Experimental study and thermal modeling of the constrained vapor bubble heat pipe operation in a convection-free environment under the influence of gravity PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Experimental study and thermal modeling of the constrained vapor bubble heat pipe operation in a convection-free environment under the influence of gravity PDF full book. Access full book title Experimental study and thermal modeling of the constrained vapor bubble heat pipe operation in a convection-free environment under the influence of gravity by Sumita Basu. Download full books in PDF and EPUB format.
Author: Sumita Basu
Publisher:
ISBN:
Category :
Languages : en
Pages : 185
Get Book Here
Book Description
Author: Sumita Basu
Publisher:
ISBN:
Category :
Languages : en
Pages : 185
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Dissertation abstracts
Languages : en
Pages : 776
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Dissertations, Academic
Languages : en
Pages : 756
Get Book Here
Book Description
Author: T. P. Cotter
Publisher:
ISBN:
Category : Heat pipes
Languages : en
Pages : 44
Get Book Here
Book Description
A heat pipe is a self-contained structure which achieves very high thermal conductance by means of two-phase fluid flow with capillary circulation. A quantitative engineering theory for the design and performance analysis of heat pipes is given.
Author: Akshay Kundan
Publisher:
ISBN:
Category :
Languages : en
Pages : 290
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 934
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 70
Get Book Here
Book Description
A combined experimental and analytical investigation was conducted in order to identify and better understand the phenomena which govern the performance limitations and operating characteristics of micro heat pipes - heat pipes so small that the mean curvature of the vapor-liquid interface is comparable in magnitude to the reciprocal of the hydraulic radius of the flow channel. The analytical portion of the investigation began by developing a steady-state model in which the effects of the extremely small characteristic dimensions on the conventional steady-state heat pipe modeling techniques were examined. To further understand the behavior of these types of devices, a transient analytical model was developed, which could be used to predict steady- state and transient behavior during start-up or variations in the evaporator thermal load. In the experimental portion of the investigation, two micro heat pipes, one copper and one silver, in cross-sectional area and in length, were evaluated experimentally to determine the accuracy of both the steady-state and transient model and to provide verification of the micro heat pipe concept. Tests were conducted in a vacuum environment to eliminate conduction and convection losses. (sdw).
Author: Arya Chatterjee
Publisher:
ISBN:
Category :
Languages : en
Pages : 436
Get Book Here
Book Description
Author: Peter D. Dunn
Publisher: Pergamon
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 352
Get Book Here
Book Description
Author: Kenneth Miguel Armijo
Publisher:
ISBN:
Category :
Languages : en
Pages : 202
Get Book Here
Book Description
This research investigates the impact of Marangoni phenomena, with low mixture concentrations of alcohol and water, to enhance thermal transport capability of gravity-assisted heat pipes. The use of binary mixture working fluids in gravity-assisted heat pipes are shown to improve the critical heat flux (CHF) and operating performance, more so than with pure fluids. The CHF is responsible for dryout when the pumping rate of a liquid flow structure is not sufficient to provide enough fluid to the evaporator section. In the first study, heat pipe performance experiments were conducted for pure water and 2-propanol solutions with varying concentrations. Initial tests with pure water determined the optimal working fluid charge for the heat pipe; subsequent performance tests over a wide range of heat input levels were then conducted for each working fluid at this optimum value. The results indicated that some mixtures significantly enhance the heat transfer coefficient and heat flux capability of the heat pipe evaporator. For the best mixture tested, the maximum evaporator heat flux carried by the coolant without dryout was found to be 52% higher than the value for the same heat pipe using pure water as a coolant under comparable conditions. Peak evaporator heat flux values above 100 W/cm2 were achieved with some mixtures. Evaporator and condenser heat transfer coefficient data are presented and the trends are examined in the context of the expected effect of the Marangoni mechanisms on heat transfer. Analytical modeling effort was also conducted investigating the impact of Marangoni phenomena for low concentrations of 2-propanol/water and methanol/water mixtures. In real systems the addition of small levels of surface-active contaminants can affect the surface tension of the liquid-vapor interface and thermodynamic conditions in this region. Analysis was performed for three widely accepted binary mixture correlations to predict heat flux and superheat values for subatmospheric experimental data using bulk fluid and film thermodynamic properties. Due to the non-ideal nature of these alcohol/water mixtures, this study employs an average pseudo single-component (PSC) coefficient in place of an ideal heat transfer coefficient (HTC) to improve the correlation predictions. This investigation evaluates the ability for these correlations to predict strong Marangoni effects of mixtures that have large surface tension variation with concentration under subatmospheric conditions. It is not always clear that evaluation of bulk fluid properties will satisfactorily account for Marangoni effects. Analysis is also performed to assess correlation predictions for interfacial film properties rather than that of the bulk fluid. The results indicate that the use of film properties along with the PSC coefficient improves heat flux model predictions of subatmospheric experimental data by as much as 59.3% for 0.015M 2-propanol and 49.1% for 0.04M methanol/water mixtures, where strong Marangoni effects are believed to be more evident. A second experimental study was also performed of a 37° inclined, gravity-assisted, brass heat pipe with a 0.05M 2-Propanol/water binary mixture. The device design was developed from the first study by enlarging the evaporator and condenser surface areas. Strip heaters were also employed to provide larger input heat flux levels, for enhanced heat pipe performance testing. These experiments were carried out for varying liquid charge ratios between 30% and 70%, to determine an optimal value that would enhance heat transport performance by maximizing the critical heat flux (CHF) condition, while reducing the evaporator wall superheat. A 45% fill ratio was found to have the lowest overall superheat and highest thermal conductance by as much as 7.5W/K, as well as an enhanced CHF condition of 114.8W/cm2. A heat pipe analytical model, that characterizes binary mixture pool boiling is also presented, which was developed based on modeling efforts presented in studies 1 and 2. Model results with a 45% liquid charge ratio were found to provide good correspondence with the experimental data with an average rms evaporator vaporization heat flux deviation of 6.5%. The final study of this investigation assesses the cooling of single and dual-junction solar cells with the inclined, gravity-assisted, brass heat pipe, with a 0.05M 2-propanol/water mixture. Thermal behavior of this heat pipe solar collector system was investigated theoretically and semi-empirically through experimentation of varying input heat loads from attached strip-heaters to simulate waste heat production of single-junction monocrystalline silicon (Si), and tandem multijunction GaInP/GaAs solar cells. It was also found that the 45% liquid charge was capable of achieving the lowest superheat levels and highest critical heat flux (CHF) condition of 114.8 W/cm2, at a predicted solar concentration of 162 suns. Solar cell semiconductor theory was employed to evaluate the effects of increasing temperature and solar concentration on solar cell performance. Results showed that a combined PV/heat pipe system had a 1.7% higher electrical efficiency, at a concentration ratio 132 suns higher than a stand-alone PV system. The dual-junction system also exhibited enhanced performance at elevated system temperatures with a 2.1% greater electrical efficiency, at an operational concentration level of 560 suns higher than a stand-alone PV system. Waste heat recovery analysis of the silicon solar cell, revealed respective thermal and system efficiencies as high as 56.3% and 66.3% as the incident solar radiation and corresponding condenser heat removal factor increased to 82 suns.
