Suitability of Dynamic and Relaxation Tests for the Evaluation of Moisture Susceptibility of Asphalt Mixtures PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Suitability of Dynamic and Relaxation Tests for the Evaluation of Moisture Susceptibility of Asphalt Mixtures PDF full book. Access full book title Suitability of Dynamic and Relaxation Tests for the Evaluation of Moisture Susceptibility of Asphalt Mixtures by Edith Arambula. Download full books in PDF and EPUB format.
Author: Edith Arambula
Publisher:
ISBN:
Category : Asphalt
Languages : en
Pages : 15
Get Book Here
Book Description
The presence of waIn ter in asphalt pavements deteriorates their condition and causes distresses that result in high maintenance costs to state and federal agencies. The objective of this research was to execute dynamic and relaxation tests and evaluate their effectiveness in assessing moisture susceptibility of asphalt mixture specimens with different air void structures determined using X-ray computed tomography (CT) and conditioned using the modified Lottman procedure. The dynamic test consisted of the application of a sinusoidal cyclic compressive load on the specimen while maintaining the strain within a specified range. The relaxation test, performed in both direct tension and compression, consisted of the application of a constant static strain. A statistical analysis was used to study the effectiveness of the tests in evaluating the moisture susceptibility of the asphalt mixtures. The results showed that none of the tests (dynamic or relaxation) were consistent in differentiating between the moisture conditioned and unconditioned specimens or between the responses of the different mixtures within each condition. In addition, the results of the dynamic and relaxation tests were compared after applying different methods to convert frequency-domain data to time-domain data.
Author: Edith Arambula
Publisher:
ISBN:
Category : Asphalt
Languages : en
Pages : 15
Get Book Here
Book Description
The presence of waIn ter in asphalt pavements deteriorates their condition and causes distresses that result in high maintenance costs to state and federal agencies. The objective of this research was to execute dynamic and relaxation tests and evaluate their effectiveness in assessing moisture susceptibility of asphalt mixture specimens with different air void structures determined using X-ray computed tomography (CT) and conditioned using the modified Lottman procedure. The dynamic test consisted of the application of a sinusoidal cyclic compressive load on the specimen while maintaining the strain within a specified range. The relaxation test, performed in both direct tension and compression, consisted of the application of a constant static strain. A statistical analysis was used to study the effectiveness of the tests in evaluating the moisture susceptibility of the asphalt mixtures. The results showed that none of the tests (dynamic or relaxation) were consistent in differentiating between the moisture conditioned and unconditioned specimens or between the responses of the different mixtures within each condition. In addition, the results of the dynamic and relaxation tests were compared after applying different methods to convert frequency-domain data to time-domain data.
Author: Jaejun Lee
Publisher:
ISBN:
Category : Moisture conditioning
Languages : en
Pages : 9
Get Book Here
Book Description
A pothole is one of the distresses in asphalt pavement caused by the presence of water in the asphalt pavement and the presence of traffic passing over the affected area. Recently, lots of potholes were observed due to heavy rain in Korea. Thus, the indirect tensile strength ratio (TSR) is commonly used based on the AASHTO T 283 procedure to evaluate the moisture susceptibility of an asphalt mixture; however, TSR cannot be used as a representative index for the mechanical behavior of the moisture-conditioned asphalt mixture. In this study, the dynamic modulus |E*| laboratory test is applied as a replacement test for the TSR in order to assess the moisture susceptibility of four different asphalt mixtures. The dynamic modulus test is used to determine the % of retained stiffness, a term that was referred to as the dynamic modulus ratio (DMR). The results of both TSR and DMR conducted on the same mixtures are compared and statistically analyzed. The logistic regression model was used to evaluate the correlation between TSR and DMR. The correlation between TSR and DMR at 20°C is significant. However, there was no relation between TSR and DMR at other temperature ranges (5°C, 40°C, 54.4°C) because there was different viscoelastic behavior at different temperature.
Author: R. Christopher Williams
Publisher:
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 138
Get Book Here
Book Description
Pavements are subjected to different stresses during their design lives. A properly designed pavement will perform adequately during its design life, and the distresses will not exceed the allowable limits; however, there are several factors that can lead to premature pavement failure. One such factor is moisture sensitivity. AASHTO T 283 is the standard test used in the moisture susceptibility evaluation of asphalt mixtures, but the results of the test are not very representative of the expected behavior of asphalt mixtures. The dynamic modulus test measures a fundamental property of the mixture. The results of the dynamic modulus test can be used directly in the Mechanistic-Empirical Pavement Design Guide (MEPDG) and are considered a very good representation of the expected field performance of the mixture. Further research is still needed to study how the dynamic modulus results are affected by moisture. The flow number test was studied in previous research as a candidate test for moisture-susceptibility evaluation, but the results of that research were not favorable. This research has four main objectives. The first objective of this research is to evaluate the usefulness of the dynamic modulus and flow number tests in moisture-susceptibility evaluation. The second objective is to compare the results to those achieved using the AASHTO T 283 test. The third objective is to study the effect of different methods of sample conditioning and testing conditions. The fourth objective of the research is to study the variability in the test results.
Author: Mansour Solaimanian
Publisher: Transportation Research Board
ISBN: 0309099064
Category : Bituminous materials
Languages : en
Pages : 79
Get Book Here
Book Description
Explores whether combining the environmental conditioning system with the simple performance test would provide a superior procedure for determining the moisture susceptibility of hot-mix asphalt (HMA).
Author: Christopher J. DeCarlo
Publisher:
ISBN:
Category : Asphalt
Languages : en
Pages : 19
Get Book Here
Book Description
Asphalt materials experience substantial amounts of environmental damage throughout their lives as surface layers in pavements. One of the most prominent forms of environmental damage, moisture-induced damage, is caused by the weakening of internal bonds of the material because of the presence of moisture in the voids of asphalt mixtures and is a common problem for asphalt pavements in wet climates. Moisture-induced damage is typically accounted for during asphalt mixture design by conducting performance tests to ensure the material is not susceptible to severe damage from moisture, although many of these methods have seen mixed amounts of success historically. The main objective of this study is to evaluate the ability of multiple asphalt mixture moisture susceptibility tests to identify good and poor performing mixtures with respect to moisture-induced damage to replace current mix design testing requirements. Ten plant-produced hot mix asphalt materials with established good and poor field moisture performance were subjected to various moisture susceptibility test methods. The results from these procedures are assessed to determine which procedure is most effective and practical as a moisture susceptibility test for routine usage during asphalt mixture design for transportation agencies. Results from this study suggest that performance tests with stiffness-based measurements, such as dynamic modulus paired with moisture conditioning and the saturated aging tensile stiffness procedure, show better correlation to field performance than traditional test methods such as AASHTO T-283, Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage, and that the Hamburg wheel tracker test is the most effective and practical test method to reliably identify mixtures prone to experiencing moisture-induced damage.
Author: Amy Epps Martin
Publisher: Transportation Research Board
ISBN: 030928368X
Category : Technology & Engineering
Languages : en
Pages : 109
Get Book Here
Book Description
"TRB's National Cooperative Highway Research Program (NCHRP) Report 763: Evaluation of the Moisture Susceptibility of WMA Technologies presents proposed guidelines for identifying potential moisture susceptibility in warm mix asphalt (WMA). The report also suggests potential revisions to the Appendix to AASHTO R 35, "Special Mixture Design Considerations and Methods for WMA" as a means to implement the guidelines."--publisher's description
Author: Kevin D. Stuart
Publisher:
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 36
Get Book Here
Book Description
Procedures for evaluating the moisture susceptibility of asphalt mixtures were compared by performing them on mixtures having a known history of susceptibility. Data included the retained ratios, visual stripping, mechanical values (tensile strength, stability, etc.), saturation, and swell. The most promising procedures appeared to be the NCHRP 246 and NCHRP 274.
Author: Brian Gregory Birdsall
Publisher:
ISBN:
Category : Asphalt concrete
Languages : en
Pages : 250
Get Book Here
Book Description
Author: Elizabeth Rae Hunter
Publisher:
ISBN:
Category : Frost
Languages : en
Pages : 164
Get Book Here
Book Description
This research project utilized laboratory evaluations to study effects of freeze-thaw cycling on the tensile strength of eight Hot Mix Asphalt mixtures and to determine if the Georgia Loaded Wheel Tester could be utilized to measure moisture susceptibility of Hot Mix Asphalt mixtures. The evaluation involved eight Hot Mix Asphalt mixtures from combinations of two aggregate types and four asphalt-additive-aging possibilities. Laboratory testing was accomplished in the first phase with the production of 2.5 by 4 inch cores that were freeze-thaw cycled and tested for their indirect tensile strength following Wyoming modified AASHTO T283. The second phase was accomplished using 3 by 6 inch cores that were conditioned and tested for rutting using the Georgia Loaded Wheel Tester. Finally, a statistical analysis was performed to determine if performance of the various mixtures was significantly different in groups of asphalt types and to determine if the Georgia Loaded Wheel Tester was a viable measurement tool for moisture susceptibility.
Author: Sunghwan Kim
Publisher:
ISBN:
Category : Pavements, Asphalt
Languages : en
Pages : 70
Get Book Here
Book Description
Even though moisture sensitivity of Hot Mix Asphalt (HMA) mixtures has been recognized as a major form of distress in asphalt concrete pavements since the advent of asphalt paving technology, the mechanism of this problem has not been clearly identified until now. However, it has been agreed that it can be characterized by the loss of adhesive bond between the asphalt binder and the aggregate or by a softening of the cohesive bonds within the asphalt binder, both of which are due to the action of loading under traffic in the presence of moisture. The evaluation of Hot Mix Asphalt moisture sensitivity has been divided into two categories: visual inspection test and mechanical test. However, most of them have been developed in pre-Superpave mix design. This research was conducted to develop a new test protocol which can overcome the problems of the current procedures and to evaluate the possibility of using the Nottingham Asphalt Tester (NAT) in the resulting procedure.
