Experimental Study of Stability and Transition of Hypersonic Boundary Layer Around Blunted Cone PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Experimental Study of Stability and Transition of Hypersonic Boundary Layer Around Blunted Cone PDF full book. Access full book title Experimental Study of Stability and Transition of Hypersonic Boundary Layer Around Blunted Cone by Antoloy Alexandrovich Maslov. Download full books in PDF and EPUB format.
Author: Antoloy Alexandrovich Maslov
Publisher:
ISBN:
Category : Aerodynamics, Hypersonic
Languages : en
Pages : 69
Get Book Here
Book Description
The objective of this project is to basic research of stability and transition of hypersonic boundary layer around blunted cone. Next results is obtained: -experimental data on the position of the laminar-turbulent transition in the boundary layer of a cone with different nose bluntness for Mach 6; -experimental data on the characteristics of natural disturbances in the hypersonic boundary layer of a blunted cone for Mach 6; -experimental data on the evolution of artificial disturbances, excited in the hypersonic boundary layer on a blunted cone for Mach 6. Acquired experimental data could be used for validation of numerical techniques. Using of obtained data will help to more accurate prediction of laminar-turbulent transition location and thereby heat fluxes on hypersonic vehicles.
Author: Antoloy Alexandrovich Maslov
Publisher:
ISBN:
Category : Aerodynamics, Hypersonic
Languages : en
Pages : 69
Get Book Here
Book Description
The objective of this project is to basic research of stability and transition of hypersonic boundary layer around blunted cone. Next results is obtained: -experimental data on the position of the laminar-turbulent transition in the boundary layer of a cone with different nose bluntness for Mach 6; -experimental data on the characteristics of natural disturbances in the hypersonic boundary layer of a blunted cone for Mach 6; -experimental data on the evolution of artificial disturbances, excited in the hypersonic boundary layer on a blunted cone for Mach 6. Acquired experimental data could be used for validation of numerical techniques. Using of obtained data will help to more accurate prediction of laminar-turbulent transition location and thereby heat fluxes on hypersonic vehicles.
Author: Kenneth F. Stetson
Publisher:
ISBN:
Category : Aerodynamics, Hypersonic
Languages : en
Pages : 116
Get Book Here
Book Description
This is a survey paper on the subject of hypersonic boundary-layer transition. Part 1 discusses boundary-layer stability theory, hypersonic boundary-layer stability experiments, and a comparison between theory and experiment. Part 2 contains comments on how many configuration and flow parameters influence transition. Part 3 discusses some additional general aspects of transition. Part 4 discusses problems of predicting transition and comments on three prediction methods. Part 5 contains some general guidelines for prediction methodology. Keywords: Boundary layer transition, Boundary layer stability, Hypersonic boundary layers.
Author: Glen P. Doggett
Publisher:
ISBN:
Category :
Languages : en
Pages : 136
Get Book Here
Book Description
Author: Joseph W. Cleary
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages : 82
Get Book Here
Book Description
Author: Michael C. Fischer
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 76
Get Book Here
Book Description
Boundary layer transition on nose cones at hypersonic speeds.
Author: Christopher Haley
Publisher:
ISBN:
Category :
Languages : en
Pages : 194
Get Book Here
Book Description
Hypersonic boundary layer research has studied surface features, such as isolated or distributed roughness, extensively for turbulence tripping. However, there are reports of a counterintuitive phenomenon within the literature whereby surface roughness can delay the onset of laminar-turbulent transition. The reports did not attract widespread attention, leaving the phenomenon's underlying mechanism uninvestigated for several decades. A renewed interest in boundary layer control strategies motivated Fong and Zhong in 2012 to conduct an extensive numerical study on what has been termed the ``roughness effect''. The research found that roughness elements immersed within the boundary layer and placed at the synchronization location for a particular unstable frequency can attenuate higher unstable frequencies while amplifying lower unstable frequencies. Thus, providing a passive means to delay laminar-turbulent transition with discrete surface roughness. However, these previous numerical investigations are limited to a flat plate geometry, 2-D spanwise roughness, limited in the scope of their freestream Mach number, and focus exclusively on Mack's second mode instability. In order to advance our knowledge of the roughness effect, the objectives of this dissertation are fourfold: (1) To investigate the roughness effect on a straight blunt cone geometry, (2) To investigate the long-term downstream consequences of the roughness effect, (3) Provide experimental evidence of second mode attenuation in a flow with a growing boundary layer containing a range of unstable frequencies, and the consequences of off-design flow conditions, and (4) To investigate the appearance of the supersonic mode in a low-enthalpy warm wall flow of the current study. A combined approach of direct numerical simulation, body-fitted surface roughness, and linear stability theory are used to numerically investigate the roughness effect. Four cases are computed as part of the research objective. Case C.1 is a Mach 8 flow computed for the design of a passive transition-delaying roughness configuration, along with studying the roughness effect on a straight blunt cone. Case C.1-Ext is a longer cone simulation of C.1 and is computed to investigate the long-term downstream response of the roughness effect. C.2 is similar to C.1 except for a smaller nose radius and is computed for experimental validation. The last case, C.3, is a Mach 5 flow and is computed to study the roughness effect on a straight blunt cone in off-design flow conditions and for experimental validation. The first objective to investigate the roughness effect on a straight blunt cone advances the research from a flat plate to more realistic test article geometries. Much of the experimental work done in hypersonic boundary layer stability research is done on straight cones due to the axisymmetric flows in hypersonic wind tunnels. The investigation found that the roughness effect behaves like a flat plate where unstable frequencies higher than the synchronization frequency are attenuated, and lower frequencies are amplified. The investigation also found that some flow features around the roughness elements, such as separation zones, are either smaller in size or absent in conical flow fields. The investigation also confirmed that the second mode's attenuation is a result of the element's proximity to the synchronization location and not due to its proximity with the branch I/II neutral points. The long-term downstream effect of second mode attenuation is also investigated for a single roughness and roughness array. The numerical investigation found that the range of targeted frequencies is attenuated as expected, especially for the roughness array, which proves to be effective at attenuating unstable frequencies over a longer distance. However, the amplitudes of frequencies below the targeted range grow many times higher than they would have otherwise on a cone with no roughness. The passive transition-delaying control strategy, rather than dissipating the disturbance energy, acts to transfer the energy to lower unstable frequencies, guaranteeing eventual turbulent transition. The result demonstrates that roughness must be applied to the entire cone to have an effective control strategy. The experimental results in this dissertation come from a joint numerical and experimental investigation of transition-delaying roughness with Dr. Katya Casper at Sandia National Laboratories. A numerical simulation is undertaken to design a surface roughness array that would attenuate Mack's second mode instability and maintain laminar flow over a Mach 8 hypersonic blunt cone. Multiple experimental runs at the Mach 8 condition with different Reynolds numbers are performed, as well as an off-design Mach 5 condition. The roughness array successfully delays transition in the Mach 8 case as intended but does not delay transition in the Mach 5 case. For validation and further analysis, numerical cases C.2 and C.3 are computed using the Mach 8 and Mach 5 experimental flow conditions. Stability analysis of case C.2 shows that the roughness array is adequately designed to attenuate the second mode. Analysis of case C.3 reveals the Mach 5 boundary layer is dominated by Mack's first mode instability and is not attenuated by the array. This investigation of multiple flow conditions combined with experimental results helps validate the numerical code and provides empirical evidence for the roughness effect. While investigating transition delaying surface roughness, acoustic-like waves are observed emanating from the boundary layer of case C.1-Ext. The acoustic-like wave emissions are qualitatively similar to those attributed to the supersonic mode. However, the supersonic mode responsible for such emissions is often found in high-enthalpy flows with highly cooled walls, making its appearance in a flow with relatively low freestream enthalpy and a warm wall unexpected. Stability analysis on the steady-state solution reveals an unstable mode S with a subsonic phase velocity and a stable mode F whose mode F- branch takes on a supersonic phase velocity. The stable supersonic mode F is thought to be responsible for the acoustic-like wave emissions. Unsteady simulations are carried out using blowing-suction actuators at two different surface locations. Analysis of the temporal data and spectral data reveals constructive/destructive interference occurring between a primary and a satellite wave packet in the vicinity of the acoustic-like wave emissions, which has a damping effect on individual frequency growth. Based on this study's results, it is concluded that a supersonic discrete mode is not limited to high-enthalpy, cold wall flows and that it does appear in low-enthalpy, warm wall flows; however, the mode is stable.
Author: Eric J. Softley
Publisher:
ISBN:
Category : Aerodynamics, Hypersonic
Languages : en
Pages : 50
Get Book Here
Book Description
The document covers observations of transitions of the hypersonic boundary layer on a cone at M = 10. Transition independent of the unit Reynolds number was obtained. Blunt cone transition with a wide range of nose radii was examined. It was found possible to correlate transition on different blunt cones using a new bluntness parameter. (Author).
Author: National Aeronautics and Space Adm Nasa
Publisher:
ISBN: 9781731266217
Category :
Languages : en
Pages : 134
Get Book Here
Book Description
An experimental investigation of the effects of angle of attack on hypersonic boundary-layer stability on a flared-cone model was conducted in the low-disturbance Mach-6 Nozzle-Test Chamber Facility at NASA Langley Research Center. This unique facility provided a 'quiet' flow test environment which is well suited for stability experiments because the low levels of freestream 'noise' minimize artificial stimulation of flow-disturbance growth. Surface pressure and temperature measurements documented the adverse-pressure gradient and transition-onset location. Hot-wire anemometry diagnostics were applied to identify the instability mechanisms which lead to transition. In addition, the mean flow over the flared-cone geometry was modeled by laminar Navier-Stokes computations. Results show that the boundary layer becomes more stable on the windward ray and less stable on the leeward ray relative to the zero-degree angle-of-attack case. The second-mode instability dominates the transition process at a zero-degree angle of attack, however, on the windward ray at an angle of attack this mode was completely stabilized. The less-dominant first-mode instability was slightly destabilized on the windward ray. Non-linear mechanisms such as saturation and harmonic generation are identified from the flow-disturbance bispectra. Doggett, Glen P. and Chokani, Ndaona Langley Research Center ANGLE OF ATTACK; AERODYNAMIC NOISE; ZERO ANGLE OF ATTACK; BOUNDARY LAYER STABILITY; HYPERSONIC SPEED; NAVIER-STOKES EQUATION; HYPERSONICS; AERODYNAMIC STABILITY; HYPERSONIC BOUNDARY LAYER; WIND TUNNELS; VELOCITY MEASUREMENT; TEST CHAMBERS; LOW NOISE...
Author:
Publisher:
ISBN:
Category : Aerodynamics, Hypersonic
Languages : en
Pages : 52
Get Book Here
Book Description
Author: Ndaona Chokani
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
