Author: Lydia Parziale
Publisher: IBM Redbooks
ISBN: 0738436534
Category : Computers
Languages : en
Pages : 144
Book Description
This IBM® Redbooks® publication describes important networking concepts and industry standards that are used to support high availability on IBM System z®. Some of the networking standards described here are VLANs, VLAN trunking, link aggregation, virtual switches, VNICs, and load-balancing. We examine the various aspects of network setups and introduce the main Linux on System z networking commands and configuration files. We describe the management of network interface parameters, assignment of addresses to a network interface, and usage of the ifconfig command to configure network interfaces. We provide an overview of connectivity options available on the System z platform. We also describe high availability concepts and building a high availability solution using IBM Tivoli® System Automation. We also provide the implementation steps necessary to build a redundant network connections set up between an IBM z/VM® system and the external network switches using two Open Systems Adapter-Express 3 (OSA-Express 3) adapters with 10 Gb Ethernet ports. We describe the tests performed in our lab environment. The objectives of these tests were to gather information about performance and failover from the perspective of a real scenario, where the concepts of described in this book were applied. This book is focused on information that is practical and useful for readers with experience in network analysis and engineering networks, System z and Linux systems administrators, especially for readers that administer networks in their day-to-day activities. For additional reading: A Technote is availalble that explains changes to using channel bonding interfaces introduced with SLES 11 SP 2. It can be found at: http://www.redbooks.ibm.com/abstracts/tips1000.html?Open
Advanced Networking Concepts Applied Using Linux on IBM System z
Author: Lydia Parziale
Publisher: IBM Redbooks
ISBN: 0738436534
Category : Computers
Languages : en
Pages : 144
Book Description
This IBM® Redbooks® publication describes important networking concepts and industry standards that are used to support high availability on IBM System z®. Some of the networking standards described here are VLANs, VLAN trunking, link aggregation, virtual switches, VNICs, and load-balancing. We examine the various aspects of network setups and introduce the main Linux on System z networking commands and configuration files. We describe the management of network interface parameters, assignment of addresses to a network interface, and usage of the ifconfig command to configure network interfaces. We provide an overview of connectivity options available on the System z platform. We also describe high availability concepts and building a high availability solution using IBM Tivoli® System Automation. We also provide the implementation steps necessary to build a redundant network connections set up between an IBM z/VM® system and the external network switches using two Open Systems Adapter-Express 3 (OSA-Express 3) adapters with 10 Gb Ethernet ports. We describe the tests performed in our lab environment. The objectives of these tests were to gather information about performance and failover from the perspective of a real scenario, where the concepts of described in this book were applied. This book is focused on information that is practical and useful for readers with experience in network analysis and engineering networks, System z and Linux systems administrators, especially for readers that administer networks in their day-to-day activities. For additional reading: A Technote is availalble that explains changes to using channel bonding interfaces introduced with SLES 11 SP 2. It can be found at: http://www.redbooks.ibm.com/abstracts/tips1000.html?Open
Publisher: IBM Redbooks
ISBN: 0738436534
Category : Computers
Languages : en
Pages : 144
Book Description
This IBM® Redbooks® publication describes important networking concepts and industry standards that are used to support high availability on IBM System z®. Some of the networking standards described here are VLANs, VLAN trunking, link aggregation, virtual switches, VNICs, and load-balancing. We examine the various aspects of network setups and introduce the main Linux on System z networking commands and configuration files. We describe the management of network interface parameters, assignment of addresses to a network interface, and usage of the ifconfig command to configure network interfaces. We provide an overview of connectivity options available on the System z platform. We also describe high availability concepts and building a high availability solution using IBM Tivoli® System Automation. We also provide the implementation steps necessary to build a redundant network connections set up between an IBM z/VM® system and the external network switches using two Open Systems Adapter-Express 3 (OSA-Express 3) adapters with 10 Gb Ethernet ports. We describe the tests performed in our lab environment. The objectives of these tests were to gather information about performance and failover from the perspective of a real scenario, where the concepts of described in this book were applied. This book is focused on information that is practical and useful for readers with experience in network analysis and engineering networks, System z and Linux systems administrators, especially for readers that administer networks in their day-to-day activities. For additional reading: A Technote is availalble that explains changes to using channel bonding interfaces introduced with SLES 11 SP 2. It can be found at: http://www.redbooks.ibm.com/abstracts/tips1000.html?Open
Set up Linux on IBM System z for Production
Author: Lydia Parziale
Publisher: IBM Redbooks
ISBN: 0738438871
Category : Computers
Languages : en
Pages : 190
Book Description
This IBM® Redbooks® publication shows the power of IBM System z® virtualization and flexibility in sharing resources in a flexible production environment. In this book, we outline the planning and setup of Linux on System z to move from a development or test environment into production. As an example, we use one logical partition (LPAR) with shared CPUs with memory for a production environment and another LPAR that shares some CPUs, but also has a dedicated one for production. Running in IBM z/VM® mode allows for virtualization of servers and based on z/VM shares, can prioritize and control their resources. The size of the LPAR or z/VM resources depends on the workload and the applications that run that workload. We examine a typical web server environment, Java applications, and describe it by using a database management system, such as IBM DB2®. Network decisions are examined with regards to VSWITCH, shared Open Systems Adapter (OSA), IBM HiperSocketsTM and the HiperPAV, or FCP/SCSI attachment used with a storage area network (SAN) Volume Controller along with performance and throughput expectations. The intended audience for this IBM Redbooks publication is IT architects who are responsible for planning production environments and IT specialists who are responsible for implementation of production environments.
Publisher: IBM Redbooks
ISBN: 0738438871
Category : Computers
Languages : en
Pages : 190
Book Description
This IBM® Redbooks® publication shows the power of IBM System z® virtualization and flexibility in sharing resources in a flexible production environment. In this book, we outline the planning and setup of Linux on System z to move from a development or test environment into production. As an example, we use one logical partition (LPAR) with shared CPUs with memory for a production environment and another LPAR that shares some CPUs, but also has a dedicated one for production. Running in IBM z/VM® mode allows for virtualization of servers and based on z/VM shares, can prioritize and control their resources. The size of the LPAR or z/VM resources depends on the workload and the applications that run that workload. We examine a typical web server environment, Java applications, and describe it by using a database management system, such as IBM DB2®. Network decisions are examined with regards to VSWITCH, shared Open Systems Adapter (OSA), IBM HiperSocketsTM and the HiperPAV, or FCP/SCSI attachment used with a storage area network (SAN) Volume Controller along with performance and throughput expectations. The intended audience for this IBM Redbooks publication is IT architects who are responsible for planning production environments and IT specialists who are responsible for implementation of production environments.
Practical Migration from x86 to LinuxONE
Author: Lydia Parziale
Publisher: IBM Redbooks
ISBN: 0738459305
Category : Computers
Languages : en
Pages : 228
Book Description
LinuxONE is a portfolio of hardware, software, and solutions for an enterprise-grade Linux environment. It has been designed to run more transactions faster and with more security and reliability specifically for the open community. It fully embraces open source-based technology. Two servers are available for LinuxONE: The IBM® LinuxONE III LT1 and IBM LinuxONE III LT2. We describe these servers in "IBM LinuxONE servers" on page 5. Aside from still running SUSE Linux Enterprise Server and Red Hat Enterprise Linux Servers, LinuxONE runs Ubuntu, which is popular on x86 hardware. Ubuntu, which runs the cloud, smartphones, a computer that can remote control a planetary rover for NASA, many market-leading companies, and the Internet of Things, is now available on IBM LinuxONE servers. Together, these two technology communities deliver the perfect environment for cloud and DevOps. Ubuntu 16.04 on LinuxONE offers developers, enterprises, and Cloud Service Providers a scalable and secure platform for next generation applications that include OpenStack, KVM, Docker, and JuJu. The following are reasons why you would want to optimize your servers through virtualization using LinuxONE: Too many distributed physical servers with low utilization A lengthy provisioning process that delays the implementation of new applications Limitations in data center power and floor space High total cost of ownership (TCO) Difficulty allocating processing power for a dynamic environment This IBM Redbooks® publication provides a technical planning reference for IT organizations that are considering a migration from their x86 distributed servers to LinuxONE. This book walks you through some of the important considerations and planning issues that you might encounter during a migration project. Within the context of a pre-existing UNIX based or x86 environment, it presents an end-to-end view of the technical challenges and methods necessary to complete a successful migration to LinuxONE.
Publisher: IBM Redbooks
ISBN: 0738459305
Category : Computers
Languages : en
Pages : 228
Book Description
LinuxONE is a portfolio of hardware, software, and solutions for an enterprise-grade Linux environment. It has been designed to run more transactions faster and with more security and reliability specifically for the open community. It fully embraces open source-based technology. Two servers are available for LinuxONE: The IBM® LinuxONE III LT1 and IBM LinuxONE III LT2. We describe these servers in "IBM LinuxONE servers" on page 5. Aside from still running SUSE Linux Enterprise Server and Red Hat Enterprise Linux Servers, LinuxONE runs Ubuntu, which is popular on x86 hardware. Ubuntu, which runs the cloud, smartphones, a computer that can remote control a planetary rover for NASA, many market-leading companies, and the Internet of Things, is now available on IBM LinuxONE servers. Together, these two technology communities deliver the perfect environment for cloud and DevOps. Ubuntu 16.04 on LinuxONE offers developers, enterprises, and Cloud Service Providers a scalable and secure platform for next generation applications that include OpenStack, KVM, Docker, and JuJu. The following are reasons why you would want to optimize your servers through virtualization using LinuxONE: Too many distributed physical servers with low utilization A lengthy provisioning process that delays the implementation of new applications Limitations in data center power and floor space High total cost of ownership (TCO) Difficulty allocating processing power for a dynamic environment This IBM Redbooks® publication provides a technical planning reference for IT organizations that are considering a migration from their x86 distributed servers to LinuxONE. This book walks you through some of the important considerations and planning issues that you might encounter during a migration project. Within the context of a pre-existing UNIX based or x86 environment, it presents an end-to-end view of the technical challenges and methods necessary to complete a successful migration to LinuxONE.
Scale up for Linux on IBM Z
Author: Lydia Parziale
Publisher: IBM Redbooks
ISBN: 073845656X
Category : Computers
Languages : en
Pages : 78
Book Description
This book was written by IBM® IT specialists who have experience implementing IBM Z® solutions, especially Linux on IBM LinuxONETM (LinuxONE) or IBM Z servers. Therefore, the content of this book follows the guidelines from Linux and IBM z/VM® regarding LinuxONE and IBM Z installations. The preferred practices described in this book are gathered from the experiences of those specialists in hundreds of projects at IBM and customer environments. This publication provides you with all of the information that you need to decide the best scaling architecture when implementing Linux on IBM Z or LinuxONE. This book has the following goals: To inform you about x86 sprawl problems To inform you that x86 Vertical Scale out architectures are problematic going forward To provide solutions to x86 server sprawl problems To inform you about the LinuxONE and IBM Z differentiation for each x86 server sprawl problem To provide virtulization and security options for LinuxOne and IBM Z The scaling up and scaling out architectures enable you to scale the capacity of an existing system to attend a sporadic application demand or an application workload. This gives you some freedom to operate in the environment. However, if this activity is performed without correct planning and the correct architecture choice, it leads to a server sprawl situation where your environment houses more servers than it should based on its current and predicted requirements. Although scaling out on x86 systems is a common form of scaling because of their popularity, the x86 systems were originally designed as cheap computers. Unfortunately, the scale out on x86 can easily become a problem in terms of total cost of ownership (TCO) when the environment starts to increase in terms of number of physical servers. The LinuxONE and IBM Z servers solve the sprawl problem caused by the scaling out of x86 servers, and are an excellent choice for cloud, mobile, big data, blockchain, analytics, and other workloads that require a robust and flexible environment. This publication describes the advantages and disadvantages of the scaling options. The audience of this publication consists of the following groups: Customers, IBM Business Partners, and IBM consultants planning and installing Linux on IBM Z, IBM Z family or x86 platform System administrators administering the Linux Systems If you are a customer considering LinuxONE and IBM Z family as a platform for your applications (analytics, blockchain, cloud, or other) or a pre-sales person, read those publications.
Publisher: IBM Redbooks
ISBN: 073845656X
Category : Computers
Languages : en
Pages : 78
Book Description
This book was written by IBM® IT specialists who have experience implementing IBM Z® solutions, especially Linux on IBM LinuxONETM (LinuxONE) or IBM Z servers. Therefore, the content of this book follows the guidelines from Linux and IBM z/VM® regarding LinuxONE and IBM Z installations. The preferred practices described in this book are gathered from the experiences of those specialists in hundreds of projects at IBM and customer environments. This publication provides you with all of the information that you need to decide the best scaling architecture when implementing Linux on IBM Z or LinuxONE. This book has the following goals: To inform you about x86 sprawl problems To inform you that x86 Vertical Scale out architectures are problematic going forward To provide solutions to x86 server sprawl problems To inform you about the LinuxONE and IBM Z differentiation for each x86 server sprawl problem To provide virtulization and security options for LinuxOne and IBM Z The scaling up and scaling out architectures enable you to scale the capacity of an existing system to attend a sporadic application demand or an application workload. This gives you some freedom to operate in the environment. However, if this activity is performed without correct planning and the correct architecture choice, it leads to a server sprawl situation where your environment houses more servers than it should based on its current and predicted requirements. Although scaling out on x86 systems is a common form of scaling because of their popularity, the x86 systems were originally designed as cheap computers. Unfortunately, the scale out on x86 can easily become a problem in terms of total cost of ownership (TCO) when the environment starts to increase in terms of number of physical servers. The LinuxONE and IBM Z servers solve the sprawl problem caused by the scaling out of x86 servers, and are an excellent choice for cloud, mobile, big data, blockchain, analytics, and other workloads that require a robust and flexible environment. This publication describes the advantages and disadvantages of the scaling options. The audience of this publication consists of the following groups: Customers, IBM Business Partners, and IBM consultants planning and installing Linux on IBM Z, IBM Z family or x86 platform System administrators administering the Linux Systems If you are a customer considering LinuxONE and IBM Z family as a platform for your applications (analytics, blockchain, cloud, or other) or a pre-sales person, read those publications.
The Virtualization Cookbook for IBM z Systems Volume 3: SUSE Linux Enterprise Server 12
Author: Lydia Parziale
Publisher: IBM Redbooks
ISBN: 0738440981
Category : Computers
Languages : en
Pages : 202
Book Description
This IBM® Redbooks® publication is Volume 3 of a series of three books called The Virtualization Cookbook for IBM z Systems. The other two volumes are called: The Virtualization Cookbook for IBM z Systems Volume 1: IBM z/VM 6.3, SG24-8147 The Virtualization Cookbook for IBM z Systems Volume 2: Red Hat Enterprise Linux 7.1 Servers, SG24-8303 It is suggested that you start with Volume 1 of this series, because IBM z/VM® is the base "layer" when installing Linux on IBM z SystemsTM. Volume 1 starts with an introduction, describes planning, and then describes z/VM installation into a two-node, single system image (SSI) cluster, configuration, hardening, automation, and servicing. It adopts a cookbook format that provides a concise, repeatable set of procedures for installing and configuring z/VM using the SSI clustering feature. Volumes 2 and 3 describe how to roll your own Linux virtual servers on z Systems hardware under z/VM. The cookbook format continues with installing and customizing Linux. Volume 3 focuses on SUSE Linux Enterprise Server 12. It describes how to install and configure SUSE Linux Enterprise Server 12 onto the Linux administration system, which does the cloning and other tasks. It also explains how to use AutoYaST2, which enables you to automatically install Linux using a configuration file, and explains how to create and use appliances and bootable images from configuration files. In addition, it provides information about common tasks and tools available to service SUSE Linux Enterprise Server.
Publisher: IBM Redbooks
ISBN: 0738440981
Category : Computers
Languages : en
Pages : 202
Book Description
This IBM® Redbooks® publication is Volume 3 of a series of three books called The Virtualization Cookbook for IBM z Systems. The other two volumes are called: The Virtualization Cookbook for IBM z Systems Volume 1: IBM z/VM 6.3, SG24-8147 The Virtualization Cookbook for IBM z Systems Volume 2: Red Hat Enterprise Linux 7.1 Servers, SG24-8303 It is suggested that you start with Volume 1 of this series, because IBM z/VM® is the base "layer" when installing Linux on IBM z SystemsTM. Volume 1 starts with an introduction, describes planning, and then describes z/VM installation into a two-node, single system image (SSI) cluster, configuration, hardening, automation, and servicing. It adopts a cookbook format that provides a concise, repeatable set of procedures for installing and configuring z/VM using the SSI clustering feature. Volumes 2 and 3 describe how to roll your own Linux virtual servers on z Systems hardware under z/VM. The cookbook format continues with installing and customizing Linux. Volume 3 focuses on SUSE Linux Enterprise Server 12. It describes how to install and configure SUSE Linux Enterprise Server 12 onto the Linux administration system, which does the cloning and other tasks. It also explains how to use AutoYaST2, which enables you to automatically install Linux using a configuration file, and explains how to create and use appliances and bootable images from configuration files. In addition, it provides information about common tasks and tools available to service SUSE Linux Enterprise Server.
The Virtualization Cookbook for IBM Z Volume 2: Red Hat Enterprise Linux 8.2
Author: Lydia Parziale
Publisher: IBM Redbooks
ISBN: 0738460060
Category : Computers
Languages : en
Pages : 282
Book Description
This IBM® Redbooks® publication is Volume 2 of a five-volume series of books entitled The Virtualization Cookbook for IBM Z®. This volume includes the following chapters: Chapter 1, "Installing Red Hat Enterprise Linux on LNXADMIN" on page 3, describes how to install and configure Red Hat Enterprise Linux onto the Linux Administration server, which performs the cloning and other tasks. Chapter 2, "Automated Red Hat Enterprise Linux installations by using Kickstart" on page 37, describes how to use Red Hat's kickstart tool to create Linux systems. This tool is fundamentally different from cloning in that an automated installation is implemented. You can try kickstart and cloning. Understand that these applications attempt to accomplish the same goal of quickly getting Linux systems up and running, and that you do not need to use both. Chapter 3, "Working with subscription-manager, yum, and DaNdiFied" on page 47, describes how the Red Hat Network works. It provides centralized management and provisioning for multiple Red Hat Enterprise Linux systems. Kickstart is an easy and fast way to provision your Linux guests in any supported Linux platform. It re-creates the operating system from the beginning by using the kickstart profile configuration file that installs the new operating system unattended. It also sets up the new guest according to the definition that was set up in the kickstart file. Usually, Linux is administered by the same team that manages Linux on all platforms. By using kickstart, you can create a basic profile that can be used in all supported platforms and customize Linux profiles, as needed. Cloning requires a better understanding of the z/VM environment and z/VM skills. It is a fast process if you enable the IBM FlashCopy® feature in advance. It clones the disks from a golden image to new disks that are used by the new Linux guest. The process can be automated by using the cloning scripts that are supplied with this book. It is recommended that you start with The Virtualization Cookbook for IBM Z Volume 1: IBM z/VM 7.2, SG24-8147 of this series because the IBM® z/VM hypervisor is the foundation (or base "layer") for installing Linux on IBM Z.
Publisher: IBM Redbooks
ISBN: 0738460060
Category : Computers
Languages : en
Pages : 282
Book Description
This IBM® Redbooks® publication is Volume 2 of a five-volume series of books entitled The Virtualization Cookbook for IBM Z®. This volume includes the following chapters: Chapter 1, "Installing Red Hat Enterprise Linux on LNXADMIN" on page 3, describes how to install and configure Red Hat Enterprise Linux onto the Linux Administration server, which performs the cloning and other tasks. Chapter 2, "Automated Red Hat Enterprise Linux installations by using Kickstart" on page 37, describes how to use Red Hat's kickstart tool to create Linux systems. This tool is fundamentally different from cloning in that an automated installation is implemented. You can try kickstart and cloning. Understand that these applications attempt to accomplish the same goal of quickly getting Linux systems up and running, and that you do not need to use both. Chapter 3, "Working with subscription-manager, yum, and DaNdiFied" on page 47, describes how the Red Hat Network works. It provides centralized management and provisioning for multiple Red Hat Enterprise Linux systems. Kickstart is an easy and fast way to provision your Linux guests in any supported Linux platform. It re-creates the operating system from the beginning by using the kickstart profile configuration file that installs the new operating system unattended. It also sets up the new guest according to the definition that was set up in the kickstart file. Usually, Linux is administered by the same team that manages Linux on all platforms. By using kickstart, you can create a basic profile that can be used in all supported platforms and customize Linux profiles, as needed. Cloning requires a better understanding of the z/VM environment and z/VM skills. It is a fast process if you enable the IBM FlashCopy® feature in advance. It clones the disks from a golden image to new disks that are used by the new Linux guest. The process can be automated by using the cloning scripts that are supplied with this book. It is recommended that you start with The Virtualization Cookbook for IBM Z Volume 1: IBM z/VM 7.2, SG24-8147 of this series because the IBM® z/VM hypervisor is the foundation (or base "layer") for installing Linux on IBM Z.
The Virtualization Cookbook for IBM Z Volume 1: IBM z/VM 7.2
Author: Lydia Parziale
Publisher: IBM Redbooks
ISBN: 0738459720
Category : Computers
Languages : en
Pages : 546
Book Description
This IBM® Redbooks® publication is volume one of five in a series of books entitled The Virtualization Cookbook for IBM Z. The series includes the following volumes: The Virtualization Cookbook for IBM z Systems® Volume 1: IBM z/VM® 7.2, SG24-8147 The Virtualization Cookbook for IBM Z Volume 2: Red Hat Enterprise Linux 8.2 Servers, SG24-8303 The Virtualization Cookbook for IBM z Systems Volume 3: SUSE Linux Enterprise Server 12, SG24-8890 The Virtualization Cookbook for IBM z Systems Volume 4: Ubuntu Server 16.04, SG24-8354 Virtualization Cookbook for IBM Z Volume 5: KVM, SG24-8463 It is recommended that you start with Volume 1 of this series because the IBM z/VM hypervisor is the foundation (or base "layer") for installing Linux on IBM Z®. This book series assumes that you are generally familiar with IBM Z technology and terminology. It does not assume an in-depth understanding of z/VM or Linux. It is written for individuals who want to start quickly with z/VM and Linux, and get virtual servers up and running in a short time (days, not weeks or months). Volume 1 starts with a solution orientation, discusses planning and security, and then, describes z/VM installation methods, configuration, hardening, automation, servicing, networking, optional features, and more. It adopts a "cookbook-style" format that provides a concise, repeatable set of procedures for installing, configuring, administering, and maintaining z/VM. This volume also includes a chapter on monitoring z/VM and the Linux virtual servers that are hosted. Volumes 2, 3, and 4 assume that you completed all of the steps that are described in Volume 1. From that common foundation, these volumes describe how to create your own Linux virtual servers on IBM Z hardware under IBM z/VM. The cookbook format continues with installing and customizing Linux. Volume 5 provides an explanation of the kernel-based virtual machine (KVM) on IBM Z and how it can use the z/Architecture®. It focuses on the planning of the environment and provides installation and configuration definitions that are necessary to build, manage, and monitor a KVM on Z environment. This publication applies to the supported Linux on Z distributions (Red Hat, SUSE, and Ubuntu).
Publisher: IBM Redbooks
ISBN: 0738459720
Category : Computers
Languages : en
Pages : 546
Book Description
This IBM® Redbooks® publication is volume one of five in a series of books entitled The Virtualization Cookbook for IBM Z. The series includes the following volumes: The Virtualization Cookbook for IBM z Systems® Volume 1: IBM z/VM® 7.2, SG24-8147 The Virtualization Cookbook for IBM Z Volume 2: Red Hat Enterprise Linux 8.2 Servers, SG24-8303 The Virtualization Cookbook for IBM z Systems Volume 3: SUSE Linux Enterprise Server 12, SG24-8890 The Virtualization Cookbook for IBM z Systems Volume 4: Ubuntu Server 16.04, SG24-8354 Virtualization Cookbook for IBM Z Volume 5: KVM, SG24-8463 It is recommended that you start with Volume 1 of this series because the IBM z/VM hypervisor is the foundation (or base "layer") for installing Linux on IBM Z®. This book series assumes that you are generally familiar with IBM Z technology and terminology. It does not assume an in-depth understanding of z/VM or Linux. It is written for individuals who want to start quickly with z/VM and Linux, and get virtual servers up and running in a short time (days, not weeks or months). Volume 1 starts with a solution orientation, discusses planning and security, and then, describes z/VM installation methods, configuration, hardening, automation, servicing, networking, optional features, and more. It adopts a "cookbook-style" format that provides a concise, repeatable set of procedures for installing, configuring, administering, and maintaining z/VM. This volume also includes a chapter on monitoring z/VM and the Linux virtual servers that are hosted. Volumes 2, 3, and 4 assume that you completed all of the steps that are described in Volume 1. From that common foundation, these volumes describe how to create your own Linux virtual servers on IBM Z hardware under IBM z/VM. The cookbook format continues with installing and customizing Linux. Volume 5 provides an explanation of the kernel-based virtual machine (KVM) on IBM Z and how it can use the z/Architecture®. It focuses on the planning of the environment and provides installation and configuration definitions that are necessary to build, manage, and monitor a KVM on Z environment. This publication applies to the supported Linux on Z distributions (Red Hat, SUSE, and Ubuntu).
IBM z/OS Container Extensions (zCX) Use Cases
Author: Lydia Parziale
Publisher: IBM Redbooks
ISBN: 0738459119
Category : Computers
Languages : en
Pages : 274
Book Description
Is it time for you to modernize your IBM® z/OS® applications to allow for access to an entire system of open source and Linux on IBM Z® workloads? Is co-location of these workloads on the z/OS platform with no porting requirements of value to you? Your open source or Linux on IBM Z software can benefit from being co-located and managed inside a z/OS environment; leveraging z/OS quality of service for optimized business continuity. Your software can be integrated with and can help complement existing z/OS workloads and environments. If your software can communicate with z/OS and external components by using TCP/IP, now is the time examine how IBM z/OS Container Extensions (IBM zCX) makes it possible to integrate Linux on Z applications with z/OS. This IBM Redbooks® publication is a follow-on to Getting started with z/OS Container Extensions and Docker, SG24-8457, which provides some interesting use cases for zCX. We start with a brief overview of IBM zCX. In Part 1, "Integration" on page 9, we demonstrate use cases that integrate with zCX. In Part 2, "DevOps in zCX" on page 165, we describe how organizations can benefit from running a DevOps flow in zCX and we describe the set up of necessary components. Finally, in Part 3, "Monitoring and managing zCX systems" on page 229, we discuss IBM Service Management Unite Automation, a free-of-charge customizable dashboard interface and an important discussion of creating the suitable container restart policy.
Publisher: IBM Redbooks
ISBN: 0738459119
Category : Computers
Languages : en
Pages : 274
Book Description
Is it time for you to modernize your IBM® z/OS® applications to allow for access to an entire system of open source and Linux on IBM Z® workloads? Is co-location of these workloads on the z/OS platform with no porting requirements of value to you? Your open source or Linux on IBM Z software can benefit from being co-located and managed inside a z/OS environment; leveraging z/OS quality of service for optimized business continuity. Your software can be integrated with and can help complement existing z/OS workloads and environments. If your software can communicate with z/OS and external components by using TCP/IP, now is the time examine how IBM z/OS Container Extensions (IBM zCX) makes it possible to integrate Linux on Z applications with z/OS. This IBM Redbooks® publication is a follow-on to Getting started with z/OS Container Extensions and Docker, SG24-8457, which provides some interesting use cases for zCX. We start with a brief overview of IBM zCX. In Part 1, "Integration" on page 9, we demonstrate use cases that integrate with zCX. In Part 2, "DevOps in zCX" on page 165, we describe how organizations can benefit from running a DevOps flow in zCX and we describe the set up of necessary components. Finally, in Part 3, "Monitoring and managing zCX systems" on page 229, we discuss IBM Service Management Unite Automation, a free-of-charge customizable dashboard interface and an important discussion of creating the suitable container restart policy.
Getting Started with Docker Enterprise Edition on IBM Z
Author: Lydia Parziale
Publisher: IBM Redbooks
ISBN: 0738457507
Category : Computers
Languages : en
Pages : 200
Book Description
What is the difference between a virtual machine and a Docker container? A virtual machine (VM) is like a house. It is fully contained with its own plumbing and heating and cooling system. If you want another house, you build a new foundation, with new walls, new plumbing, and its own heating and cooling system. VMs are large. They start their own operating systems. Containers are like apartments in an apartment building. They share infrastructure. They can be many different sizes. You can have different sizes depending on the needs. Containers "live" in a Docker host. If you build a house, you need many resources. If you build an apartment building, each unit shares resources. Like an apartment, Docker is smaller and satisfies specific needs, is more agile, and more easily changed. This IBM® Redbooks® publication examines the installation and operation of Docker Enterprise Edition on the IBM Z® platform.
Publisher: IBM Redbooks
ISBN: 0738457507
Category : Computers
Languages : en
Pages : 200
Book Description
What is the difference between a virtual machine and a Docker container? A virtual machine (VM) is like a house. It is fully contained with its own plumbing and heating and cooling system. If you want another house, you build a new foundation, with new walls, new plumbing, and its own heating and cooling system. VMs are large. They start their own operating systems. Containers are like apartments in an apartment building. They share infrastructure. They can be many different sizes. You can have different sizes depending on the needs. Containers "live" in a Docker host. If you build a house, you need many resources. If you build an apartment building, each unit shares resources. Like an apartment, Docker is smaller and satisfies specific needs, is more agile, and more easily changed. This IBM® Redbooks® publication examines the installation and operation of Docker Enterprise Edition on the IBM Z® platform.
Getting started with z/OS Container Extensions and Docker
Author: Lydia Parziale
Publisher: IBM Redbooks
ISBN: 0738458155
Category : Computers
Languages : en
Pages : 270
Book Description
IBM® z/OS® Container Extensions (IBM zCX) is a new feature of the next version of the IBM z/OS Operating System (z/OS V2.4). It makes it possible to run Linux on IBM Z® applications that are packaged as Docker container images on z/OS. Application developers can develop, and data centers can operate, popular open source packages, Linux applications, IBM software, and third-party software together with z/OS applications and data. This IBM Redbooks® publication helps you to understand the concepts, business perspectives and reference architecture for installing, tailoring, and configuring zCX in your own environment.
Publisher: IBM Redbooks
ISBN: 0738458155
Category : Computers
Languages : en
Pages : 270
Book Description
IBM® z/OS® Container Extensions (IBM zCX) is a new feature of the next version of the IBM z/OS Operating System (z/OS V2.4). It makes it possible to run Linux on IBM Z® applications that are packaged as Docker container images on z/OS. Application developers can develop, and data centers can operate, popular open source packages, Linux applications, IBM software, and third-party software together with z/OS applications and data. This IBM Redbooks® publication helps you to understand the concepts, business perspectives and reference architecture for installing, tailoring, and configuring zCX in your own environment.