X-Band Photonic Band-Gap Accelerator Structure Breakdown Experiment PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download X-Band Photonic Band-Gap Accelerator Structure Breakdown Experiment PDF full book. Access full book title X-Band Photonic Band-Gap Accelerator Structure Breakdown Experiment by . Download full books in PDF and EPUB format.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 11
Get Book Here
Book Description
In order to understand the performance of photonic band-gap (PBG) structures under realistic high gradient, high power, high repetition rate operation, a PBG accelerator structure was designed and tested at X band (11.424 GHz). The structure consisted of a single test cell with matching cells before and after the structure. The design followed principles previously established in testing a series of conventional pillbox structures. The PBG structure was tested at an accelerating gradient of 65 MV/m yielding a breakdown rate of two breakdowns per hour at 60 Hz. An accelerating gradient above 110 MV/m was demonstrated at a higher breakdown rate. Significant pulsed heating occurred on the surface of the inner rods of the PBG structure, with a temperature rise of 85 K estimated when operating in 100 ns pulses at a gradient of 100 MV/m and a surface magnetic field of 890 kA/m. A temperature rise of up to 250 K was estimated for some shots. The iris surfaces, the location of peak electric field, surprisingly had no damage, but the inner rods, the location of the peak magnetic fields and a large temperature rise, had significant damage. Breakdown in accelerator structures is generally understood in terms of electric field effects. These PBG structure results highlight the unexpected role of magnetic fields in breakdown. The hypothesis is presented that the moderate level electric field on the inner rods, about 14 MV/m, is enhanced at small tips and projections caused by pulsed heating, leading to breakdown. Future PBG structures should be built to minimize pulsed surface heating and temperature rise.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 11
Get Book Here
Book Description
In order to understand the performance of photonic band-gap (PBG) structures under realistic high gradient, high power, high repetition rate operation, a PBG accelerator structure was designed and tested at X band (11.424 GHz). The structure consisted of a single test cell with matching cells before and after the structure. The design followed principles previously established in testing a series of conventional pillbox structures. The PBG structure was tested at an accelerating gradient of 65 MV/m yielding a breakdown rate of two breakdowns per hour at 60 Hz. An accelerating gradient above 110 MV/m was demonstrated at a higher breakdown rate. Significant pulsed heating occurred on the surface of the inner rods of the PBG structure, with a temperature rise of 85 K estimated when operating in 100 ns pulses at a gradient of 100 MV/m and a surface magnetic field of 890 kA/m. A temperature rise of up to 250 K was estimated for some shots. The iris surfaces, the location of peak electric field, surprisingly had no damage, but the inner rods, the location of the peak magnetic fields and a large temperature rise, had significant damage. Breakdown in accelerator structures is generally understood in terms of electric field effects. These PBG structure results highlight the unexpected role of magnetic fields in breakdown. The hypothesis is presented that the moderate level electric field on the inner rods, about 14 MV/m, is enhanced at small tips and projections caused by pulsed heating, leading to breakdown. Future PBG structures should be built to minimize pulsed surface heating and temperature rise.
Author: JieXi Zhang
Publisher:
ISBN:
Category :
Languages : en
Pages : 217
Get Book Here
Book Description
This thesis reports the first high power tests of a hybrid photonic band gap (PBG) accelerator structure. PBG structures can support a single electromagnetic mode, thus damping higher-order modes (HOMs) generated by wakefields. We have designed, built and successfully tested a 17.14 GHz hybrid PBG (HPBG) structure containing both dielectric and metallic elements. Dielectric elements have low loss and the potential to survive high surface electromagnetic fields. The HPBG structure was constructed as a triangular lattice array with sapphire rods inside and copper rods outside sandwiched between copper plates. The lattice parameter and the rod pattern were adjusted to excite a high-Q TM0 2 mode and to suppress HOMs. This overmoded operation is a unique and novel feature of the hybrid design. The design included the birefringence of sapphire. Simulations showed relatively high surface fields at the triple point where sapphire, copper and vacuum meet as well as in any gaps between components in the clamped assembly. Three structures were tested with later structures designed to sequentially reduce the surface electric field. The third structure used sapphire rods with pin extensions at each end and obtained the highest gradient of 19 MV/m, corresponding to a surface E field of 78 MV/m, with a breakdown probability of 5 x 10 1 /pulse/m in 45-ns pulses. Operation above 20 MV/m gradient led to runaway breakdowns with extensive light emission and eventual damage. For all three structures, multipactor light emission was observed at gradients well below the breakdown threshold. Breakdown damage was found at the triple point where surface fields peaked. The deposition of copper onto sapphire resulting from breakdowns might eventually degrade the cavity quality. This research indicated that multipactor triggered at the triple point limited the operational gradient of the hybrid structure. These experiments represent the first high power tests of a hybrid PBG structure. The gradient achieved of 19 MV/m is the highest achieved with a dielectric structure. The gradient was found to be limited by multipactor and breakdown. The overmoded cavity with relatively large beam apertures might still find applications at high frequency or in high current transmission.
Author: Jiahang Shao
Publisher: Springer
ISBN: 9811079269
Category : Science
Languages : en
Pages : 142
Get Book Here
Book Description
This book mainly focuses on the experimental research of rf breakdown and field emission with novel methods, including triggering rf breakdown with high intensity laser and pin-shaped cathodes as well as locating field emitters with a high resolution in-situ imaging system. With these methods, this book has analyzed the power flow between cells during rf breakdown, observed the evolution of field emission during rf conditioning and the dependence of field emission on stored energy, and studied the field emitter distribution and origination. The research findings greatly expand the understanding of rf breakdown and field emission, which will in turn benefit future study into electron sources, particle accelerators, and high gradient rf devices in general.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
In this paper, we report the design, fabrication, and high gradient testing of a 17.1 GHz photonic band-gap (PBG) accelerator structure. Photonic band-gap (PBG) structures are promising candidates for electron accelerators capable of high-gradient operation because they have the inherent damping of high order modes required to avoid beam breakup instabilities. The 17.1 GHz PBG structure tested was a single cell structure composed of a triangular array of round copper rods of radius 1.45 mm spaced by 8.05 mm. The test assembly consisted of the test PBG cell located between conventional (pillbox) input and output cells, with input power of up to 4 MW from a klystron supplied via a TM01 mode launcher. Breakdown at high gradient was observed by diagnostics including reflected power, downstream and upstream current monitors and visible light emission. The testing procedure was first benchmarked with a conventional disc-loaded waveguide structure, which reached a gradient of 87 MV=m at a breakdown probability of 1.19 × 10-1 per pulse per meter. The PBG structure was tested with 100 ns pulses at gradient levels of less than 90 MV=m in order to limit the surface temperature rise to 120 K. The PBG structure reached up to 89 MV=m at a breakdown probability of 1.09 × 10-1 per pulse per meter. These test results show that a PBG structure can simultaneously operate at high gradients and low breakdown probability, while also providing wakefield damping.
Author: Brian James Munroe
Publisher:
ISBN:
Category :
Languages : en
Pages : 185
Get Book Here
Book Description
Photonic band-gap (PBG) structures are promising candidates for electron accelerators capable of high-gradient operation because they have the inherent damping of high order modes required to avoid beam breakup due to instabilities. A key challenge for PBG structures is high-gradient operation without structure damage due to rf-field-induced breakdowns. This thesis reports theoretical results on the design of PBG structures and the generation of wakefields in such structures. It also reports experimental results on PBG structure breakdown testing at high power at both 11 and 17 GHz. A single-cell photonic band-gap (PBG) structure was designed with an inner row of elliptical rods (PBG-E) to reduce ohmic heating relative to a round-rod structure. The PBG-E structure was built and tested at high power at a 60 Hz repetition rate at X-Band (11.424 GHz) at the SLAC accelerator test stand, achieving a gradient of 128 MV/m at a breakdown probability of 3.6 x 10-3 per pulse per meter at a pulse length of 150 ns. The PBG-E structure showed major improvement in breakdown rate relative to a round-rod PBG structure designed at MIT and previously tested at SLAC. A test stand was designed and built at MIT for testing single-cell structures at 17.1 GHz, a frequency 50% higher than the SLAC frequency. This test stand provides comparable diagnostics to those used at SLAC, adding optical diagnostic access which can be used for open PBG structures. A conventional disc-loaded waveguide structure, MIT-DLWG, was tested at MIT at up to a 2 Hz repetition rate. This structure reached a maximum gradient of 87 MV/m at a breakdown probability of 1.19 x 10-1 per pulse per meter. A round-rod PBG structure, MIT-PBG-2, has also been tested at MIT at up to a 2 Hz repetition rate and 100 ns pulse length, demonstrating operation up to 89 MV/rn at a breakdown probability of 1.09 x 10-1 per pulse per meter. These test results show that a PBG structure can simultaneously operate at high gradients and low breakdown probability, while also providing wakefield damping. This makes PBG structures viable candidates for future collider applications.
Author: Evgenya I. Smirnova
Publisher:
ISBN:
Category :
Languages : en
Pages : 184
Get Book Here
Book Description
In this thesis I present the design and experimental demonstration of the first photonic band gap (PBG) accelerator at 17.140 GHz. A photonic band gap structure is a one-, two- or three-dimensional periodic metallic and/or dielectric system (for example, of rods), which acts like a filter, reflecting rf fields in some frequency range and allowing rf fields at other frequencies to transmit through. Metal PBG structures are attractive for the Ku-band accelerators, because they can be employed to suppress wakefields. Wakefields are unwanted modes affecting the beam propagation or even destroying the beam. Suppression of wakefields is important. In this thesis, the theory of metallic PBG structures is explained and the Photonic Band Gap Structure Simulator (PBGSS) code is presented. PBGSS code was well benchmarked and the ways to'benchmark the code are described. Next, the concept of a PBG resonator is introduced. PBG resonators were modelled with Ansoft HFSS code, and a single-mode PBG resonator was designed. The HFSS design of a travelling-wave multi- cell PBG structure was performed. The multicell structure was built, cold-tested and tuned. Finally, the hot-test PBG accelerator demonstration was performed at the accelerator laboratory. The PBG accelerating structure was installed inside a vacuum chamber on the Haimson Research Corporation (HRC) accelerator beam line and powered with 2 MW from the HRC klystron. The electron bunches were produced by the HRC accelerator. The electron beam was accelerated by 1.4 MeV inside the PBG structure.
Author: Robert Siemann
Publisher:
ISBN:
Category :
Languages : en
Pages : 7
Get Book Here
Book Description
In the laser acceleration project E-163 at the Stanford Linear Accelerator Center, work is being done toward building a traveling wave accelerator that uses as its accelerating structure a length of photonic band gap fiber. The small scale of the optical fiber allows radiation at optical wavelengths to be used to provide the necessary accelerating energy. Optical wavelength driving energy in a small structure yields higher accelerating fields. The existence of a speed-of-light accelerating mode in a photonic band gap fiber has been calculated previously [1]. This paper presents an overview of several of the experimental challenges posed in the development of the proposed photonic band gap fiber accelerator system.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
We report experimental observation of higher order mode (HOM) wakefield suppression in a room-temperature traveling-wave photonic band gap (PBG) accelerating structure at 11.700 GHz. It has been long recognized that PBG structures have potential for reducing long-range wakefields in accelerators. The first ever demonstration of acceleration in a room-temperature PBG structure was conducted in 2005. Since then, the importance of PBG accelerator research has been recognized by many institutions. However, the full experimental characterization of the wakefield spectrum and demonstration of wakefield suppression when the accelerating structure is excited by an electron beam has not been performed to date. We conducted an experiment at the Argonne Wakefield Accelerator (AWA) test facility and observed wakefields excited by a single high charge electron bunch when it passes through a PBG accelerator structure. Lastly, excellent HOM suppression properties of the PBG accelerator were demonstrated in the beam test.
Author: Manoel Conde
Publisher: American Institute of Physics
ISBN: 9780735403789
Category : Science
Languages : en
Pages : 954
Get Book Here
Book Description
This workshop covered the general field of advanced particle accelerators, exploring the science and technology of a multitude of novel acceleration schemes. Various schemes under study utilize combinations of plasmas, laser beams, dielectric materials, and RF power. The development of technologies that will enable the design of future high energy physics machines is the underlying goal of this workshop.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 12
Get Book Here
Book Description
We report on the current status of our program to apply Photonic Band Gap (PBG) concepts to produce novel high-energy, high-intensity accelerator cavities. The PBG design on which we have concentrated our initial efforts consists of a square array of metal cylinders, terminated by conducting or superconducting sheets, and surrounded by microwave absorber on the periphery of the structure. A removed cylinder from the center of the array constitutes a site defect where a localized electromagnetic mode can occur. In previous work, we have proposed that this structure could be utilized as an accelerator cavity, with advantageous properties over conventional cavity designs. In the present work, we present further studies, including MAFIA-based numerical calculations and experimental measurements, demonstrating the feasibility of using the proposed structure in a real accelerator application.
