening to the conference. About 760 delegates from 53 countries presented around 350 contributions, 50 of them as plenary lectures; the contributions were selected among the many papers submitted, this time more strictly than ever before. Also a selected group of scientists were invited to deliver 15 review lectures, to provide an adequate context to the contributions to the Conference. A Symposium on Photovoltaics in Developing Countries, which was very well attended, took place as a parallel event. The Symposium provided an opportunity to hear not only experts of the industrialized countries, but also speakers from the countries where photovoltaics provides services of paramount value.
Renewable Energy From the Ocean
Author: William H. Avery
Publisher: Oxford University Press
ISBN: 0195361113
Category : Science
Languages : en
Pages : 477
Book Description
Scientists and engineers around the world are striving to develop new sources of energy. One source, ocean thermal energy conversion, has virtually unlimited potential. It is based on techniques that exploit heat produced by solar energy that may, in turn, be used to produce fuel and electricity. This book reviews the status and background of this promising technology. William H. Avery is the leading expert in this field, and his co-author Chih Wu is an authority on heat engine performance. Together they describe the workings of an OTEC power plant and how such a system might be implemented as part of a futuristic national energy strategy. The book is the only detailed presentation of basic OTEC technology, its testing and improvement. It is based on extensive development initiatives undertaken internationally during the period from 1974 through 1985. The book offers a thorough assessment of the economics of OTEC in comparison with other energy production methods. It will be of interest to a wide range of professionals in energy research, power and mechanical engineering, and to upper-level undergraduate students taking courses in these fields.
Publisher: Oxford University Press
ISBN: 0195361113
Category : Science
Languages : en
Pages : 477
Book Description
Scientists and engineers around the world are striving to develop new sources of energy. One source, ocean thermal energy conversion, has virtually unlimited potential. It is based on techniques that exploit heat produced by solar energy that may, in turn, be used to produce fuel and electricity. This book reviews the status and background of this promising technology. William H. Avery is the leading expert in this field, and his co-author Chih Wu is an authority on heat engine performance. Together they describe the workings of an OTEC power plant and how such a system might be implemented as part of a futuristic national energy strategy. The book is the only detailed presentation of basic OTEC technology, its testing and improvement. It is based on extensive development initiatives undertaken internationally during the period from 1974 through 1985. The book offers a thorough assessment of the economics of OTEC in comparison with other energy production methods. It will be of interest to a wide range of professionals in energy research, power and mechanical engineering, and to upper-level undergraduate students taking courses in these fields.
NASA Technical Note
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1158
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1158
Book Description
Official Gazette of the United States Patent and Trademark Office
Author:
Publisher:
ISBN:
Category : Trademarks
Languages : en
Pages : 526
Book Description
Publisher:
ISBN:
Category : Trademarks
Languages : en
Pages : 526
Book Description