Asphalt Materials Characterization in Support of Implementation of the Proposed Mechanistic-empirical Pavement Design Guide PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Asphalt Materials Characterization in Support of Implementation of the Proposed Mechanistic-empirical Pavement Design Guide PDF full book. Access full book title Asphalt Materials Characterization in Support of Implementation of the Proposed Mechanistic-empirical Pavement Design Guide by . Download full books in PDF and EPUB format.
Author:
Publisher:
ISBN:
Category : Pavements, Asphalt concrete
Languages : en
Pages : 45
Get Book Here
Book Description
The proposed Mechanistic-Empirical Pavement Design Guide (MEPDG) procedure is an improved methodology for pavement design and evaluation of paving materials. Since this new procedure depends heavily on the characterization of the fundamental engineering properties of paving materials, a thorough material characterization of mixes used in Virginia is needed to use the MEPDG to design new and rehabilitated flexible pavements. The primary objective of this project was to perform a full hot-mix asphalt (HMA) characterization in accordance with the procedure established by the proposed MEPDG to support its implementation in Virginia. This objective was achieved by testing a sample of surface, intermediate, and base mixes. The project examined the dynamic modulus, the main HMA material property required by the MEPDG, as well as creep compliance and tensile strength, which are needed to predict thermal cracking. In addition, resilient modulus tests, which are not required by the MEPDG, were also performed on the different mixes to investigate possible correlations between this test and the dynamic modulus. Loose samples for 11 mixes (4 base, 4 intermediate, and 3 surface mixes) were collected from different plants across Virginia. Representative samples underwent testing for maximum theoretical specific gravity, asphalt content using the ignition oven method, and gradation of the reclaimed aggregate. Specimens for the various tests were then prepared using the Superpave gyratory compactor with a target voids in total mix (VTM) of 7% ± 1% (after coring and/or cutting). The investigation confirmed that the dynamic modulus test is an effective test for determining the mechanical behavior of HMA at different temperatures and loading frequencies. The test results showed that the dynamic modulus is sensitive to the mix constituents (aggregate type, asphalt content, percentage of recycled asphalt pavement, etc.) and that even mixes of the same type (SM-9.5A, IM-19.0A, and BM 25.0) had different measured dynamic modulus values because they had different constituents. The level 2 dynamic modulus prediction equation reasonably estimated the measured dynamic modulus; however, it did not capture some of the differences between the mixes captured by the measured data. Unfortunately, the indirect tension strength and creep tests needed for the low-temperature cracking model did not produce very repeatable results; this could be due to the type of extensometers used for the test. Based on the results of the investigation, it is recommended that the Virginia Department of Transportation use level 1 input data to characterize the dynamic modulus of the HMA for projects of significant impact. The dynamic modulus test is easy to perform and gives a full characterization of the asphalt mixture. Level 2 data (based on the default prediction equation) could be used for smaller projects pending further investigation of the revised prediction equation incorporated in the new MEPDG software/guide. In addition, a sensitivity analysis is recommended to quantify the effect of changing the dynamic modulus on the asphalt pavement design. Since low-temperature cracking is not a widespread problem in Virginia, use of level 2 or 3 indirect tensile creep and strength data is recommended at this stage.
Author:
Publisher:
ISBN:
Category : Pavements, Asphalt concrete
Languages : en
Pages : 45
Get Book Here
Book Description
The proposed Mechanistic-Empirical Pavement Design Guide (MEPDG) procedure is an improved methodology for pavement design and evaluation of paving materials. Since this new procedure depends heavily on the characterization of the fundamental engineering properties of paving materials, a thorough material characterization of mixes used in Virginia is needed to use the MEPDG to design new and rehabilitated flexible pavements. The primary objective of this project was to perform a full hot-mix asphalt (HMA) characterization in accordance with the procedure established by the proposed MEPDG to support its implementation in Virginia. This objective was achieved by testing a sample of surface, intermediate, and base mixes. The project examined the dynamic modulus, the main HMA material property required by the MEPDG, as well as creep compliance and tensile strength, which are needed to predict thermal cracking. In addition, resilient modulus tests, which are not required by the MEPDG, were also performed on the different mixes to investigate possible correlations between this test and the dynamic modulus. Loose samples for 11 mixes (4 base, 4 intermediate, and 3 surface mixes) were collected from different plants across Virginia. Representative samples underwent testing for maximum theoretical specific gravity, asphalt content using the ignition oven method, and gradation of the reclaimed aggregate. Specimens for the various tests were then prepared using the Superpave gyratory compactor with a target voids in total mix (VTM) of 7% ± 1% (after coring and/or cutting). The investigation confirmed that the dynamic modulus test is an effective test for determining the mechanical behavior of HMA at different temperatures and loading frequencies. The test results showed that the dynamic modulus is sensitive to the mix constituents (aggregate type, asphalt content, percentage of recycled asphalt pavement, etc.) and that even mixes of the same type (SM-9.5A, IM-19.0A, and BM 25.0) had different measured dynamic modulus values because they had different constituents. The level 2 dynamic modulus prediction equation reasonably estimated the measured dynamic modulus; however, it did not capture some of the differences between the mixes captured by the measured data. Unfortunately, the indirect tension strength and creep tests needed for the low-temperature cracking model did not produce very repeatable results; this could be due to the type of extensometers used for the test. Based on the results of the investigation, it is recommended that the Virginia Department of Transportation use level 1 input data to characterize the dynamic modulus of the HMA for projects of significant impact. The dynamic modulus test is easy to perform and gives a full characterization of the asphalt mixture. Level 2 data (based on the default prediction equation) could be used for smaller projects pending further investigation of the revised prediction equation incorporated in the new MEPDG software/guide. In addition, a sensitivity analysis is recommended to quantify the effect of changing the dynamic modulus on the asphalt pavement design. Since low-temperature cracking is not a widespread problem in Virginia, use of level 2 or 3 indirect tensile creep and strength data is recommended at this stage.
Author: Stacey D. Diefenderfer
Publisher:
ISBN:
Category : Binders (Materials)
Languages : en
Pages : 44
Get Book Here
Book Description
The Guide for Mechanistic-Empirical Design of New and Rehabilitated Pavement Structures (MEPDG) is an improved methodology for pavement design and the evaluation of paving materials. The Virginia Department of Transportation (VDOT) is expecting to transition to using the MEPDG methodology in the near future. The purpose of this research was to support this implementation effort. A catalog of mixture properties from 11 asphalt mixtures (3 surface mixtures, 4 intermediate mixtures, and 4 base mixtures) was compiled along with the associated asphalt binder properties to provide input values. The predicted fatigue and rutting distresses were used to evaluate the sensitivity of the MEPDG software to differences in the mixture properties and to assess the future needs for implementation of the MEPDG. Two pavement sections were modeled: one on a primary roadway and one on an interstate roadway. The MEPDG was used with the default calibration factors. Pavement distress data were compiled for the interstate and primary route corresponding to the modeled sections and were compared to the MEPDG-predicted distresses. Predicted distress quantities for fatigue cracking and rutting were compared to the calculated distress model predictive errors to determine if there were significant differences between material property input levels. There were differences between all rutting and fatigue predictions using Level 1, 2, and 3 asphalt material inputs, although not statistically significant. Various combinations of Level 3 inputs showed expected trends in rutting predictions when increased binder grades were used, but the differences were not statistically significant when the calibration model error was considered. Pavement condition data indicated that fatigue distress predictions were approximately comparable to the pavement condition data for the interstate pavement structure, but fatigue was over-predicted for the primary route structure. Fatigue model predictive errors were greater than the distress predictions for all predictions. Based on the findings of this study, further refinement or calibration of the predictive models is necessary before the benefits associated with their use can be realized. A local calibration process should be performed to provide calibration and verification of the predictive models so that they may accurately predict the conditions of Virginia roadways. Until then, implementation using Level 3 inputs is recommended. If the models are modified, additional evaluation will be necessary to determine if the other recommendations of this study are impacted. Further studies should be performed using Level 1 and Level 2 input properties of additional asphalt mixtures to validate the trends seen in the Level 3 input predictions and isolate the effects of binder grade changes on the predicted distresses. Further, additional asphalt mixture and binder properties should be collected to populate fully a catalog for VDOT's future implementation use. The implementation of these recommendations and use of the MEPDG are expected to provide VDOT with a more efficient and effective means for pavement design and analysis. The use of optimal pavement designs will provide economic benefits in terms of initial construction and lifetime maintenance costs.
Author: American Association of State Highway and Transportation Officials
Publisher: AASHTO
ISBN: 156051423X
Category : Pavements
Languages : en
Pages : 218
Get Book Here
Book Description
Author: Eugene L. Skok
Publisher: DEStech Publications, Inc
ISBN: 1605950688
Category : Science
Languages : en
Pages : 801
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 126
Get Book Here
Book Description
Highway agencies across the nation are moving towards implementation of the new AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG) for pavement design. The benefits of implementing the MEPDG for routine use in Ohio includes (1) achieving more cost effective and reliable pavement designs, (2) lower initial and life cycle costs to the agency, and (3) reduced highway user impact due to lane closures for maintenance and rehabilitation of pavements. Implementation of the MEPDG is a process that requires time and agency resources (staffing, training, testing facilities including equipment, and so on). A key requirement is validating the MEPDG's nationally calibrated pavement distress and smoothness prediction models when applied under Ohio conditions and performing local calibration if needed. Feasibility of using the MEPDG's national models in Ohio was investigated under this study using data from a limited number of LTPP projects located in Ohio. Results based on limited data showed inadequate goodness of fit and significant bias in a number of the MEPDG new HMA pavement and JPCP performance prediction models. Limited recalibration of these models showed promising results indicating that a full-scale recalibration effort using a more extensive database assembled from projects located throughout the state is feasible.
Author: Jeyakaran Thavathurairaja
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
Author: Sandra Erkens
Publisher: CRC Press
ISBN: 1317285522
Category : Technology & Engineering
Languages : en
Pages : 212
Get Book Here
Book Description
Functional Pavement Design is a collections of 186 papers from 27 different countries, which were presented at the 4th Chinese-European Workshops (CEW) on Functional Pavement Design (Delft, the Netherlands, 29 June-1 July 2016). The focus of the CEW series is on field tests, laboratory test methods and advanced analysis techniques, and cover analysis, material development and production, experimental characterization, design and construction of pavements. The main areas covered by the book include: - Flexible pavements - Pavement and bitumen - Pavement performance and LCCA - Pavement structures - Pavements and environment - Pavements and innovation - Rigid pavements - Safety - Traffic engineering Functional Pavement Design is for contributing to the establishment of a new generation of pavement design methodologies in which rational mechanics principles, advanced constitutive models and advanced material characterization techniques shall constitute the backbone of the design process. The book will be much of interest to professionals and academics in pavement engineering and related disciplines.
Author: Todd E. Hoerner
Publisher:
ISBN:
Category : Pavements
Languages : en
Pages : 324
Get Book Here
Book Description
As AASH is expected to eventually adopt the MEPDG at its primary pavement design method, it is critical that the SDDOT become familiar with the MEPGD documentation and associated design software. The research conducted under this project was a first step toward achieving this goal.
Author: Alex K. Apeagyei
Publisher:
ISBN:
Category : Binders (Materials)
Languages : en
Pages : 79
Get Book Here
Book Description
The Guide for the Mechanistic-Empirical Design of New & Rehabilitated Pavement Structures (MEPDG), developed under NCHRP Project 1-37A and recently adopted by the American Association of State Highway and Transportation Officials (AASHTO), offers an improved methodology for pavement design and evaluation. To achieve this improved prediction capability, the MEPDG procedure requires fundamental material properties in addition to certain empirically determined binder and mixture properties as design inputs. One of the key tasks identified by the Virginia Department of Transportation's (VDOT) Asphalt Concrete MEPDG Committee was the laboratory characterization of asphalt mixtures commonly used in Virginia to generate a catalog of the MEPDG-required design inputs. The purpose of this study was to evaluate, compile, and present asphalt material properties in a format that could be readily used in the MEPDG software and to develop a comprehensive catalog of MEPDG design input parameters for pavement design in Virginia. To achieve this objective, 18 asphalt concrete mixtures, sampled from seven of the nine VDOT districts, were tested using a battery of MEPDG-required tests including dynamic modulus (E*), flow number (FN), creep compliance, tensile strength, and beam fatigue tests. Testing involving binder and volumetric properties of the mixtures was also conducted. Finally, rut tests using the asphalt pavement analyzer (APA), a standard VDOT test protocol, were conducted to enable a direct comparison of the APA and FN test results. On the basis of these tests, suggestions for additional studies were made. The results of the study were presented in a form matching the MEPDG input format, and a catalog of design input parameters was developed for the 18 asphalt concrete mixtures. Included in the catalog were binder stiffness, mixture E*, mixture gradation, and mixture volumetric properties that would enable a designer the flexibility to select the desired input level (1, 2, or 3) depending on the pavement type. An illustrative example of how the developed inputs could be implemented using the MEPDG software was also provided. The results showed that E* master curves of asphalt mixtures obtained using the five standard testing temperatures described in AASHTO TP 62 could be obtained by testing at only three temperatures, which could result in a substantial reduction of testing time. The results also showed that the FN test was a sensitive test for evaluating rutting susceptibility of asphalt mixtures in the laboratory. The FN test was found to be sensitive to binder stiffness, mixture stiffness, mixture volumetric properties, aggregate gradation, and amount of recycled asphalt pavement (RAP) for the mixtures considered in this study. The study recommends that the catalog of input data for typical asphalt mixtures developed in this study be considered for pavement design in Virginia. The data followed expected trends and compared quite well with those reported in previous studies. Further studies should be conducted to evaluate the FN test as an additional tool for evaluating rutting in asphalt mixtures. Mixtures containing higher amounts of RAP (>20%) exhibited comparatively lower rutting resistance than those with 20% or less RAP. This phenomenon was unexpected since it is generally believed that adding more RAP should result in stiffer and hence more rut-resistant mixtures. Additional research should be conducted to investigate this phenomenon further.
Author: American Association of State Highway and Transportation Officials
Publisher: AASHTO
ISBN: 1560510552
Category : Pavements
Languages : en
Pages : 622
Get Book Here
Book Description
Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.
