Author: Jürgen Garbrecht
Publisher:
ISBN:
Category : Channels (Hydraulic engineering)
Languages : en
Pages : 40

Get Book Here

Book Description

Author:
Publisher:
ISBN:
Category : Water
Languages : en
Pages : 962

Get Book Here

Book Description

Author: A.T. Riddick
Publisher: Geological Society of London
ISBN: 1862396876
Category : Science
Languages : en
Pages : 274

Get Book Here

Book Description
The discipline of Integrated Environmental Modelling (IEM) has developed in order to solve complex environmental problems, for example understanding the impacts of climate change on the physical environment. IEM provides methods to fuse or link models together, this in turn requires facilities to make models discoverable and also to make the outputs of modelling easily visualized. The vision and challenges for IEM going forward are summarized by leading proponents. Several case studies describe the application of model fusion to a range of real-world problems including integrating groundwater and recharge models within the UK Environment Agency, and the development of ‘catastrophe’ models to predict better the impact of natural hazards. Communicating modelling results to end users who are often not specialist modellers is also an emerging area of research addressed within the volume. Also included are papers that highlight current developments of the technology platforms underpinning model fusion.

Author: Mesfin H. Tewolde
Publisher: Universal-Publishers
ISBN: 159942665X
Category :
Languages : en
Pages : 134

Get Book Here

Book Description
River stage or flow rates are required for the design and evaluation of hydraulic structures. Most river reaches are ungauged and a methodology is needed to estimate the stages, or rates of flow, at specific locations in streams where no measurements are available. Flood routing techniques are utilised to estimate the stages, or rates of flow, in order to predict flood wave propagation along river reaches. Models can be developed for gauged catchments and their parameters related to physical characteristics such as slope, reach width, reach length so that the approach can be applied to ungauged catchments in the region. The objective of this study is to assess Muskingum-based methods for flow routing in ungauged river reaches, both with and without lateral inflows. Using observed data, the model parameters were calibrated to assess performance of the Muskingum flood routing procedures and the Muskingum-Cunge method was then assessed using catchment derived parameters for use in ungauged river reaches. The Muskingum parameters were derived from empirically estimated variables and variables estimated from assumed river cross-sections within the selected river reaches used. Three sub-catchments in the Thukela catchment in KwaZulu-Natal, South Africa were selected for analyses, with river lengths of 4, 21 and 54 km. The slopes of the river reaches and reach lengths were derived from a digital elevation model. Manning roughness coefficients were estimated from field observations. Flow variables such as velocity, hydraulic radius, wetted perimeters, flow depth and top flow width were determined from empirical equations and cross-sections of the selected rivers. Lateral inflows to long river reaches were estimated from the Saint-Venant equation. Observed events were extracted for each sub-catchment to assess the Muskingum-Cunge parameter estimation method and Three-parameter Muskingum method. The extracted events were further analysed using empirically estimated flow variables. The performances of the methods were evaluated by comparing both graphically and statistically the simulated and observed hydrographs. Sensitivity analyses were undertaken using three selected events and a 50% variation in selected input variables was used to identify sensitive variables. The performance of the calibrated Muskingum-Cunge flood routing method using observed hydrographs displayed acceptable results. Therefore, the Muskingum-Cunge flood routing method was applied in ungauged catchments, with variables estimated empirically. The results obtained shows that the computed outflow hydrographs generated using the Muskingum-Cunge method, with the empirically estimated variables and variables estimated from cross-sections of the selected rivers resulted in reasonably accurate computed outflow hydrographs with respect to peak discharge, timing of peak flow and volume. From this study, it is concluded that the Muskingum-Cunge method can be applied to route floods in ungauged catchments in the Thukela catchment and it is postulated that the method can be used to route floods in other ungauged rivers in South Africa.

Author: Rafael Murillo Munoz
Publisher: CRC Press
ISBN: 1466584173
Category : Science
Languages : en
Pages : 1364

Get Book Here

Book Description
Containing the most recent theoretical accomplishments, numerical developments, experimental investigations and field studies in Fluvial Hydraulics, River Flow 2012 is an excellent resource for researchers, civil and environmental engineers, and practitioners in river-related disciplines.

Author:
Publisher:
ISBN:
Category : Hydrology
Languages : en
Pages : 306

Get Book Here

Book Description

Author:
Publisher:
ISBN:
Category : HEC-5 (Computer program)
Languages : en
Pages : 846

Get Book Here

Book Description

Author: Ram S. Gupta
Publisher: Waveland Press
ISBN: 1478634219
Category : Technology & Engineering
Languages : en
Pages : 902

Get Book Here

Book Description
For more than 25 years, the multiple editions of Hydrology & Hydraulic Systems have set the standard for a comprehensive, authoritative treatment of the quantitative elements of water resources development. The latest edition extends this tradition of excellence in a thoroughly revised volume that reflects the current state of practice in the field of hydrology. Widely praised for its direct and concise presentation, practical orientation, and wealth of example problems, Hydrology & Hydraulic Systems presents fundamental theories and concepts balanced with excellent coverage of engineering applications and design. The Fourth Edition features a major revision of the chapter on distribution systems, as well as a new chapter on the application of remote sensing and computer modeling to hydrology. Outstanding features of the Fourth Edition include . . . • More than 350 illustrations and 200 tables • More than 225 fully solved examples, both in FPS and SI units • Fully worked-out examples of design projects with realistic data • More than 500 end-of-chapter problems for assignment • Discussion of statistical procedures for groundwater monitoring in accordance with the EPA’s Unified Guidance • Detailed treatment of hydrologic field investigations and analytical procedures for data assessment, including the USGS acoustic Doppler current profiler (ADCP) approach • Thorough coverage of theory and design of loose-boundary channels, including the latest concept of combining the regime theory and the power function laws

Author: Hydrologic Engineering Center (U.S.)
Publisher:
ISBN:
Category : Hydrology
Languages : en
Pages : 74

Get Book Here

Book Description

Author:
Publisher:
ISBN:
Category : Hydrology
Languages : en
Pages : 708

Get Book Here

Book Description