Author: J. Paul Guyer
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 47
Book Description
Introductory technical guidance for professional engineers and professional land surveyors interested in survey markers and monuments. Here is what is discussed: 1. INTRODUCTION, 2. SITE SELECTION, 3. HORIZONTAL AND VERTICAL CONTROL MONUMENTS.
An Introduction to Survey Markers and Monuments for Professional Engineers
Author: J. Paul Guyer
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 47
Book Description
Introductory technical guidance for professional engineers and professional land surveyors interested in survey markers and monuments. Here is what is discussed: 1. INTRODUCTION, 2. SITE SELECTION, 3. HORIZONTAL AND VERTICAL CONTROL MONUMENTS.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 47
Book Description
Introductory technical guidance for professional engineers and professional land surveyors interested in survey markers and monuments. Here is what is discussed: 1. INTRODUCTION, 2. SITE SELECTION, 3. HORIZONTAL AND VERTICAL CONTROL MONUMENTS.
An Introduction to Land Surveying for Professional Engineers
Author: J. Paul Guyer, P.E., R.A.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 332
Book Description
Introductory technical guidance for professional engineers and construction managers interested in land surveying. Here is what is discussed: 1. TOPOGRAPHIC SURVEYS OVERVIEW, 2. SURVEY METHODS AND TECHNIQUES, 3. SURVEY CONTROL MONUMENTS, 4. FIELD DATA COLLECTORS AND COORDINATE GEOMETRY, 5. HORIZONTAL CONTROL SURVEY TECHNIQUES, 6. VERTICAL CONTROL SURVEY TECHNIQUES, 7. ACCURACY STANDARDS FOR LAND SURVEYS, 8. GEODETIC REFERENCE SYSTEMS, 9. PLANNING AND CONDUCTING CONTROL AND TOPOGRAPHIC SURVEYS.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 332
Book Description
Introductory technical guidance for professional engineers and construction managers interested in land surveying. Here is what is discussed: 1. TOPOGRAPHIC SURVEYS OVERVIEW, 2. SURVEY METHODS AND TECHNIQUES, 3. SURVEY CONTROL MONUMENTS, 4. FIELD DATA COLLECTORS AND COORDINATE GEOMETRY, 5. HORIZONTAL CONTROL SURVEY TECHNIQUES, 6. VERTICAL CONTROL SURVEY TECHNIQUES, 7. ACCURACY STANDARDS FOR LAND SURVEYS, 8. GEODETIC REFERENCE SYSTEMS, 9. PLANNING AND CONDUCTING CONTROL AND TOPOGRAPHIC SURVEYS.
An Introduction to Reservoir Sedimentation for Professional Engineers
Author: J. Paul Guyer, P.E., R.A.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 44
Book Description
Introductory technical guidance for professional engineers interested in reservoir sedimentation. Here is what is discussed: 1. INTRODUCTION, 2. BASIC OBJECTIVES, 3. PLANNING AND DESIGN OBJECTIVES, 4. FIELD FACILITIES, 5. TOPOGRAPHIC MAPS OF RESERVOIR AREA, 6. CLASSIFICATION OF SEDIMENT RANGES, 7. NUMBERING SEDIMENT RANGES, 8. LOCATING AND SPACING RANGES, 9. MODIFICATIONS TO EXISTING RANGE NETWORKS, 10. RANGE MONUMENTS AND SUPPLEMENTAL MARKERS, 11. PERMANENT MONUMENTS, 12. SEMI-PERMANENT RANGE MARKERS, 13. TEMPORARY MARKERS, 14. INSPECTION AND MAINTENANCE OF FIELD FACILITIES, 15. REMOVAL OF VEGETATION ALONG RANGE LINES, 16. BANK LINE SURVEY DATA, 17. SEDIMENT SURVEY GRIDS, 18. COMPONENTS OF RESERVOIR SEDIMENTATION SURVEYS, 19. FIELD MEASUREMENTS, 20. LABORATORY ANALYSES, 21. PROCESSING FIELD DATA, 22. ANALYSIS OF FIELD DATA, 23. INITIAL SURVEYS, 24. USE OF ECHO-SOUNDERS IN INITIAL SURVEYS, 25. PRESERVATION OF SURVEY RECORDS, 26. RESURVEYS, 27. FIELD SURVEY METHODS, 28. ALTERNATIVE METHODS, 29. SEDIMENT SPECIFIC WEIGHT AND GRADATION OF DEPOSITS.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 44
Book Description
Introductory technical guidance for professional engineers interested in reservoir sedimentation. Here is what is discussed: 1. INTRODUCTION, 2. BASIC OBJECTIVES, 3. PLANNING AND DESIGN OBJECTIVES, 4. FIELD FACILITIES, 5. TOPOGRAPHIC MAPS OF RESERVOIR AREA, 6. CLASSIFICATION OF SEDIMENT RANGES, 7. NUMBERING SEDIMENT RANGES, 8. LOCATING AND SPACING RANGES, 9. MODIFICATIONS TO EXISTING RANGE NETWORKS, 10. RANGE MONUMENTS AND SUPPLEMENTAL MARKERS, 11. PERMANENT MONUMENTS, 12. SEMI-PERMANENT RANGE MARKERS, 13. TEMPORARY MARKERS, 14. INSPECTION AND MAINTENANCE OF FIELD FACILITIES, 15. REMOVAL OF VEGETATION ALONG RANGE LINES, 16. BANK LINE SURVEY DATA, 17. SEDIMENT SURVEY GRIDS, 18. COMPONENTS OF RESERVOIR SEDIMENTATION SURVEYS, 19. FIELD MEASUREMENTS, 20. LABORATORY ANALYSES, 21. PROCESSING FIELD DATA, 22. ANALYSIS OF FIELD DATA, 23. INITIAL SURVEYS, 24. USE OF ECHO-SOUNDERS IN INITIAL SURVEYS, 25. PRESERVATION OF SURVEY RECORDS, 26. RESURVEYS, 27. FIELD SURVEY METHODS, 28. ALTERNATIVE METHODS, 29. SEDIMENT SPECIFIC WEIGHT AND GRADATION OF DEPOSITS.
Glossaries of BLM Surveying and Mapping Terms
Author:
Publisher:
ISBN:
Category : Cartography
Languages : en
Pages : 122
Book Description
Publisher:
ISBN:
Category : Cartography
Languages : en
Pages : 122
Book Description
An Introduction to Construction of Tunnels and Shafts for Professional Engineers
Author: J. Paul Guyer, P.E., R.A.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 134
Book Description
Introductory technical guidance for civil engineers, geotechnical engineers and construction managers interested in construction of tunnels and shafts. Here is what is discussed: 1. GENERAL, 2. TUNNEL EXCAVATION BY DRILLING AND BLASTING, 3. TUNNEL EXCAVATION BY MECHANICAL MEANS, 4. INITIAL GROUND SUPPORT, 5. SEQUENTIAL EXCAVATION AND SUPPORT, 6. PORTAL CONSTRUCTION, 7. SHAFT CONSTRUCTION, 8. OPTIONS FOR GROUND IMPROVEMENT, 9. DRAINAGE AND CONTROL OF GROUNDWATER, 10. CONSTRUCTION OF FINAL, PERMANENT TUNNEL LININGS, 11. VENTILATION OF TUNNELS AND SHAFTS, 12. SURVEYING FOR TUNNELS AND SHAFTS, 13. CONSTRUCTION HAZARDS AND SAFETY REQUIREMENTS, 14. ENVIRONMENTAL CONSIDERATIONS AND EFFECTS, 15. CONTRACTING PRACTICES, 16. PRACTICAL CONSIDERATIONS FOR THE PLANNING OF TUNNEL PROJECTS.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 134
Book Description
Introductory technical guidance for civil engineers, geotechnical engineers and construction managers interested in construction of tunnels and shafts. Here is what is discussed: 1. GENERAL, 2. TUNNEL EXCAVATION BY DRILLING AND BLASTING, 3. TUNNEL EXCAVATION BY MECHANICAL MEANS, 4. INITIAL GROUND SUPPORT, 5. SEQUENTIAL EXCAVATION AND SUPPORT, 6. PORTAL CONSTRUCTION, 7. SHAFT CONSTRUCTION, 8. OPTIONS FOR GROUND IMPROVEMENT, 9. DRAINAGE AND CONTROL OF GROUNDWATER, 10. CONSTRUCTION OF FINAL, PERMANENT TUNNEL LININGS, 11. VENTILATION OF TUNNELS AND SHAFTS, 12. SURVEYING FOR TUNNELS AND SHAFTS, 13. CONSTRUCTION HAZARDS AND SAFETY REQUIREMENTS, 14. ENVIRONMENTAL CONSIDERATIONS AND EFFECTS, 15. CONTRACTING PRACTICES, 16. PRACTICAL CONSIDERATIONS FOR THE PLANNING OF TUNNEL PROJECTS.
Engineering and Design: Structural Deformation Surveying (Engineer Manual Em 1110-2-1009)
Author:
Publisher:
ISBN: 9781780397436
Category : Technology & Engineering
Languages : en
Pages : 302
Book Description
This manual provides technical guidance for performing precise structural deformation surveys of locks, dams, and other hydraulic flood control or navigation structures. Accuracy, procedural, and quality control standards are defined for monitoring displacements in hydraulic structures.
Publisher:
ISBN: 9781780397436
Category : Technology & Engineering
Languages : en
Pages : 302
Book Description
This manual provides technical guidance for performing precise structural deformation surveys of locks, dams, and other hydraulic flood control or navigation structures. Accuracy, procedural, and quality control standards are defined for monitoring displacements in hydraulic structures.
ACSM Bulletin
Author:
Publisher:
ISBN:
Category : Cartography
Languages : en
Pages : 856
Book Description
Publisher:
ISBN:
Category : Cartography
Languages : en
Pages : 856
Book Description
Journal of the Surveying and Mapping Division
Author: American Society of Civil Engineers. Surveying and Mapping Division
Publisher:
ISBN:
Category : Surveying
Languages : en
Pages : 574
Book Description
Publisher:
ISBN:
Category : Surveying
Languages : en
Pages : 574
Book Description
Manual of Horizontal and Vertical Control Monuments
Author: Roger A. Edmison
Publisher:
ISBN:
Category : Flood damage prevention
Languages : en
Pages : 68
Book Description
Provides location of monuments installed by the Office of Water Resources which indicate land elevation along Midlothian and Natalie Creeks.
Publisher:
ISBN:
Category : Flood damage prevention
Languages : en
Pages : 68
Book Description
Provides location of monuments installed by the Office of Water Resources which indicate land elevation along Midlothian and Natalie Creeks.
A History of the Rectangular Survey System
Author: C. Albert White
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 794
Book Description
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 794
Book Description