An Experimental Investigation of Dual-injection Strategies on Diesel-methane Dual-fuel Low Temperature Combustion in a Single Cylinder Research Engine PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download An Experimental Investigation of Dual-injection Strategies on Diesel-methane Dual-fuel Low Temperature Combustion in a Single Cylinder Research Engine PDF full book. Access full book title An Experimental Investigation of Dual-injection Strategies on Diesel-methane Dual-fuel Low Temperature Combustion in a Single Cylinder Research Engine by Aamir Sohail. Download full books in PDF and EPUB format.
Author: Aamir Sohail
Publisher:
ISBN:
Category :
Languages : en
Pages : 84
Get Book Here
Book Description
The present manuscript discusses the performance and emission benefits due to two diesel injections in diesel-ignited methane dual fuel Low Temperature Combustion (LTC). A Single Cylinder Research Engine (SCRE) adapted for diesel-ignited methane dual fuelling was operated at 1500 rev/min and 5 bar BMEP with 1.5 bar intake manifold pressure. The first injection was fixed at 310 CAD. A 2nd injection sweep timing was performed to determine the best 2nd injection timing (as 375 CAD) at a fixed Percentage Energy Substitution (PES 75%). The motivation to use a second late injection ATDC was to oxidize Unburnt Hydrocarbons (HC) generated from the dual fuel combustion of first injection. Finally, an injection pressure sweep (550-1300 bar) helped achieve simultaneous reduction of HC (56%) and CO (43%) emissions accompanied with increased IFCE (10%) and combustion efficiency (12%) w.r.t. the baseline single injection (at 310 CAD) of dual fuel LTC.
Author: Aamir Sohail
Publisher:
ISBN:
Category :
Languages : en
Pages : 84
Get Book Here
Book Description
The present manuscript discusses the performance and emission benefits due to two diesel injections in diesel-ignited methane dual fuel Low Temperature Combustion (LTC). A Single Cylinder Research Engine (SCRE) adapted for diesel-ignited methane dual fuelling was operated at 1500 rev/min and 5 bar BMEP with 1.5 bar intake manifold pressure. The first injection was fixed at 310 CAD. A 2nd injection sweep timing was performed to determine the best 2nd injection timing (as 375 CAD) at a fixed Percentage Energy Substitution (PES 75%). The motivation to use a second late injection ATDC was to oxidize Unburnt Hydrocarbons (HC) generated from the dual fuel combustion of first injection. Finally, an injection pressure sweep (550-1300 bar) helped achieve simultaneous reduction of HC (56%) and CO (43%) emissions accompanied with increased IFCE (10%) and combustion efficiency (12%) w.r.t. the baseline single injection (at 310 CAD) of dual fuel LTC.
Author: Umang Dwivedi
Publisher:
ISBN:
Category : Co-combustion
Languages : en
Pages : 80
Get Book Here
Book Description
Diesel-ignited gasoline and diesel-ignited methane dual fuel combustion experiments were performed in a single-cylinder research engine (SCRE), outfitted with a common-rail diesel injection system and a stand-alone engine controller. Gasoline was injected in the intake port using a port-fuel injector, whereas methane was fumigated into the intake manifold. The engine was operated at a constant speed of 1500 rev/min, a constant load of 5.2 bar IMEP, and a constant gasoline/methane energy substitution of 80%. Parameters such as diesel injection timing (SOI), diesel injection pressure, and boost pressure were varied to quantify their impact on engine performance and engineout ISNOx, ISHC, ISCO, and smoke emissions. The change in combustion process from heterogeneous combustion to HCCI like combustion was also observed.
Author: Prabhat Ranjan Jha
Publisher:
ISBN:
Category :
Languages : en
Pages : 114
Get Book Here
Book Description
Dual fuel combustion is one strategy to achieve low oxides of nitrogen and soot emissions while maintaining the fuel conversion efficiency of IC engines. However, it also suffers from high engine-out carbon monoxide and unburned hydrocarbon emissions, and the incidence of knock at high loads. The present work focused on CFD simulation of diesel-methane dual fuel combustion in a single-cylinder research engine (SCRE). For pure diesel combustion, a load sweep of 2.5 bar brake mean effective pressure (BMEP) to 7.5 bar BMEP was performed at a constant engine speed of 1500 rpm and a diesel injection pressure of 500 bar. For diesel-methane dual fuel combustion, a methane percent energy substitution sweep was performed from 30% to 90 % at 1500 rpm, 3.3 bar BMEP, 500 bar Pinj, and 355 crank angle degrees (CAD) diesel injection timing. Combustion, performance, and emissions results are presented and compared with experimental data where possible.
Author: Prabhat Ranjan Jha
Publisher:
ISBN:
Category : Electronic dissertations
Languages : en
Pages : 313
Get Book Here
Book Description
It's crucial to use advanced combustion strategies to increase efficiency and decrease engine-out pollutants because of the compelling need to reduce the global carbon footprint. This dissertation proposes dual fuel low-temperature combustion as a viable strategy to decrease engine-out emissions and increase the thermal efficiency of future heavy-duty internal combustion (IC) engines. In dual fuel combustion, a low reactivity fuel (e.g. methane, propane) is ignited by a high reactivity fuel (diesel) in a compression-ignited engine. Generally, the energy fraction of low reactivity fuel is maintained at much higher levels than the energy fraction of the high reactivity fuel. For a properly calibrated engine, combustion occurs at lean and low-temperature conditions (LTC). This decreases the chances of the formation of soot and oxides of nitrogen within the engine. However, at low load conditions, this type of combustion results in high hydrocarbon and carbon monoxide emissions. The first part of this research experimentally examines the effect of methane (a natural gas surrogate) substitution on early injection dual fuel combustion at representative low loads of 3.3 and 5.0 bar BMEPs in a single-cylinder compression ignition engine (SCRE). Gaseous methane fumigated into the intake manifold at various methane energy fractions was ignited using a high-pressure diesel pilot injection at 310 CAD. Cyclic combustion variations at both loads were also analyzed to obtain further insights into the combustion process and identify opportunities to further improve fuel conversion efficiencies at low load operation. In the second part, the cyclic variations in dual fuel combustion of three different low reactivity fuels (methane, propane, and gasoline) ignited using a high-pressure diesel pilot injection was examined and the challenges and opportunities in utilizing methane, propane, and gasoline in diesel ignited dual fuel combustion, as well as strategies for mitigating cyclic variations, were explored. Finally, in the third part a CFD model was created for diesel methane dual fuel LTC. The validated model was used to investigate the effect of methane on diesel autoignition and various spray targeting strategies were explored to mitigate high hydrocarbon and carbon monoxide emissions at low load conditions.
Author: Mostafa Shameem Raihan
Publisher:
ISBN:
Category :
Languages : en
Pages : 140
Get Book Here
Book Description
The objective of this thesis is to investigate and compare the performance and emissions characteristics of diesel-ignited methane and diesel-ignited propane dual fuel LTC in a single cylinder research engine (SCRE) at a constant engine load of 5.1 bar net indicated mean effective pressure (IMEP) and at a constant engine speed of 1500 RPM. Percentage of energy substitution of propane or methane (0 - 90 percent), diesel injection timing (SOI: 355 CAD -- 280 CAD), rail pressure (200 bar -- 1300 bar) and boost pressure (1.1 bar -- 1.8 bar) were varied to quantify their impact on engine performance and engine-out ISNOx, ISHC, ISCO, and smoke emissions. Advancing SOI to 310 CAD and beyond yielded simultaneous ISNOx and smoke emissions. A rail pressure of 500 bar was the optimal one for both fueling combinations while increasing boost pressure over 1.2 bar had a very little effect on ISNOx and smoke emissions.
Author: Edward Scott Guerry
Publisher:
ISBN:
Category :
Languages : en
Pages : 79
Get Book Here
Book Description
Diesel-ignited methane dual fuel combustion experiments were performed in a single cylinder research engine (SCRE). Methane was fumigated into the intake manifold and injection of diesel was used to initiate combustion. The engine was operated at a constant speed of 1500 rev/min, and diesel rail pressure was maintained at 500 bar. Diesel injection timing (SOI) was varied to quantify its impact on engine performance and engine-out ISNOx, ISHC, ISCO, and smoke emissions. The SOI sweeps were performed at different net indicated mean effective pressures (IMEPs) of 4.1, 6.5, 9.5, and 12.1 bar. Intake manifold pressure was maintained at 1.5 bar for the 4.1 and 6.5 bar IMEP SOI sweeps and 1.8 bar for the 9.5 and 12.1 bar IMEP SOI sweeps. Advancing SOI to 310o and earlier resulted in reduced ISNOx. However, high methane percent energy substitution (PES) resulted in high ISHC emissions especially at low IMEP.
Author: Kalyan Kumar Srinivasan
Publisher: Springer
ISBN: 9811333076
Category : Technology & Engineering
Languages : en
Pages : 419
Get Book Here
Book Description
This book covers the various advanced reciprocating combustion engine technologies that utilize natural gas and alternative fuels for transportation and power generation applications. It is divided into three major sections consisting of both fundamental and applied technologies to identify (but not limited to) clean, high-efficiency opportunities with natural gas fueling that have been developed through experimental protocols, numerical and high-performance computational simulations, and zero-dimensional, multizone combustion simulations. Particular emphasis is placed on statutes to monitor fine particulate emissions from tailpipe of engines operating on natural gas and alternative fuels.
Author: Hongsheng Guo
Publisher: Frontiers Media SA
ISBN: 2889666212
Category : Technology & Engineering
Languages : en
Pages : 125
Get Book Here
Book Description
Author: William L. Hardy
Publisher:
ISBN:
Category :
Languages : en
Pages : 494
Get Book Here
Book Description
Author: Johnnie L. Williams (Jr.)
Publisher:
ISBN:
Category : Diesel motor exhaust gas
Languages : en
Pages : 136
Get Book Here
Book Description
Author's Abstract: Restrictions in the allowable exhaust gas emissions of diesel engines has become a driving factor in the design, development, and implementation of internal combustion (IC) engines. A dual fuel research engine concept was developed and implemented in an indirect injected engine in order to research combustion characteristics and emissions for non-road applications. The experimental engine was operated at a constant speed and load 2400 rpm and 5.5 bar indicated mean effective pressure (IMEP). n-Butanol was port fuel injected at 10%, 20%, 30%, and 40% by mass fraction with neat ultra-low sulfur diesel (ULSD#2). Peak pressure, maximum pressure rise rates, and heat release rates all increased with the increasing concentration of n-Butanol. MPRR increased by 127% and AHRR increased by 30.5% as a result of the shorter ignition delay and combustion duration. Ignition delay and combustion duration were reduced by 3.6% and 31.6% respectively. This occurred despite the lower cetane number of n-Butanol as a result of increased mixing due to the port fuel injection of the alcohol. NOx and soot were simultaneously reduced by 21% and 80% respectively. Carbon monoxide and unburned hydrocarbons emissions were increased for the dual fuel combustion strategies due to valve overlap. Results display large emission reductions of harmful pollutants, such as NOx and soot.
