Author: H. C. Bowen
Publisher:
ISBN:
Category : Nuclear fuel elements
Languages : en
Pages : 114
Book Description
Development of Corrosion-resistant Aluminum Alloys for High-temperature Water Service
Author: H. C. Bowen
Publisher:
ISBN:
Category : Nuclear fuel elements
Languages : en
Pages : 114
Book Description
Publisher:
ISBN:
Category : Nuclear fuel elements
Languages : en
Pages : 114
Book Description
Corrosion Behavior of Aluminum Alloys in High Temperature, Pressurized Water
Author: Alan B. Riedinger
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 62
Book Description
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 62
Book Description
Corrosion of Aluminium
Author: Christian Vargel
Publisher: Elsevier
ISBN: 0080472362
Category : Technology & Engineering
Languages : en
Pages : 659
Book Description
Corrosion of Aluminium highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium- an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc. - 600 bibliographic references provide a comprehensive guide to over 100 years of related study - Providing practical applications to the reader across many industries - Accessible to both the beginner and the expert
Publisher: Elsevier
ISBN: 0080472362
Category : Technology & Engineering
Languages : en
Pages : 659
Book Description
Corrosion of Aluminium highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium- an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc. - 600 bibliographic references provide a comprehensive guide to over 100 years of related study - Providing practical applications to the reader across many industries - Accessible to both the beginner and the expert
The Development of Aluminum - 6 Percent Magnesium Wrought Alloys for Elevated-Temperature Service in Water at Temperatures Up to 600 Degree F.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 45
Book Description
At the present time, 28 aluminum and 728 are used in applications in which river water attains temperatures as high as about 180 deg F. The 2S is aluminum of commercial purity, and the 72S is a high-purity aluminum-base alloy containing 1 per cent zinc. Both of these materials are relatively weak at room temperature as well as at elevated temperatures. The objective of the present work was the development of aluminum-base alloys which had higher load-carrying capacities at all temperatures up to 600 deg F. without an appreciable sacrifice in resistance to corrosion by water at elevated temperatures and also without an appreciable increase in thermal neutron cross-section value. Accordingly, the work was divided into two phases. The first dealt with the development of alloys having better load-carrying capacity, and the second was concerned with the effects of temperature on the corrosion resistance of the experimental and some commercial alloys in water. The first phase is described in Section I of the report, and the second in Section II of the report.
Publisher:
ISBN:
Category :
Languages : en
Pages : 45
Book Description
At the present time, 28 aluminum and 728 are used in applications in which river water attains temperatures as high as about 180 deg F. The 2S is aluminum of commercial purity, and the 72S is a high-purity aluminum-base alloy containing 1 per cent zinc. Both of these materials are relatively weak at room temperature as well as at elevated temperatures. The objective of the present work was the development of aluminum-base alloys which had higher load-carrying capacities at all temperatures up to 600 deg F. without an appreciable sacrifice in resistance to corrosion by water at elevated temperatures and also without an appreciable increase in thermal neutron cross-section value. Accordingly, the work was divided into two phases. The first dealt with the development of alloys having better load-carrying capacity, and the second was concerned with the effects of temperature on the corrosion resistance of the experimental and some commercial alloys in water. The first phase is described in Section I of the report, and the second in Section II of the report.
The Development of Aluminum-6 Per Cent Magnesium Wrought Alloys for Elevated-temperature Service and Their Resistance to Corrosion in Water at Temperatures Up to 6000F
Author: K. Grube
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 48
Book Description
At the present time, 28 aluminum and 728 are used in applications in which river water attains temperatures as high as about 180 deg F. The 2S is aluminum of commercial purity, and the 72S is a high-purity aluminum-base alloy containing 1 per cent zinc. Both of these materials are relatively weak at room temperature as well as at elevated temperatures. The objective of the present work was the development of aluminum-base alloys which had higher load-carrying capacities at all temperatures up to 600 deg F. without an appreciable sacrifice in resistance to corrosion by water at elevated temperatures and also without an appreciable increase in thermal neutron cross-section value. Accordingly, the work was divided into two phases. The first dealt with the development of alloys having better load-carrying capacity, and the second was concerned with the effects of temperature on the corrosion resistance of the experimental and some commercial alloys in water. The first phase is described in Section I of the report, and the second in Section II of the report.
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 48
Book Description
At the present time, 28 aluminum and 728 are used in applications in which river water attains temperatures as high as about 180 deg F. The 2S is aluminum of commercial purity, and the 72S is a high-purity aluminum-base alloy containing 1 per cent zinc. Both of these materials are relatively weak at room temperature as well as at elevated temperatures. The objective of the present work was the development of aluminum-base alloys which had higher load-carrying capacities at all temperatures up to 600 deg F. without an appreciable sacrifice in resistance to corrosion by water at elevated temperatures and also without an appreciable increase in thermal neutron cross-section value. Accordingly, the work was divided into two phases. The first dealt with the development of alloys having better load-carrying capacity, and the second was concerned with the effects of temperature on the corrosion resistance of the experimental and some commercial alloys in water. The first phase is described in Section I of the report, and the second in Section II of the report.
Nuclear Science Abstracts
Author:
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 1048
Book Description
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 1048
Book Description
The Development of Aluminum-6 Per Cent Magnesium Wrought Alloys for Elevated-temperature Service and Their Resistance to Corrosion in Water at Temperatures Up to 600°F
Author: K. Grube
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 44
Book Description
At the present time, 28 aluminum and 728 are used in applications in which river water attains temperatures as high as about 180 deg F. The 2S is aluminum of commercial purity, and the 72S is a high-purity aluminum-base alloy containing 1 per cent zinc. Both of these materials are relatively weak at room temperature as well as at elevated temperatures. The objective of the present work was the development of aluminum-base alloys which had higher load-carrying capacities at all temperatures up to 600 deg F. without an appreciable sacrifice in resistance to corrosion by water at elevated temperatures and also without an appreciable increase in thermal neutron cross-section value. Accordingly, the work was divided into two phases. The first dealt with the development of alloys having better load-carrying capacity, and the second was concerned with the effects of temperature on the corrosion resistance of the experimental and some commercial alloys in water. The first phase is described in Section I of the report, and the second in Section II of the report.
Publisher:
ISBN:
Category : Aluminum alloys
Languages : en
Pages : 44
Book Description
At the present time, 28 aluminum and 728 are used in applications in which river water attains temperatures as high as about 180 deg F. The 2S is aluminum of commercial purity, and the 72S is a high-purity aluminum-base alloy containing 1 per cent zinc. Both of these materials are relatively weak at room temperature as well as at elevated temperatures. The objective of the present work was the development of aluminum-base alloys which had higher load-carrying capacities at all temperatures up to 600 deg F. without an appreciable sacrifice in resistance to corrosion by water at elevated temperatures and also without an appreciable increase in thermal neutron cross-section value. Accordingly, the work was divided into two phases. The first dealt with the development of alloys having better load-carrying capacity, and the second was concerned with the effects of temperature on the corrosion resistance of the experimental and some commercial alloys in water. The first phase is described in Section I of the report, and the second in Section II of the report.
Reactor Materials
Author:
Publisher:
ISBN:
Category : Nuclear reactors
Languages : en
Pages : 304
Book Description
Publisher:
ISBN:
Category : Nuclear reactors
Languages : en
Pages : 304
Book Description
U.S. Government Research Reports
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 230
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 230
Book Description
Boiling Water Reactor Technology Status of the Art Report: Water chemistry and corrosion
Author:
Publisher:
ISBN:
Category : Boiling water reactors
Languages : en
Pages : 258
Book Description
Publisher:
ISBN:
Category : Boiling water reactors
Languages : en
Pages : 258
Book Description