Author: Sonia Modarres Razavi
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Magnesium and its alloys have been considered as alternatives to aluminum alloys and steels for structural applications in automotive and aerospace applications due to their superior specific strength and light-weight. However, they have hexagonal-close packed (hcp) structure, and thus have a small number of deformation systems resulting in low ductility and formability near room temperature, anisotropic thermo-mechanical response and strong deformation textures. The aim of this work is to investigate experimentally the effect of crystallographic texture generated during severe plastic deformation (SPD), on the subsequent formability and mechanical flow anisotropy in AZ31B Mg alloy. The proper control of grain size and texture through SPD is expected to result in better low temperature formability and better control of mechanical flow anisotropy. AZ31B Mg alloy has been successfully processed using equal channel angular extrusion (ECAE) following different processing routes, multiple passes, and different processing temperatures, in order to obtain samples with a wide variety of grain sizes, ranging from ~370 nm up to few microns, and crystallographic textures. Low temperature processing of the AZ31B Mg alloy was successful after initial high temperature processing. Smaller grain sizes were achieved using the temperature step-down method leading to incremental reduction in grain size at each ECAE pass. The temperature step-down method was utilized to develop hybrid ECAE routes to obtain specific crystallographic textures. Optimized hybrid ECAE routes were developed which resulted in a high strength/high ductility material with the average grain size of ~370 nm. The ECAE processed alloy showed a high tensile yield strength of ~380 MPa that has never been reported so far in AZ31 ingot metallurgy Mg alloys. The influence of grain size on the critical stress for the activation of individual deformation mechanisms was also investigated by systematically controlling the texture and grain size, and assuming the activation of mainly a single deformation mechanism through the careful selection of the loading direction on the processed samples. It was revealed that the Hall-Petch slope for the basal slip was much smaller than those of prismatic slip and tensile twinning.
Author: Talal al- Samman
Publisher: Cuvillier Verlag
ISBN: 3867276633
Category :
Languages : en
Pages : 23
Get Book Here
Book Description
Author: T. G. Nieh
Publisher: Cambridge University Press
ISBN: 9780521561051
Category : Technology & Engineering
Languages : en
Pages : 288
Get Book Here
Book Description
This book describes advances in the field of superplasticity, the ability of certain materials to undergo very large tensile strains. This phenomenon has increasing commercial applications, but also presents a fascinating scientific challenge in attempts to understand the physical mechanisms that underpin it. The authors emphasize the materials aspects of superplasticity. Beginning with a brief history of the phenomenon, they describe the two major types of superplasticity-- fine-structure and internal-stress superplasticity-- and discuss their operative mechanisms. They also present microstructural factors controlling the ductility and fracture in superplastic materials. Observations of superplasticity in metals (including aluminum, magnesium, iron, titanium and nickel), ceramics (including monoliths and composites), intermetallics (including iron, nickel, and titanium base), and laminates are thoroughly described. This is a valuable text for graduate students and researchers in materials science and engineering.
Author: Mihriban O Pekguleryuz
Publisher: Elsevier
ISBN: 0857097296
Category : Science
Languages : en
Pages : 381
Get Book Here
Book Description
Magnesium and magnesium alloys offer a wealth of valuable properties, making them of great interest for use across a wide range of fields. This has led to extensive research focused on understanding the properties of magnesium and how these can be controlled during processing. Fundamentals of magnesium alloy metallurgy presents an authoritative overview of all aspects of magnesium alloy metallurgy, including physical metallurgy, deformation, corrosion and applications.Beginning with an introduction to the primary production of magnesium, the book goes on to discuss physical metallurgy of magnesium and thermodynamic properties of magnesium alloys. Further chapters focus on understanding precipitation processes of magnesium alloys, alloying behaviour of magnesium, and alloy design. The formation, corrosion and surface finishing of magnesium and its alloys are reviewed, before Fundamentals of magnesium alloy metallurgy concludes by exploring applications across a range of fields. Aerospace, automotive and other structural applications of magnesium are considered, followed by magnesium-based metal matrix composites and the use of magnesium in medical applications.With its distinguished editors and international team of expert contributors, Fundamentals of magnesium alloy metallurgy is a comprehensive tool for all those involved in the production and application of magnesium and its alloys, including manufacturers, welders, heat-treatment and coating companies, engineers, metallurgists, researchers, designers and scientists working with these important materials. - Overviews all aspects of magnesium alloy metallurgy - Discusses physical metallurgy of magnesium and thermodynamic properties of magnesium alloys - Reviews the formation, corrosion and surface finishing of magnesium and its alloys
Author: Franz Roters
Publisher: John Wiley & Sons
ISBN: 3527642099
Category : Technology & Engineering
Languages : en
Pages : 188
Get Book Here
Book Description
Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Author: Karl U. Kainer
Publisher: John Wiley & Sons
ISBN: 3527606297
Category : Technology & Engineering
Languages : en
Pages : 1088
Get Book Here
Book Description
The need for light-weight materials, especially in the automobile industry, created renewed interest in innovative applications of magnesium materials. This demand has resulted in increased research and development activity in companies and research institutes in order to achieve an improved property profile and better choice of alloy systems. Here, development trends and application potential in different fields like the automotive industry and communication technology are discussed in an interdisciplinary framework.
Author: Suveen Mathaudhu
Publisher: Springer
ISBN: 3319480995
Category : Technology & Engineering
Languages : en
Pages : 609
Get Book Here
Book Description
This is a compilation of the best papers in the history of Magnesium Technology, a definitive annual reference in the field of magnesium production and related light metals technologies. The volume contains a strong topical mix of application and fundamental research articles on magnesium technology. Section titles: 1.Magnesium Technology History and Overview 2.Electrolytic and Thermal Primary Production 3.Melting, Refining, Recycling, and Life-Cycle Analysis 4.Casting and Solidification 5.Alloy and Microstructural Design 6.Wrought Processing 7.Modeling and Simulation 8.Joining 9.Corrosion, Surface Treatment, and Coating
Author: Majid H. Al Maharbi
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Hexagonal closed packed (hcp) materials, in contrast to cubic materials, possess several processing challenges due to their anisotropic structural response, the wide variety of deformation textures they exhibit, and limited ductility at room temperature. The aim of this work is to investigate, both experimentally and theoretically, the effect os severe plastic deformation, ultrafine grain sizes, crystallographic textures and number of phases on the flow stress anisotropy and tension compression asymmetry, and the mechanisms responsible for these phenomena in two hcp materials: AZ31B Mg alloy consisting of one phase and Zn-8wt.% Al that has an hcp matrix with a secondary facecentered cubic (fcc) phase. Mg and its alloys have high specific strength that can potentially meet the high demand for light weight structural materials and low fuelconsumption in transportation. Zn-Al alloys, on the other hand, can be potential substitutes for several ferrous and non-ferrous materials because of their good mechanical and tribological properties. Both alloys have been successfully processed using equal channel angular extrusion (ECAE) following different processing routes in order to produce samples with a wide variety of microstructures and crystallographic textures for revealing the relationship between microstructural parameters, crystallographic texture and resulting flow stress anisotropy at room temperature. For AZ31B Mg alloy, the texture evolution during ECAE following conventional and hybrid ECAE routes was successfully predicted using visco-plastic self-consistent (VPSC) crystal plasticity model. The flow stress anisotropy and tension-compression (T/C) asymmetry of the as received and processed samples at room temperature were measured and predicted using the same VPSC model coupled with a dislocation-based hardening scheme. The governing mechanisms behind these phenomena are revealed as functions of grains size and crystallographic texture. It was found that the variation in flow stress anisotropy and T/C asymmetry among samples can be explained based on the texture that is generated after each processing path. Therefore, it is possible to control the flow anisotropy and T/C asymmetry in this alloy and similar Mg alloys by controlling the processing route and number of passes, and the selection of processing conditions can be optimized using VPSC simulations. In Zn-8wt.% Al alloy, the hard phase size, morphology, and distribution were found to control the anisotropy in the flow strength and elongation to failure of the ECAE processed samples.
Author: Alan Luo
Publisher: Springer Nature
ISBN: 3030724328
Category : Technology & Engineering
Languages : en
Pages : 272
Get Book Here
Book Description
This collection from the 12th International Conference on Magnesium Alloys and Their Applications (Mg 2021)—the longest running conference dedicated to the development of magnesium alloys—covers the breadth of magnesium research and development, from primary production to applications to end-of-life management. Authors from academia, government, and industry discuss new developments in magnesium alloys and share valuable insights. Topics in this volume include but are not limited to the following: Primary production Alloy development Solidification and casting processes Forming and thermo-mechanical processing Other manufacturing process development (including joining and additive manufacturing) Corrosion and protection Modeling and simulation Structural, functional, biomedical, and energy applications Advanced characterization and fundamental theories Recycling and environmental issues
Author: L.L. Rokhlin
Publisher: CRC Press
ISBN: 1482265168
Category : Science
Languages : en
Pages : 256
Get Book Here
Book Description
Magnesium-based alloys containing rare-earth metals are important structural materials, as they combine low density with high-strength properties. This makes them particularly attractive for industry, especially in cases where the low weight of constructions is critical, as in aircraft and space apparatus construction. One of the remarkable feature
