Author: J. Paul Guyer, P.E., R.A.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 29
Book Description
Introductory technical guidance for civil engineers and construction managers interested in soil grouting for dams and other water retention structures. Here is what is discussed: 1. CONCRETE DAMS 2. EARTH AND ROCKFILL DAMS 3. TUNNELS, SHAFTS, AND CHAMBERS 4. APPLICATION TO NAVIGATION STRUCTURES.
An Introduction to Grouting Dams and Water Retention Structures
Author: J. Paul Guyer, P.E., R.A.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 29
Book Description
Introductory technical guidance for civil engineers and construction managers interested in soil grouting for dams and other water retention structures. Here is what is discussed: 1. CONCRETE DAMS 2. EARTH AND ROCKFILL DAMS 3. TUNNELS, SHAFTS, AND CHAMBERS 4. APPLICATION TO NAVIGATION STRUCTURES.
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 29
Book Description
Introductory technical guidance for civil engineers and construction managers interested in soil grouting for dams and other water retention structures. Here is what is discussed: 1. CONCRETE DAMS 2. EARTH AND ROCKFILL DAMS 3. TUNNELS, SHAFTS, AND CHAMBERS 4. APPLICATION TO NAVIGATION STRUCTURES.
Grouting and Deep Mixing
Author: Donald A. Bruce
Publisher:
ISBN: 9780784412350
Category : Grouting
Languages : en
Pages : 0
Book Description
GSP 228 contains contains 189 peer-reviewed papers focusing on the science and technology of grouting that were presented at the Fourth International Conference on Grouting and Deep Mixing, held in New Orleans, Louisiana, February 15-18, 2012.
Publisher:
ISBN: 9780784412350
Category : Grouting
Languages : en
Pages : 0
Book Description
GSP 228 contains contains 189 peer-reviewed papers focusing on the science and technology of grouting that were presented at the Fourth International Conference on Grouting and Deep Mixing, held in New Orleans, Louisiana, February 15-18, 2012.
Dam Foundation Grouting
Author: Kenneth D. Weaver
Publisher: Amer Society of Civil Engineers
ISBN: 9780872627925
Category : Technology & Engineering
Languages : en
Pages : 178
Book Description
Weaver investigates and critically reviews the most current grouting practices in the US and internationally. His presentation concentrates on practical issues, such as the factors affecting grouting effectiveness, design considerations, equipment, supervision and inspection of grouting, materials a
Publisher: Amer Society of Civil Engineers
ISBN: 9780872627925
Category : Technology & Engineering
Languages : en
Pages : 178
Book Description
Weaver investigates and critically reviews the most current grouting practices in the US and internationally. His presentation concentrates on practical issues, such as the factors affecting grouting effectiveness, design considerations, equipment, supervision and inspection of grouting, materials a
Earth and Rock-Fill Dams
Author: U. S. Army Corps of Engineers
Publisher:
ISBN: 9781410217127
Category : Dams
Languages : en
Pages : 0
Book Description
This manual presents fundamental principles underlying the design and construction of earth and rock-fill dams. The general principles presented herein are also applicable to the design and construction of earth levees.
Publisher:
ISBN: 9781410217127
Category : Dams
Languages : en
Pages : 0
Book Description
This manual presents fundamental principles underlying the design and construction of earth and rock-fill dams. The general principles presented herein are also applicable to the design and construction of earth levees.
Emerging Trends in Geotechnical Engineering
Author:
Publisher: IITG & IGS
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 135
Book Description
Proceedings of National Workshop on Emerging Trends in Geotechnical Engineering (ETGE 2012), Guwahati, 08th June 2012
Publisher: IITG & IGS
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 135
Book Description
Proceedings of National Workshop on Emerging Trends in Geotechnical Engineering (ETGE 2012), Guwahati, 08th June 2012
Grouting Equipment Manual
Author: Donald C. Hegebarth
Publisher: SME
ISBN: 0873353676
Category : Business & Economics
Languages : en
Pages : 137
Book Description
Pressure grouting is an essential construction procedure that is practiced by contractors and engineers around the world. Used since the 19th century, grouting reduces the amount of leakage through rock for dam foundations and underground works. It also strengthens soils to provide a stable foundation to support the weight of surface structures, such as buildings, bridges, and storage tanks. In addition, it is frequently used to repair deteriorated concrete and to produce concrete underwater. This manual introduces various types of equipment employed in pressure grouting applications performed in geotechnical works and examines the operating principles and maintenance issues relative to each equipment type. The term pressure grouting encompasses a wide variety of applications and operations, including dam foundation grouting, soil stabilization and permeation, consolidation and compaction grouting (except low-mobility), water cutoff and structural stabilization in rock tunnels, deep foundations via drilled piers, underwater concrete, structural concrete repairs, raising of settled slabs and structures, rock and soil anchors, and machine foundations and bases. The applications for pressure grouting operations are almost limitless, as the equipment can be employed anywhere fluid grout can be used. Primarily intended for machine operators and maintenance mechanics, this manual will also prove useful to specification writers, engineers, contractors, purchasing managers, and others who have a responsibility to specify, acquire, operate, or maintain pressure grouting equipment. Topics covered include mixers, agitators, pumps, delivery systems and accessories, but not electronic monitoring and other ancillary equipment.
Publisher: SME
ISBN: 0873353676
Category : Business & Economics
Languages : en
Pages : 137
Book Description
Pressure grouting is an essential construction procedure that is practiced by contractors and engineers around the world. Used since the 19th century, grouting reduces the amount of leakage through rock for dam foundations and underground works. It also strengthens soils to provide a stable foundation to support the weight of surface structures, such as buildings, bridges, and storage tanks. In addition, it is frequently used to repair deteriorated concrete and to produce concrete underwater. This manual introduces various types of equipment employed in pressure grouting applications performed in geotechnical works and examines the operating principles and maintenance issues relative to each equipment type. The term pressure grouting encompasses a wide variety of applications and operations, including dam foundation grouting, soil stabilization and permeation, consolidation and compaction grouting (except low-mobility), water cutoff and structural stabilization in rock tunnels, deep foundations via drilled piers, underwater concrete, structural concrete repairs, raising of settled slabs and structures, rock and soil anchors, and machine foundations and bases. The applications for pressure grouting operations are almost limitless, as the equipment can be employed anywhere fluid grout can be used. Primarily intended for machine operators and maintenance mechanics, this manual will also prove useful to specification writers, engineers, contractors, purchasing managers, and others who have a responsibility to specify, acquire, operate, or maintain pressure grouting equipment. Topics covered include mixers, agitators, pumps, delivery systems and accessories, but not electronic monitoring and other ancillary equipment.
An Introduction to Engineering of Dams
Author:
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 519
Book Description
Introductory technical guidance for civil engineers and construction managers interested in design and construction of dams. Here is what is discussed: 1. ARCH DAMS 2. GRAVITY DAMS 3. COFFER DAMS 4. ARCH DAM EARTHQUAKE ANALYSIS 5. ARCH DAM CONCRETE PROPERTIES 6. ARCH DAM CONSTRUCTION 7. FOUNDATION INVESTIGATIONS FOR ARCH DAMS 8. ARCH DAM INSTRUMENTATION 9. MANUAL LAYOUT OF ARCH DAMS 10. ARCH DAM OUTLETS 11. STATIC ANALYSIS OF ARCH DAMS 12. TEMPERATURE STUDIES FOR ARCH DAMS 13. CONCRETE CONDUITS 14: ANALYSIS OF CONCRETE GRAVITY DAMS 15. MISCELLANEOUS CONSIDERATION FOR GRAVITY DAMS
Publisher: Guyer Partners
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 519
Book Description
Introductory technical guidance for civil engineers and construction managers interested in design and construction of dams. Here is what is discussed: 1. ARCH DAMS 2. GRAVITY DAMS 3. COFFER DAMS 4. ARCH DAM EARTHQUAKE ANALYSIS 5. ARCH DAM CONCRETE PROPERTIES 6. ARCH DAM CONSTRUCTION 7. FOUNDATION INVESTIGATIONS FOR ARCH DAMS 8. ARCH DAM INSTRUMENTATION 9. MANUAL LAYOUT OF ARCH DAMS 10. ARCH DAM OUTLETS 11. STATIC ANALYSIS OF ARCH DAMS 12. TEMPERATURE STUDIES FOR ARCH DAMS 13. CONCRETE CONDUITS 14: ANALYSIS OF CONCRETE GRAVITY DAMS 15. MISCELLANEOUS CONSIDERATION FOR GRAVITY DAMS
Geotechnical Engineering of Dams, 2nd Edition
Author: Robin Fell
Publisher: CRC Press
ISBN: 1138000086
Category : Technology & Engineering
Languages : en
Pages : 1384
Book Description
Geotechnical Engineering of Dams, 2nd edition provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The main emphasis of this work is on embankment dams, but much of the text, particularly those parts related to geology, can be used for concrete gravity and arch dams. All phases of investigation, design and construction are covered. Detailed descriptions are given from the initial site assessment and site investigation program through to the preliminary and detailed design phases and, ultimately, the construction phase. The assessment of existing dams, including the analysis of risks posed by those dams, is also discussed. This wholly revised and significantly expanded 2nd edition includes a lengthy new appendix on the assessment of the likelihood of failure of dams by internal erosion and piping. This valuable source on dam engineering incorporates the 200+ years of collective experience of the authors in the subject area. Design methods are presented in combination with their theoretical basis, to enable the reader to develop a proper understanding of the possibilities and limitations of a method. For its practical, well-founded approach, this work can serve as a useful guide for professional dam engineers and engineering geologists and as a textbook for university students.
Publisher: CRC Press
ISBN: 1138000086
Category : Technology & Engineering
Languages : en
Pages : 1384
Book Description
Geotechnical Engineering of Dams, 2nd edition provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The main emphasis of this work is on embankment dams, but much of the text, particularly those parts related to geology, can be used for concrete gravity and arch dams. All phases of investigation, design and construction are covered. Detailed descriptions are given from the initial site assessment and site investigation program through to the preliminary and detailed design phases and, ultimately, the construction phase. The assessment of existing dams, including the analysis of risks posed by those dams, is also discussed. This wholly revised and significantly expanded 2nd edition includes a lengthy new appendix on the assessment of the likelihood of failure of dams by internal erosion and piping. This valuable source on dam engineering incorporates the 200+ years of collective experience of the authors in the subject area. Design methods are presented in combination with their theoretical basis, to enable the reader to develop a proper understanding of the possibilities and limitations of a method. For its practical, well-founded approach, this work can serve as a useful guide for professional dam engineers and engineering geologists and as a textbook for university students.
The Deep Mixing Method
Author: Masaki Kitazume
Publisher: CRC Press
ISBN: 0203589637
Category : Technology & Engineering
Languages : en
Pages : 434
Book Description
The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d
Publisher: CRC Press
ISBN: 0203589637
Category : Technology & Engineering
Languages : en
Pages : 434
Book Description
The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d
Dams and Control Works
Author: United States. Bureau of Reclamation
Publisher:
ISBN:
Category : Barrages
Languages : en
Pages : 228
Book Description
Publisher:
ISBN:
Category : Barrages
Languages : en
Pages : 228
Book Description