Effectiveness of Noise Barriers Installed Adjacent to Transverse Grooved Concrete Pavement PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Effectiveness of Noise Barriers Installed Adjacent to Transverse Grooved Concrete Pavement PDF full book. Access full book title Effectiveness of Noise Barriers Installed Adjacent to Transverse Grooved Concrete Pavement by Lloyd Allen Herman. Download full books in PDF and EPUB format.
Author: Lloyd Allen Herman
Publisher:
ISBN:
Category : Noise barriers
Languages : en
Pages : 118
Get Book
Book Description
In recent years the Ohio Department of Transportation (ODOT) has reconstructed a number of roadways where asphalt pavements were replaced with random transverse grooved concrete pavements. Upon completion, residents living adjacent to the reconstructed roadways have complained of increased noise levels. The Federal Highway Administration (FHWA) Traffic Noise Model (TNM) is used to determine if predicted traffic noise levels warrant abatement and to design the abatement structures. The public perception problem described above suggests that the model does not result in adequate noise barrier abatement designs near random transverse grooved concrete pavements. The overall goal of this project was to provide ODOT with accurate TNM noise predictions when modeling random transverse grooved concrete pavement highways. Three random transverse grooved PCC roadway sites were chosen for study where high quality sound recordings were taken. Sites 1 (Cincinnati I-275) and 2 (Troy I-75) were chosen to represent the noise quality experienced by residents adjacent to the roadway, where the residential areas were separated from the roadway by sound barriers. Site 3 (Madison County I-70) was chosen to study the attenuation of road noise with distance in an easily-characterized environment; an open soybean cropland essentially level on both sides of the roadway with no noise barrier. Through a paired t-test the research findings determined that the sample means of the TNM average pavement and the ODOT random transverse grooved pavement were not equivalent based upon a level of confidence of 95 percent. An examination of the one-third octave band frequency levels indicated that at frequencies greater than 500 Hz, the measured traffic noise levels exceeded both the TNM average pavement type and TNM ODOT random transverse grooved pavement predictions. However, at frequencies less than 500 Hz the predictions tended to exceed the measurements. It is recommended that the experimental version of TNM developed for this project, using the current ODOT random transverse grooved concrete pavement REMEL, should not be used in practice due to its potential to under-predict traffic noise levels. A new surface texture specification should also be developed for concrete pavements to replace the current specification in order to reduce tire/pavement noise levels while maintaining or improving safety and durability characteristics.
Author: Lloyd Allen Herman
Publisher:
ISBN:
Category : Noise barriers
Languages : en
Pages : 118
Get Book
Book Description
In recent years the Ohio Department of Transportation (ODOT) has reconstructed a number of roadways where asphalt pavements were replaced with random transverse grooved concrete pavements. Upon completion, residents living adjacent to the reconstructed roadways have complained of increased noise levels. The Federal Highway Administration (FHWA) Traffic Noise Model (TNM) is used to determine if predicted traffic noise levels warrant abatement and to design the abatement structures. The public perception problem described above suggests that the model does not result in adequate noise barrier abatement designs near random transverse grooved concrete pavements. The overall goal of this project was to provide ODOT with accurate TNM noise predictions when modeling random transverse grooved concrete pavement highways. Three random transverse grooved PCC roadway sites were chosen for study where high quality sound recordings were taken. Sites 1 (Cincinnati I-275) and 2 (Troy I-75) were chosen to represent the noise quality experienced by residents adjacent to the roadway, where the residential areas were separated from the roadway by sound barriers. Site 3 (Madison County I-70) was chosen to study the attenuation of road noise with distance in an easily-characterized environment; an open soybean cropland essentially level on both sides of the roadway with no noise barrier. Through a paired t-test the research findings determined that the sample means of the TNM average pavement and the ODOT random transverse grooved pavement were not equivalent based upon a level of confidence of 95 percent. An examination of the one-third octave band frequency levels indicated that at frequencies greater than 500 Hz, the measured traffic noise levels exceeded both the TNM average pavement type and TNM ODOT random transverse grooved pavement predictions. However, at frequencies less than 500 Hz the predictions tended to exceed the measurements. It is recommended that the experimental version of TNM developed for this project, using the current ODOT random transverse grooved concrete pavement REMEL, should not be used in practice due to its potential to under-predict traffic noise levels. A new surface texture specification should also be developed for concrete pavements to replace the current specification in order to reduce tire/pavement noise levels while maintaining or improving safety and durability characteristics.
Author: Douglas Meegan
Publisher:
ISBN:
Category : Detectors
Languages : en
Pages : 152
Get Book
Book Description
This project involved the development of a cost-effective sensor for long-range wireless, autonomous traffic noise monitoring. The device is called the Smart Sensor For Autonomous noise Monitoring (SSAM). The SSAM system developed under this project includes ten prototype sensors that measure and report noise levels periodically (e.g., once per minute) to a prototype base station that may be located up to 1.2 miles away. The data reported by SSAM includes flat-weighted and A-weighted sound pressure levels as well as octave band measurements over the frequency range of 22 to 5657 Hz. The system performance is similar to a Type 1 microphone as demonstrated in laboratory calibration tests reported here. The SSAM system developed in this project has been used to measure highway noise barrier insertion loss. The low-cost design of SSAM as well as the ability to perform autonomous measurements provides a new cost-effective approach to noise monitoring.
Author: Paul R. Donavan
Publisher: Transportation Research Board
ISBN: 0309283507
Category : Technology & Engineering
Languages : en
Pages : 73
Get Book
Book Description
"TRB's National Cooperative Highway Research Program (NCHRP) Report 738: Evaluating Pavement Strategies and Barriers for Noise Mitigation presents a methodology for evaluating feasibility, reasonableness, effectiveness, acoustic longevity, and economic features of pavement strategies and barriers for noise mitigation. The methodology uses a life-cycle cost analysis to examine the economic features of mitigation alternatives, the FHWA Traffic Noise Model to integrate the noise reduction performance of pavements and barriers, and on-board sound intensity measurements as an input to the prediction model. The appendixes contained in the research agency's final report provide elaborations and detail on several aspects of the research. The appendixes are not included with the print version of the report, but are available online." --Publisher description.
Author: William Bowlby
Publisher: Transportation Research Board
ISBN: 9780309053099
Category : Technology & Engineering
Languages : en
Pages : 76
Get Book
Book Description
This synthesis will be of interest to highway environmental engineers, noise analysts, design engineers, maintenance personnel, planners, administrators, and others responsible for the design, selection, and maintenance of noise barriers or other traffic noise abatement policies. Information is provided on current state practice associated with noise abatement techniques and on the various products that are used. This synthesis describes the state of the art with respect to traffic noise abatement procedures, especially noise barriers. This report of the Transportation Research Board provides information on the design, construction and maintenance of both new (Type I) and retrofit ( Type II) noise barriers. The design elements that are addressed include materials, the selection process, service life, foundations, drainage, aesthetics, and safety. The construction section covers technical problems related to surface effects, durability, snow damage, and costs. Other noise abatement measures such as insulation and highway design alternatives are also addressed. The issue of public demand and availability funding is included, and recommendations are made to improve the situation.
Author: David G. Peshkin
Publisher: Transportation Research Board
ISBN: 0309128927
Category : Technology & Engineering
Languages : en
Pages : 62
Get Book
Book Description
TRB's second Strategic Highway Research Program (SHRP 2) Report S2-R26-RR-2: Guidelines for the Preservation of High-Traffic-Volume Roadways explores the state of the practice for preservation treatments on high- and low-volume asphalt and concrete roadways. The report also includes suggested guidelines on the application of preservation treatments on high-volume roadways.
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1278
Get Book
Book Description
Author: Ron Bridle
Publisher: Thomas Telford
ISBN: 9780727731975
Category : Technology & Engineering
Languages : en
Pages : 594
Get Book
Book Description
This volume presents detailed and comprehensive accounts of the construction of the motorway network, associated structures and who was involved. Each of the ten chapters focuses on a specific region of the UK, providing a background history of the area and its roads.
Author: National Academy of Engineering
Publisher: National Academies Press
ISBN: 0309156327
Category : Technology & Engineering
Languages : en
Pages : 210
Get Book
Book Description
Exposure to noise at home, at work, while traveling, and during leisure activities is a fact of life for all Americans. At times noise can be loud enough to damage hearing, and at lower levels it can disrupt normal living, affect sleep patterns, affect our ability to concentrate at work, interfere with outdoor recreational activities, and, in some cases, interfere with communications and even cause accidents. Clearly, exposure to excessive noise can affect our quality of life. As the population of the United States and, indeed, the world increases and developing countries become more industrialized, problems of noise are likely to become more pervasive and lower the quality of life for everyone. Efforts to manage noise exposures, to design quieter buildings, products, equipment, and transportation vehicles, and to provide a regulatory environment that facilitates adequate, cost-effective, sustainable noise controls require our immediate attention. Technology for a Quieter America looks at the most commonly identified sources of noise, how they are characterized, and efforts that have been made to reduce noise emissions and experiences. The book also reviews the standards and regulations that govern noise levels and the federal, state, and local agencies that regulate noise for the benefit, safety, and wellness of society at large. In addition, it presents the cost-benefit trade-offs between efforts to mitigate noise and the improvements they achieve, information sources available to the public on the dimensions of noise problems and their mitigation, and the need to educate professionals who can deal with these issues. Noise emissions are an issue in industry, in communities, in buildings, and during leisure activities. As such, Technology for a Quieter America will appeal to a wide range of stakeholders: the engineering community; the public; government at the federal, state, and local levels; private industry; labor unions; and nonprofit organizations. Implementation of the recommendations in Technology for a Quieter America will result in reduction of the noise levels to which Americans are exposed and will improve the ability of American industry to compete in world markets paying increasing attention to the noise emissions of products.
Author:
Publisher:
ISBN:
Category : Highway research
Languages : en
Pages : 66
Get Book
Book Description
Author: Wisconsin. Department of Transportation
Publisher:
ISBN:
Category : Highway planning
Languages : en
Pages : 64
Get Book
Book Description
This Report to Stakeholders reviews some of our transportation research efforts in Wisconsin during the past four years. A few of these studies are already complete and have made a significant impact on the way we do business. Many of the projects will be finished in the coming months. For all of us interested in Wisconsin's transportation future, the report provides an overview of these diverse and laudable investigations.
