Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 86
Book Description
Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal Experiment Control and Monitor Software User's Guide, Version 1.0
Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal Experiment Control and Monitor Software Maintenance Manual, Version 1.0
Author: Richard C. Reinhart
Publisher:
ISBN:
Category :
Languages : en
Pages : 132
Book Description
The Experiment Control and Monitor (EC & M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC & M software is one segment of the Control and Performance Monitoring (C & PM) software system of the HBR-LET. The EC & M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C & PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC & M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC & M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document. The EC & M Software Maintenance Manual, Version 1.0 (NASA-CR-189161) is a programmer's guide that describes current implementation of the EC & M software from a technical perspective. An overview of the EC & M software, computer algorithms, format representation, and computer hardware configuration are included in the manual.
Publisher:
ISBN:
Category :
Languages : en
Pages : 132
Book Description
The Experiment Control and Monitor (EC & M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC & M software is one segment of the Control and Performance Monitoring (C & PM) software system of the HBR-LET. The EC & M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C & PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC & M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC & M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document. The EC & M Software Maintenance Manual, Version 1.0 (NASA-CR-189161) is a programmer's guide that describes current implementation of the EC & M software from a technical perspective. An overview of the EC & M software, computer algorithms, format representation, and computer hardware configuration are included in the manual.
Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal Experiment Control and Monitor Software User's Guide, Version 1. 0
Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722157999
Category :
Languages : en
Pages : 84
Book Description
The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document. Reinhart, Richard C. Unspecified Center...
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722157999
Category :
Languages : en
Pages : 84
Book Description
The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document. Reinhart, Richard C. Unspecified Center...
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 702
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 702
Book Description
Government Reports Annual Index
Author:
Publisher:
ISBN:
Category : Research
Languages : en
Pages : 1290
Book Description
Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.
Publisher:
ISBN:
Category : Research
Languages : en
Pages : 1290
Book Description
Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.
Government Reports Announcements & Index
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1690
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1690
Book Description
Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal Power Control and Rain Fade Software Test Plan, Version 1. 0
Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722048631
Category :
Languages : en
Pages : 44
Book Description
The Power Control and Rain Fade Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Power Control and Rain Fade Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Power Control and Rain Fade Software automatically controls the LET uplink power to compensate for signal fades. Besides power augmentation, the C&PM Software system is also responsible for instrument control during HBR-LET experiments, control of the Intermediate Frequency Switch Matrix on board the ACTS to yield a desired path through the spacecraft payload, and data display. The Power Control and Rain Fade Software User's Guide, Version 1.0 outlines the commands and procedures to install and operate the Power Control and Rain Fade Software. The Power Control and Rain Fade Software Maintenance Manual, Version 1.0 is a programmer's guide to the Power Control and Rain Fade Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Power Control and Rain Fade Software, computer algorithms, format representations, and computer hardware configuration. The Power Control and Rain Fade Test Plan provides a step-by-step procedure to verify the operation of the software using a predetermined signal fade event. The Test Plan also provides a means to demonstrate the capability of the software. Reinhart, Richard C. Unspecified Center NAS3-25776; RTOP 679-50-0A...
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722048631
Category :
Languages : en
Pages : 44
Book Description
The Power Control and Rain Fade Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Power Control and Rain Fade Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Power Control and Rain Fade Software automatically controls the LET uplink power to compensate for signal fades. Besides power augmentation, the C&PM Software system is also responsible for instrument control during HBR-LET experiments, control of the Intermediate Frequency Switch Matrix on board the ACTS to yield a desired path through the spacecraft payload, and data display. The Power Control and Rain Fade Software User's Guide, Version 1.0 outlines the commands and procedures to install and operate the Power Control and Rain Fade Software. The Power Control and Rain Fade Software Maintenance Manual, Version 1.0 is a programmer's guide to the Power Control and Rain Fade Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Power Control and Rain Fade Software, computer algorithms, format representations, and computer hardware configuration. The Power Control and Rain Fade Test Plan provides a step-by-step procedure to verify the operation of the software using a predetermined signal fade event. The Test Plan also provides a means to demonstrate the capability of the software. Reinhart, Richard C. Unspecified Center NAS3-25776; RTOP 679-50-0A...
Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal Communication Protocol Software User's Guide, Version 1. 0
Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722048549
Category :
Languages : en
Pages : 50
Book Description
The Communication Protocol Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Communication Protocol Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Communication Protocol Software allows users to control and configure the Intermediate Frequency Switch Matrix (IFSM) on board the ACTS to yield a desired path through the spacecraft payload. Besides IFSM control, the C&PM Software System is also responsible for instrument control during HBR-LET experiments, uplink power control of the HBR-LET to demonstrate power augmentation during signal fade events, and data display. The Communication Protocol Software User's Guide, Version 1.0 (NASA CR-189162) outlines the commands and procedures to install and operate the Communication Protocol Software. Configuration files used to control the IFSM, operator commands, and error recovery procedures are discussed. The Communication Protocol Software Maintenance Manual, Version 1.0 (NASA CR-189163, to be published) is a programmer's guide to the Communication Protocol Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Communication Protocol Software, computer algorithms, format representations, and computer hardware configuration. The Communication Protocol Software Test Plan (NASA CR-189164, to be published) provides a step-by-step procedure to verify the operation of the software. Included in the Test Plan is command transmission, telemetry reception, error detection, and error recovery procedures. Reinhart, Richard C. Unspecified Center NAS3-25776; RTOP 679-50-0A...
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722048549
Category :
Languages : en
Pages : 50
Book Description
The Communication Protocol Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Communication Protocol Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Communication Protocol Software allows users to control and configure the Intermediate Frequency Switch Matrix (IFSM) on board the ACTS to yield a desired path through the spacecraft payload. Besides IFSM control, the C&PM Software System is also responsible for instrument control during HBR-LET experiments, uplink power control of the HBR-LET to demonstrate power augmentation during signal fade events, and data display. The Communication Protocol Software User's Guide, Version 1.0 (NASA CR-189162) outlines the commands and procedures to install and operate the Communication Protocol Software. Configuration files used to control the IFSM, operator commands, and error recovery procedures are discussed. The Communication Protocol Software Maintenance Manual, Version 1.0 (NASA CR-189163, to be published) is a programmer's guide to the Communication Protocol Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Communication Protocol Software, computer algorithms, format representations, and computer hardware configuration. The Communication Protocol Software Test Plan (NASA CR-189164, to be published) provides a step-by-step procedure to verify the operation of the software. Included in the Test Plan is command transmission, telemetry reception, error detection, and error recovery procedures. Reinhart, Richard C. Unspecified Center NAS3-25776; RTOP 679-50-0A...
Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal Experiment Control and Monitor Software Maintenance Manual, Version 1. 0
Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722919603
Category :
Languages : en
Pages : 108
Book Description
The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document. The EC&M Software Maintenance Manual, Version 1.0 (NASA-CR-189161) is a programmer's guide that describes current implementation of the EC&M software from a technical perspective. An overview of the EC&M software, computer algorithms, format representation, and computer hardware configuration are included in the manual. Reinhart, Richard C. Unspecified Center ACTS; COMPUTER PROGRAMS; DATA LINKS; HUMAN-COMPUTER INTERFACE; MANUALS; UPLINKING; ALGORITHMS; COMPUTER PROGRAMMING; FORTRAN; GROUND STATIONS; MAINTENANCE; SUPPORT SYSTEMS...
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722919603
Category :
Languages : en
Pages : 108
Book Description
The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document. The EC&M Software Maintenance Manual, Version 1.0 (NASA-CR-189161) is a programmer's guide that describes current implementation of the EC&M software from a technical perspective. An overview of the EC&M software, computer algorithms, format representation, and computer hardware configuration are included in the manual. Reinhart, Richard C. Unspecified Center ACTS; COMPUTER PROGRAMS; DATA LINKS; HUMAN-COMPUTER INTERFACE; MANUALS; UPLINKING; ALGORITHMS; COMPUTER PROGRAMMING; FORTRAN; GROUND STATIONS; MAINTENANCE; SUPPORT SYSTEMS...
China
Author: World Bank
Publisher: World Bank Publications
ISBN: 9780821323953
Category : Business & Economics
Languages : en
Pages : 1422
Book Description
The Republic of Korea's industrial policy has directed that nation's economy through nearly three decades of spectacular growth. But the authors of this paper maintain that this policy is showing signs of being outmoded. The time has come, the authors argue, for the Korean government to stop managing the economy's structural development and to redefine the responsibilities of business and government. Under this proposed compact, the allocation of resources would shift from the government to the private industrial and financial sectors. The transformation of the government bureaucracy from an ad hoc policy role to one of a transparent and predictable regulator is a key to the success of this undertaking. These new directions would present the government with enormous challenges. Greater competitive discipline and regulatory oversight would be required. While dealing with the complexities of the transition, the government would have to maintain macroeconomic stability and the momentum of savings and investment. For comparison, the study examines the industrial economies of France, Germany, Japan, and the United States, which underwent similar shifts.
Publisher: World Bank Publications
ISBN: 9780821323953
Category : Business & Economics
Languages : en
Pages : 1422
Book Description
The Republic of Korea's industrial policy has directed that nation's economy through nearly three decades of spectacular growth. But the authors of this paper maintain that this policy is showing signs of being outmoded. The time has come, the authors argue, for the Korean government to stop managing the economy's structural development and to redefine the responsibilities of business and government. Under this proposed compact, the allocation of resources would shift from the government to the private industrial and financial sectors. The transformation of the government bureaucracy from an ad hoc policy role to one of a transparent and predictable regulator is a key to the success of this undertaking. These new directions would present the government with enormous challenges. Greater competitive discipline and regulatory oversight would be required. While dealing with the complexities of the transition, the government would have to maintain macroeconomic stability and the momentum of savings and investment. For comparison, the study examines the industrial economies of France, Germany, Japan, and the United States, which underwent similar shifts.