Author: Masakazu Tsumuraya
Publisher:
ISBN:
Category :
Languages : en
Pages : 102
Book Description
An Experimental Study of Incident Shock Wave/turbulent Boundary Layer Interactions
Author: Masakazu Tsumuraya
Publisher:
ISBN:
Category :
Languages : en
Pages : 102
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 102
Book Description
Shock Wave-Boundary-Layer Interactions
Author: Holger Babinsky
Publisher: Cambridge University Press
ISBN: 1139498649
Category : Technology & Engineering
Languages : en
Pages : 481
Book Description
Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.
Publisher: Cambridge University Press
ISBN: 1139498649
Category : Technology & Engineering
Languages : en
Pages : 481
Book Description
Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.
An Experimental Study of the Interaction Between the Reflected Shock Wave and a Turbulent Boundary Layer in a Shock Tube
Author: J.W. Allan
Publisher:
ISBN:
Category :
Languages : en
Pages : 41
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 41
Book Description
Experimental Study of Three-Dimensional Shock Wave Turbulent Boundary Layer Interaction - Scaling of Sharp and Blunt Fin-Induced Flowfields
Author: David S. Dolling
Publisher:
ISBN:
Category :
Languages : en
Pages : 61
Book Description
An experimental study of three-dimensional (3-D) shock wave turbulent boundary layer interaction has been carried out. Interactions generated by fin models having sharp and hemi-cylindrically blunted leading edges have been studied. Tests have been made using incoming turbulent boundary layer varying in thickness in the ratio of about 4:1. Extensive surface property measurements have been made on the test surface on which the incoming boundary layer developed and on the fin itself. All of these tests were carried out at a nominal freestream Mach number of 3, a freestream unit Reynolds number of about 63 million per meter, and under approximately adiabatic wall conditions. The emphasis in the study reported on in this paper was on two main areas. First, to determine the key geometric and/or flow parameters controlling the overall scaling and characteristics of both blunt and sharp fin-induced interactions. Second, to identify the conditions under which both blunt and sharp fins induced interactions have the same local scale and characteristics. (Author).
Publisher:
ISBN:
Category :
Languages : en
Pages : 61
Book Description
An experimental study of three-dimensional (3-D) shock wave turbulent boundary layer interaction has been carried out. Interactions generated by fin models having sharp and hemi-cylindrically blunted leading edges have been studied. Tests have been made using incoming turbulent boundary layer varying in thickness in the ratio of about 4:1. Extensive surface property measurements have been made on the test surface on which the incoming boundary layer developed and on the fin itself. All of these tests were carried out at a nominal freestream Mach number of 3, a freestream unit Reynolds number of about 63 million per meter, and under approximately adiabatic wall conditions. The emphasis in the study reported on in this paper was on two main areas. First, to determine the key geometric and/or flow parameters controlling the overall scaling and characteristics of both blunt and sharp fin-induced interactions. Second, to identify the conditions under which both blunt and sharp fins induced interactions have the same local scale and characteristics. (Author).
An experimental investigation of shock wave-turbulent boundary layer interactions with and without boundary layer suction
Author: Chen-Chih Sun
Publisher:
ISBN:
Category : Shock waves
Languages : en
Pages : 916
Book Description
Publisher:
ISBN:
Category : Shock waves
Languages : en
Pages : 916
Book Description
An Experimental Investigation of Shock Wave-turbulent Boundary Layer Interactions with and Without Boundary Layer Suction
Author: C. C. Sun
Publisher:
ISBN:
Category : Shock waves
Languages : en
Pages : 916
Book Description
Tabulated data from a series of experimental studies of the interaction of a shock wave with a turbulent boundary layer in axisymmetric flow configurations is presented. The studies were conducted at the walls of circular wind tunnels and on the cylindrical centerbody of an annular flow channel. Detailed pitot pressure profiles and wall static pressure profiles upstream of, within and downstream of the interaction region are given. Results are presented for flows at nominal freestream Mach Numbers of 2, 3 and 4. For studies at the tunnel sidewalls, the shock waves were produced by conical shock generators mounted on the centerline of the wind tunnel at zero angle of attack. The annular ring generator was used to produce the shock wave at the centerbody of the annular flow channel. The effects of boundary layer bleed were examined in the investigation. Both bleed rate and bleed location were studied. Most of the bleed studies were conducted with bleed holes drilled normal to the wall surface but the effects of slot suction were also examined. A summary of the principal results and conclusions is given.
Publisher:
ISBN:
Category : Shock waves
Languages : en
Pages : 916
Book Description
Tabulated data from a series of experimental studies of the interaction of a shock wave with a turbulent boundary layer in axisymmetric flow configurations is presented. The studies were conducted at the walls of circular wind tunnels and on the cylindrical centerbody of an annular flow channel. Detailed pitot pressure profiles and wall static pressure profiles upstream of, within and downstream of the interaction region are given. Results are presented for flows at nominal freestream Mach Numbers of 2, 3 and 4. For studies at the tunnel sidewalls, the shock waves were produced by conical shock generators mounted on the centerline of the wind tunnel at zero angle of attack. The annular ring generator was used to produce the shock wave at the centerbody of the annular flow channel. The effects of boundary layer bleed were examined in the investigation. Both bleed rate and bleed location were studied. Most of the bleed studies were conducted with bleed holes drilled normal to the wall surface but the effects of slot suction were also examined. A summary of the principal results and conclusions is given.
Experimental Investigation of Three-Dimensional Shock Wave Turbulent Boundary Layer Interaction: An Exploratory Study of Blunt Fin-Induced Flows
Author: David S. Dolling
Publisher:
ISBN:
Category :
Languages : en
Pages : 75
Book Description
An experimental study of three-dimensional (3-D) shock wave turbulent boundary layer interaction has been carried out. Interactions generated by fin models having sharp and hemi-cylindrically blunted leading edges have been studied. The emphasis in this particular study was twofold. First, the influence of incoming turbulent boundary layer thickness delta on the streamwise, spanwise and vertical scaling of the interaction was examined. Turbulent boundary layers varying in thickness from .127 cm (.05 in.) to 2.27 cm (0.89 in.) were used. In addition, a study has been conducted to examine the effects of the ratio D/delta (where D is the blunt fin leading edge diameter) on the interaction properties and scaling. Second, an investigation has been started to examine the unsteady shock wave-boundary layer structure and the resulting high frequency, large amplitude pressure fluctuations which occur ahead of and around the blunt fin leading edge. This is an area which in the past has been largely ignored, yet has important implications, since it is not clear that any mean surface property or flowfield measurements have any real physical significant. To date, measurement techniques and computer software have been developed and exploratory measurements made in the undisturbed turbulent boundary layer and also on the plane of symmetry ahead of the blunt fin.
Publisher:
ISBN:
Category :
Languages : en
Pages : 75
Book Description
An experimental study of three-dimensional (3-D) shock wave turbulent boundary layer interaction has been carried out. Interactions generated by fin models having sharp and hemi-cylindrically blunted leading edges have been studied. The emphasis in this particular study was twofold. First, the influence of incoming turbulent boundary layer thickness delta on the streamwise, spanwise and vertical scaling of the interaction was examined. Turbulent boundary layers varying in thickness from .127 cm (.05 in.) to 2.27 cm (0.89 in.) were used. In addition, a study has been conducted to examine the effects of the ratio D/delta (where D is the blunt fin leading edge diameter) on the interaction properties and scaling. Second, an investigation has been started to examine the unsteady shock wave-boundary layer structure and the resulting high frequency, large amplitude pressure fluctuations which occur ahead of and around the blunt fin leading edge. This is an area which in the past has been largely ignored, yet has important implications, since it is not clear that any mean surface property or flowfield measurements have any real physical significant. To date, measurement techniques and computer software have been developed and exploratory measurements made in the undisturbed turbulent boundary layer and also on the plane of symmetry ahead of the blunt fin.
An Experimental Investigation of the Shock Wave-turbulent Boundary Layer Interaction
Author: David William Kuntz
Publisher:
ISBN:
Category :
Languages : en
Pages : 544
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 544
Book Description
Exploratory experimental study of shock wave/transitional boundary layer interactions
Author: Egbert Sylvester Hood
Publisher:
ISBN:
Category :
Languages : en
Pages : 254
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 254
Book Description
An Experimental Study of the Interaction of a Conical Shock Wave and a Turbulent Boundary Layer Including Suction Effects
Author: William R. Seebaugh
Publisher:
ISBN:
Category : Axial flow
Languages : en
Pages : 9
Book Description
Publisher:
ISBN:
Category : Axial flow
Languages : en
Pages : 9
Book Description