Author: J. T. M. de Hosson
Publisher: WIT Press
ISBN: 184564073X
Category : Science
Languages : en
Pages : 353
Book Description
The importance of contact and surface problems in modern engineering and their combined effects has led to the Eighth International Conference on Computer Methods and Experimental Measurements for Surface and Contact Mechanics. Nowadays the importance of contact and surface problems in many technological fields is well understood: they are complex and inherently non-linear due to their moving boundaries and the different properties of materials, particularly along the contact surfaces. Structural components fail from wear, corrosion, high cycle fatigue etc., that is to say affected and initiated by the surface conditions. The use of surface treatments can reduce the cost of components and extend the life of the elements. Their effect is of particular importance in the case of surfaces undergoing contact, a problem which is addressed throughout the book. Topics featured: Surface Treatment; Surface problems in Contact Mechanics; Fracture Mechanics; Coupled analysis and experiments; Thin Coatings; Thick Coatings; Contact Mechanics; Material Surface in Contact; Applications and Case Studies.
Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII
Author: J. T. M. de Hosson
Publisher: WIT Press
ISBN: 184564073X
Category : Science
Languages : en
Pages : 353
Book Description
The importance of contact and surface problems in modern engineering and their combined effects has led to the Eighth International Conference on Computer Methods and Experimental Measurements for Surface and Contact Mechanics. Nowadays the importance of contact and surface problems in many technological fields is well understood: they are complex and inherently non-linear due to their moving boundaries and the different properties of materials, particularly along the contact surfaces. Structural components fail from wear, corrosion, high cycle fatigue etc., that is to say affected and initiated by the surface conditions. The use of surface treatments can reduce the cost of components and extend the life of the elements. Their effect is of particular importance in the case of surfaces undergoing contact, a problem which is addressed throughout the book. Topics featured: Surface Treatment; Surface problems in Contact Mechanics; Fracture Mechanics; Coupled analysis and experiments; Thin Coatings; Thick Coatings; Contact Mechanics; Material Surface in Contact; Applications and Case Studies.
Publisher: WIT Press
ISBN: 184564073X
Category : Science
Languages : en
Pages : 353
Book Description
The importance of contact and surface problems in modern engineering and their combined effects has led to the Eighth International Conference on Computer Methods and Experimental Measurements for Surface and Contact Mechanics. Nowadays the importance of contact and surface problems in many technological fields is well understood: they are complex and inherently non-linear due to their moving boundaries and the different properties of materials, particularly along the contact surfaces. Structural components fail from wear, corrosion, high cycle fatigue etc., that is to say affected and initiated by the surface conditions. The use of surface treatments can reduce the cost of components and extend the life of the elements. Their effect is of particular importance in the case of surfaces undergoing contact, a problem which is addressed throughout the book. Topics featured: Surface Treatment; Surface problems in Contact Mechanics; Fracture Mechanics; Coupled analysis and experiments; Thin Coatings; Thick Coatings; Contact Mechanics; Material Surface in Contact; Applications and Case Studies.
Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII
Author: J. T. M. de Hosson
Publisher: Computational Mechanics
ISBN: 9781845640224
Category : Science
Languages : en
Pages : 424
Book Description
The research activities in the field of surface engineering have been greatly driven by the realization that the surface is usually the most important part of any engineering component. The scientific research featured deals with fundamental and applied concepts of surface engineering, in particular focusing on the interplay between applied physics, materials science and engineering, computational mechanics and mechanical engineering. The book is devoted to fundamental and applied studies of four interconnected aspects: processing, microstructural features, functional performance as well as the design of an appropriate theoretical and predictive framework of protective surfaces.
Publisher: Computational Mechanics
ISBN: 9781845640224
Category : Science
Languages : en
Pages : 424
Book Description
The research activities in the field of surface engineering have been greatly driven by the realization that the surface is usually the most important part of any engineering component. The scientific research featured deals with fundamental and applied concepts of surface engineering, in particular focusing on the interplay between applied physics, materials science and engineering, computational mechanics and mechanical engineering. The book is devoted to fundamental and applied studies of four interconnected aspects: processing, microstructural features, functional performance as well as the design of an appropriate theoretical and predictive framework of protective surfaces.
Computational Methods and Experiments in Materials Characterization III
Author: C. A. Brebbia
Publisher: WIT Press
ISBN: 1845640802
Category : Technology & Engineering
Languages : en
Pages : 465
Book Description
Until recently, engineering materials could be characterized successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many: optimization, investigation of failure, simulation of production processes, to name but a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book publishes papers presented at the Third International Conference on Computational Methods and Experiments in Material Characterisation.Topics covered include: Composites; Ceramics; Alloys; Cements and Cement Based Materials; Biomaterials; Thin Films and Coatings; Advanced Materials; Imaging Analysis; Thermal Analysis; New Methods; Surface Chemistry, Nano Indentation; Continuum Methods; Particle Models; Damage Mechanics; Innovative Techniques; Stochastic Methods.
Publisher: WIT Press
ISBN: 1845640802
Category : Technology & Engineering
Languages : en
Pages : 465
Book Description
Until recently, engineering materials could be characterized successfully using relatively simple testing procedures. As materials technology advances, interest is growing in materials possessing complex meso-, micro- and nano-structures, which to a large extent determine their physical properties and behaviour. The purposes of materials modelling are many: optimization, investigation of failure, simulation of production processes, to name but a few. Modelling and characterisation are closely intertwined, increasingly so as the complexity of the material increases. Characterisation, in essence, is the connection between the abstract material model and the real-world behaviour of the material in question. Characterisation of complex materials therefore may require a combination of experimental techniques and computation. This book publishes papers presented at the Third International Conference on Computational Methods and Experiments in Material Characterisation.Topics covered include: Composites; Ceramics; Alloys; Cements and Cement Based Materials; Biomaterials; Thin Films and Coatings; Advanced Materials; Imaging Analysis; Thermal Analysis; New Methods; Surface Chemistry, Nano Indentation; Continuum Methods; Particle Models; Damage Mechanics; Innovative Techniques; Stochastic Methods.
Simulation of Electrochemical Processes II
Author: V.G. DeGiorgi
Publisher: WIT Press
ISBN: 1845640713
Category : Technology & Engineering
Languages : en
Pages : 369
Book Description
This book contains papers presented at the Second International Conference in this successful series, which presents and discusses the state-of-the-art on the computer simulation of corrosion, electrochemical processes and the electrical and electromagnetic fields associated with them.Modern industry applies a wide range of electrochemical processes to protect against corrosion, provide surface treatments and to manufacture products. This book focuses on the computer modelling of these industrial processes and techniques by examining the developments of computational models and their application in practice.Featured topics include: Cathodic Protection Systems; Modelling Methodologies; Electrodeposition and Electroforming; Modelling of Coatings; Modelling Stress Corrosion, Cracking and Corrosion Fatigue; Modelling and Corrosion of Surface Coatings; Interference and Signature Control; Anodic Protection; Electrocoating and Plating; Optimisation of Control Systems; Detection and Monitoring of Corrosion; Measurement Techniques; Fuel on Photovoltaic Cells; Electrolysis Reactors; Comparison of Experimental Measurements and Computer results, Case Studies.
Publisher: WIT Press
ISBN: 1845640713
Category : Technology & Engineering
Languages : en
Pages : 369
Book Description
This book contains papers presented at the Second International Conference in this successful series, which presents and discusses the state-of-the-art on the computer simulation of corrosion, electrochemical processes and the electrical and electromagnetic fields associated with them.Modern industry applies a wide range of electrochemical processes to protect against corrosion, provide surface treatments and to manufacture products. This book focuses on the computer modelling of these industrial processes and techniques by examining the developments of computational models and their application in practice.Featured topics include: Cathodic Protection Systems; Modelling Methodologies; Electrodeposition and Electroforming; Modelling of Coatings; Modelling Stress Corrosion, Cracking and Corrosion Fatigue; Modelling and Corrosion of Surface Coatings; Interference and Signature Control; Anodic Protection; Electrocoating and Plating; Optimisation of Control Systems; Detection and Monitoring of Corrosion; Measurement Techniques; Fuel on Photovoltaic Cells; Electrolysis Reactors; Comparison of Experimental Measurements and Computer results, Case Studies.
Abrasive Technology: Current Development And Applications I - Proceedings Of The Third International Conference On Abrasive Technology (Abtec '99)
Author: William J Scott
Publisher: World Scientific
ISBN: 9814493899
Category : Technology & Engineering
Languages : en
Pages : 558
Book Description
Abrasive technology is becoming increasingly important in precision manufacturing. This volume contains more than 70 refereed technical papers contributed by worldwide academic researchers and industrial practitioners, on the latest development in abrasive technology. Specifically, it covers the mechanics and mechanisms of abrasive processes as well as the technologies and applications related to abrasive jet machining, nano-machining, grinding, polishing, horning and lapping. It also includes topics on high-speed machining, eco-machining and laser micro-machining technologies. The discussion on the practical applications of abrasive technology and the associated theories makes this book useful for academic researchers and industrial practitioners.
Publisher: World Scientific
ISBN: 9814493899
Category : Technology & Engineering
Languages : en
Pages : 558
Book Description
Abrasive technology is becoming increasingly important in precision manufacturing. This volume contains more than 70 refereed technical papers contributed by worldwide academic researchers and industrial practitioners, on the latest development in abrasive technology. Specifically, it covers the mechanics and mechanisms of abrasive processes as well as the technologies and applications related to abrasive jet machining, nano-machining, grinding, polishing, horning and lapping. It also includes topics on high-speed machining, eco-machining and laser micro-machining technologies. The discussion on the practical applications of abrasive technology and the associated theories makes this book useful for academic researchers and industrial practitioners.
Applied Mechanics Reviews
Author:
Publisher:
ISBN:
Category : Mechanics, Applied
Languages : en
Pages : 700
Book Description
Publisher:
ISBN:
Category : Mechanics, Applied
Languages : en
Pages : 700
Book Description
Advances in Laser Materials Processing
Author: Jonathan R. Lawrence
Publisher: Elsevier
ISBN: 1845699815
Category : Technology & Engineering
Languages : en
Pages : 865
Book Description
Because of its capacity for continuous development and flexibility of use, the laser has become a mainstream manufacturing tool in many industrial sectors. This timely book relays the state-of-the-art in laser materials processing technology and applications and likely advances to be made from current research taking place around the world. The book also promotes appreciation for laser applications in a variety of industrial sectors.After two introductory chapters, the book reviews the main areas of laser processing. Starting with laser cutting and machining, the book discusses laser welding, annealing and hardening. It then considers surface treatment, coating and materials deposition as well as other engineering techniques such as peening and net-shape engineering, before discussing laser micro and nano-fabrication techniques. The book concludes by looking at modelling and process control.With its distinguished editorial team and contributions from renowned researchers working in every corner of the globe, Advances in laser materials processing provides a comprehensive yet detailed coverage of the many topics that comprise the field of laser materials processing. It provides a reference source for the scientists and engineers in such areas as metals processing and microelectronics, as well those conducting laser materials processing research in either academia or industry. - A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines - Explores the challenges, potential and future directions through the continuous development of new, application-specific lasers in materials processing - Discusses coatings and material deposition with lasers with including the production of coatings by laser-assisted processes, laser direct metal deposition and laser induced forward transfer (LIFT)
Publisher: Elsevier
ISBN: 1845699815
Category : Technology & Engineering
Languages : en
Pages : 865
Book Description
Because of its capacity for continuous development and flexibility of use, the laser has become a mainstream manufacturing tool in many industrial sectors. This timely book relays the state-of-the-art in laser materials processing technology and applications and likely advances to be made from current research taking place around the world. The book also promotes appreciation for laser applications in a variety of industrial sectors.After two introductory chapters, the book reviews the main areas of laser processing. Starting with laser cutting and machining, the book discusses laser welding, annealing and hardening. It then considers surface treatment, coating and materials deposition as well as other engineering techniques such as peening and net-shape engineering, before discussing laser micro and nano-fabrication techniques. The book concludes by looking at modelling and process control.With its distinguished editorial team and contributions from renowned researchers working in every corner of the globe, Advances in laser materials processing provides a comprehensive yet detailed coverage of the many topics that comprise the field of laser materials processing. It provides a reference source for the scientists and engineers in such areas as metals processing and microelectronics, as well those conducting laser materials processing research in either academia or industry. - A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines - Explores the challenges, potential and future directions through the continuous development of new, application-specific lasers in materials processing - Discusses coatings and material deposition with lasers with including the production of coatings by laser-assisted processes, laser direct metal deposition and laser induced forward transfer (LIFT)
Directory of Published Proceedings
Author:
Publisher:
ISBN:
Category : Engineering
Languages : en
Pages : 166
Book Description
Publisher:
ISBN:
Category : Engineering
Languages : en
Pages : 166
Book Description
The British National Bibliography
Author: Arthur James Wells
Publisher:
ISBN:
Category : Bibliography, National
Languages : en
Pages : 1922
Book Description
Publisher:
ISBN:
Category : Bibliography, National
Languages : en
Pages : 1922
Book Description
Multi-body Dynamic Modeling of Multi-legged Robots
Author: Abhijit Mahapatra
Publisher: Springer Nature
ISBN: 9811529531
Category : Computers
Languages : en
Pages : 230
Book Description
This book describes the development of an integrated approach for generating the path and gait of realistic hexapod robotic systems. It discusses in detail locomation with straight-ahead, crab and turning motion capabilities in varying terrains, like sloping surfaces, staircases, and various user-defined rough terrains. It also presents computer simulations and validation using Virtual Prototyping (VP) tools and real-world experiments. The book also explores improving solutions by applying the developed nonlinear, constrained inverse dynamics model of the system formulated as a coupled dynamical problem based on the Newton–Euler (NE) approach and taking into account realistic environmental conditions. The approach is developed on the basis of rigid multi-body modelling and the concept that there is no change in the configuration of the system in the short time span of collisions.
Publisher: Springer Nature
ISBN: 9811529531
Category : Computers
Languages : en
Pages : 230
Book Description
This book describes the development of an integrated approach for generating the path and gait of realistic hexapod robotic systems. It discusses in detail locomation with straight-ahead, crab and turning motion capabilities in varying terrains, like sloping surfaces, staircases, and various user-defined rough terrains. It also presents computer simulations and validation using Virtual Prototyping (VP) tools and real-world experiments. The book also explores improving solutions by applying the developed nonlinear, constrained inverse dynamics model of the system formulated as a coupled dynamical problem based on the Newton–Euler (NE) approach and taking into account realistic environmental conditions. The approach is developed on the basis of rigid multi-body modelling and the concept that there is no change in the configuration of the system in the short time span of collisions.