Author: Milton A. Beheim
Publisher:
ISBN:
Category : Axial flow
Languages : en
Pages : 44
Book Description
A theoretical and experimental investigation has been conducted of the pressure distribution on the surface of either a circular cylinder or a truncated cone located within the base region of another circular cylinder at Mach number 2. A similar analysis of pressure distribution was made for rearward-facing two-dimensional steps, and theoretical results were compared with experimental results of earlier investigations. Theoretical base-pressure ratios of two-dimensional steps agreed well with experimental results; however, as a result of the simplifying assumptions made for axisymmetric configurations, only a range of values for theoretical base-pressure ratio could be calculated within which the experimental results were expected to occur. The data generally followed the trends predicted by the theory, and deviations apparently could be explained.
Flow in the Base Region of Axisymmetric and Two-dimensional Configurations
Author: Milton A. Beheim
Publisher:
ISBN:
Category : Axial flow
Languages : en
Pages : 44
Book Description
A theoretical and experimental investigation has been conducted of the pressure distribution on the surface of either a circular cylinder or a truncated cone located within the base region of another circular cylinder at Mach number 2. A similar analysis of pressure distribution was made for rearward-facing two-dimensional steps, and theoretical results were compared with experimental results of earlier investigations. Theoretical base-pressure ratios of two-dimensional steps agreed well with experimental results; however, as a result of the simplifying assumptions made for axisymmetric configurations, only a range of values for theoretical base-pressure ratio could be calculated within which the experimental results were expected to occur. The data generally followed the trends predicted by the theory, and deviations apparently could be explained.
Publisher:
ISBN:
Category : Axial flow
Languages : en
Pages : 44
Book Description
A theoretical and experimental investigation has been conducted of the pressure distribution on the surface of either a circular cylinder or a truncated cone located within the base region of another circular cylinder at Mach number 2. A similar analysis of pressure distribution was made for rearward-facing two-dimensional steps, and theoretical results were compared with experimental results of earlier investigations. Theoretical base-pressure ratios of two-dimensional steps agreed well with experimental results; however, as a result of the simplifying assumptions made for axisymmetric configurations, only a range of values for theoretical base-pressure ratio could be calculated within which the experimental results were expected to occur. The data generally followed the trends predicted by the theory, and deviations apparently could be explained.
Flow in the Base Region of Axisymmetric and Two-dimensional Configurations
Author: Milton A. Beheim
Publisher:
ISBN:
Category : Axial flow
Languages : en
Pages : 32
Book Description
A theoretical and experimental investigation has been conducted of the pressure distribution on the surface of either a circular cylinder or a truncated cone located within the base region of another circular cylinder at Mach number 2. A similar analysis of pressure distribution was made for rearward-facing two-dimensional steps, and theoretical results were compared with experimental results of earlier investigations. Theoretical base-pressure ratios of two-dimensional steps agreed well with experimental results; however, as a result of the simplifying assumptions made for axisymmetric configurations, only a range of values for theoretical base-pressure ratio could be calculated within which the experimental results were expected to occur. The data generally followed the trends predicted by the theory, and deviations apparently could be explained.
Publisher:
ISBN:
Category : Axial flow
Languages : en
Pages : 32
Book Description
A theoretical and experimental investigation has been conducted of the pressure distribution on the surface of either a circular cylinder or a truncated cone located within the base region of another circular cylinder at Mach number 2. A similar analysis of pressure distribution was made for rearward-facing two-dimensional steps, and theoretical results were compared with experimental results of earlier investigations. Theoretical base-pressure ratios of two-dimensional steps agreed well with experimental results; however, as a result of the simplifying assumptions made for axisymmetric configurations, only a range of values for theoretical base-pressure ratio could be calculated within which the experimental results were expected to occur. The data generally followed the trends predicted by the theory, and deviations apparently could be explained.
Flow in Base Region of Axisymmetric and 2-dimensional Configurations [with List of References]
Author:
Publisher:
ISBN:
Category : Axial flow
Languages : en
Pages : 32
Book Description
Publisher:
ISBN:
Category : Axial flow
Languages : en
Pages : 32
Book Description
NASA Technical Report
Author:
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 52
Book Description
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 52
Book Description
Analytical Study of Soft Landings on Gas-filled Bags
Author: Jack B. Esgar
Publisher:
ISBN:
Category : Gas
Languages : en
Pages : 732
Book Description
Publisher:
ISBN:
Category : Gas
Languages : en
Pages : 732
Book Description
NASA Technical Note
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 306
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 306
Book Description
A Collection of Technical Papers
Author:
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 288
Book Description
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 288
Book Description
NASA Technical Memorandum
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 104
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 104
Book Description
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 704
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 704
Book Description
Compressibility, Turbulence and High Speed Flow
Author: Thomas B. Gatski
Publisher: Academic Press
ISBN: 012397318X
Category : Science
Languages : en
Pages : 343
Book Description
Compressibility, Turbulence and High Speed Flow introduces the reader to the field of compressible turbulence and compressible turbulent flows across a broad speed range, through a unique complimentary treatment of both the theoretical foundations and the measurement and analysis tools currently used. The book provides the reader with the necessary background and current trends in the theoretical and experimental aspects of compressible turbulent flows and compressible turbulence. Detailed derivations of the pertinent equations describing the motion of such turbulent flows is provided and an extensive discussion of the various approaches used in predicting both free shear and wall bounded flows is presented. Experimental measurement techniques common to the compressible flow regime are introduced with particular emphasis on the unique challenges presented by high speed flows. Both experimental and numerical simulation work is supplied throughout to provide the reader with an overall perspective of current trends. An introduction to current techniques in compressible turbulent flow analysis An approach that enables engineers to identify and solve complex compressible flow challenges Prediction methodologies, including the Reynolds-averaged Navier Stokes (RANS) method, scale filtered methods and direct numerical simulation (DNS) Current strategies focusing on compressible flow control
Publisher: Academic Press
ISBN: 012397318X
Category : Science
Languages : en
Pages : 343
Book Description
Compressibility, Turbulence and High Speed Flow introduces the reader to the field of compressible turbulence and compressible turbulent flows across a broad speed range, through a unique complimentary treatment of both the theoretical foundations and the measurement and analysis tools currently used. The book provides the reader with the necessary background and current trends in the theoretical and experimental aspects of compressible turbulent flows and compressible turbulence. Detailed derivations of the pertinent equations describing the motion of such turbulent flows is provided and an extensive discussion of the various approaches used in predicting both free shear and wall bounded flows is presented. Experimental measurement techniques common to the compressible flow regime are introduced with particular emphasis on the unique challenges presented by high speed flows. Both experimental and numerical simulation work is supplied throughout to provide the reader with an overall perspective of current trends. An introduction to current techniques in compressible turbulent flow analysis An approach that enables engineers to identify and solve complex compressible flow challenges Prediction methodologies, including the Reynolds-averaged Navier Stokes (RANS) method, scale filtered methods and direct numerical simulation (DNS) Current strategies focusing on compressible flow control