Author:
Publisher:
ISBN:
Category : Aluminum oxide
Languages : en
Pages : 106
Book Description
The True Stress-strain Properties of Brittle Materials to 5000° F
Author:
Publisher:
ISBN:
Category : Aluminum oxide
Languages : en
Pages : 106
Book Description
Publisher:
ISBN:
Category : Aluminum oxide
Languages : en
Pages : 106
Book Description
The True Stress-Strain Properties of Brittle Materials to 5000F. Tenth Monthly Report
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Runs on the zirconia-coated graphite established that the ultimate strength of this material is 30 to 100% greater than previously reported. This greater strength was apparently obtained because the gas bearings eliminate all bending moments in the specimens and the radiant heating provides more even and measurable temperatures. The ultimate strength of one pyrolytic graphite specimen was found to be over 33,600 psi at 4000 deg F. The performance of the resistance-heated furnace was very satisfactory. The gas bearings were dismounted, cleaned, plated, and are being reinstalled. Some limit switches were added to the load frame to provide protection from overtravel. (auth).
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Runs on the zirconia-coated graphite established that the ultimate strength of this material is 30 to 100% greater than previously reported. This greater strength was apparently obtained because the gas bearings eliminate all bending moments in the specimens and the radiant heating provides more even and measurable temperatures. The ultimate strength of one pyrolytic graphite specimen was found to be over 33,600 psi at 4000 deg F. The performance of the resistance-heated furnace was very satisfactory. The gas bearings were dismounted, cleaned, plated, and are being reinstalled. Some limit switches were added to the load frame to provide protection from overtravel. (auth).
Determination of the True Stress-Strain Properties of Brittle Materials to 5000 F. Ninth Monthly Report
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The development of the system and techniques to permit determination of strains at right angle to the axis of loading in the specimen was continued. An additional optical system was developed to accept the lateral image of the gage points and project a vertical image of the same proportion to the apertures of the strain analyzer. Using a dummy specimen of steel in the load train, the automatic pressure control system for the gas-bearing universals was operated. A fluctuation of gas pressure occurred within the bearings. Multiple progressive fracture planes were observed throughout the gage length of fractured graphite and tungsten. (M.C.G.).
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The development of the system and techniques to permit determination of strains at right angle to the axis of loading in the specimen was continued. An additional optical system was developed to accept the lateral image of the gage points and project a vertical image of the same proportion to the apertures of the strain analyzer. Using a dummy specimen of steel in the load train, the automatic pressure control system for the gas-bearing universals was operated. A fluctuation of gas pressure occurred within the bearings. Multiple progressive fracture planes were observed throughout the gage length of fractured graphite and tungsten. (M.C.G.).
The True Stress-strain Properties of Brittle Materials to Very High Temperatures
Author:
Publisher:
ISBN:
Category : Aluminum oxide
Languages : en
Pages : 94
Book Description
Publisher:
ISBN:
Category : Aluminum oxide
Languages : en
Pages : 94
Book Description
The Tube Stress-Strain Properties of Brittle Materials to 5000 F. Sixth Monthly Report
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Additional furnace work using the 25-kw induction power supply indicated reliable long-time performance at 4500 deg F. The detailed check out of the prototype, flat, gas bearing was completed. Bearing operatlon was very stable at 0.0005-in. gap. The design of the spherical bearing was begun. The grips were checked with a single graphite specimen and indicated satisfactory performance with specimen failure at the anticipated ultimate stress. The loading system was assembled, aligned, and operational check out completed. Design study of the optical strain analyzer was continued. (auth).
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Additional furnace work using the 25-kw induction power supply indicated reliable long-time performance at 4500 deg F. The detailed check out of the prototype, flat, gas bearing was completed. Bearing operatlon was very stable at 0.0005-in. gap. The design of the spherical bearing was begun. The grips were checked with a single graphite specimen and indicated satisfactory performance with specimen failure at the anticipated ultimate stress. The loading system was assembled, aligned, and operational check out completed. Design study of the optical strain analyzer was continued. (auth).
Monthly Catalog of United States Government Publications, Cumulative Index
Author: United States. Superintendent of Documents
Publisher:
ISBN:
Category : United States
Languages : en
Pages : 1250
Book Description
Publisher:
ISBN:
Category : United States
Languages : en
Pages : 1250
Book Description
Monthly Catalog of United States Government Publications
Author: United States. Superintendent of Documents
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1248
Book Description
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1248
Book Description
U.S. Government Research Reports
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 216
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 216
Book Description
Nuclear Science Abstracts
Author:
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 1200
Book Description
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 1200
Book Description
Engineering Materials List
Author:
Publisher:
ISBN:
Category : Materials
Languages : en
Pages : 62
Book Description
Publisher:
ISBN:
Category : Materials
Languages : en
Pages : 62
Book Description