Service Maintenance of SAE J1703 and J1704 Brake Fluids in Motor Vehicle Brake Systems PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Service Maintenance of SAE J1703 and J1704 Brake Fluids in Motor Vehicle Brake Systems PDF full book. Access full book title Service Maintenance of SAE J1703 and J1704 Brake Fluids in Motor Vehicle Brake Systems by Brake Fluids Standards Committee. Download full books in PDF and EPUB format.
Author: Brake Fluids Standards Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This SAE Recommended Practice provides basic recommendations for dispensing and handling of SAE J1703 and SAE J1704 Brake Fluids by Service Maintenance Personnel to assure their safe and effective performance when installed in or added to motor vehicle hydraulic brake actuating systems. This document is concerned only with brake fluid and those system parts in contact with it. It describes general maintenance procedures that constitute good practice and that should be employed to help assure a properly functioning brake system. Recommendations that promote safety are emphasized. Specific step-by-step service instructions for brake maintenance on individual makes or models are neither intended nor implied. For these, one should consult the vehicle manufacturer's service brake maintenance procedures for the particular vehicle. Vehicle manufacturer's recommendations should always be followed.
Author: Brake Fluids Standards Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This SAE Recommended Practice provides basic recommendations for dispensing and handling of SAE J1703 and SAE J1704 Brake Fluids by Service Maintenance Personnel to assure their safe and effective performance when installed in or added to motor vehicle hydraulic brake actuating systems. This document is concerned only with brake fluid and those system parts in contact with it. It describes general maintenance procedures that constitute good practice and that should be employed to help assure a properly functioning brake system. Recommendations that promote safety are emphasized. Specific step-by-step service instructions for brake maintenance on individual makes or models are neither intended nor implied. For these, one should consult the vehicle manufacturer's service brake maintenance procedures for the particular vehicle. Vehicle manufacturer's recommendations should always be followed.
Author: Brake Fluids Standards Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This SAE Recommended Practice provides basic recommendations for dispensing and handling of SAE J1703 and SAE J1704 Brake Fluids by Service Maintenance Personnel to assure their safe and effective performance when installed in or added to motor vehicle hydraulic brake actuating systems.This document is concerned only with brake fluid and those system parts in contact with it. It describes general maintenance procedures that constitute good practice and that should be employed to help assure a properly functioning brake system. Recommendations that promote safety are emphasized. Specific step-by-step service instructions for brake maintenance on individual makes or models are neither intended nor implied. For these, one should consult the vehicle manufacturer's service brake maintenance procedures for the particular vehicle. Vehicle manufacturer's recommendations should always be followed. This limited scope revision includes updating the title of SAE J1704 in the reference section.
Author: Brake Fluids Standards Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This SAE Recommended Practice provides basic recommendations for dispensing and handling of J1703 Brake Fluids by Service Maintenance Personnel to assure their safe and effective performance when installed in or added to motor vehicle hydraulic brake actuating systems. This document is concerned only with brake fluid and those system parts in contact with it. It describes general maintenance procedures that constitute good practice and that should be employed to help assure a properly functioning brake system. Recommendations that promote safety are emphasized. Specific step-by-step service instructions for brake maintenance on individual makes or models are neither intended nor implied. For these, one should consult the vehicle manufacturer's service brake maintenance procedures for the particular vehicle. Vehicle manufacturer's recommendations should always be followed.
Author: Brake Fluids Standards Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This SAE Standard covers motor vehicle brake fluids of the nonpetroleum type, based upon glycols, glycolethers and appropriate inhibitors, for use in the braking system of any motor vehicle such as a passenger car, truck, bus, or trailer. These fluids are not intended for use under arctic conditions. These fluids are designed for use in braking systems fitted with rubber cups and seals made from styrene-butadiene rubber (SBR), or a terpolymer of ethylene, propylene, and a diene (EPDM). Document revision was considered necessary to harmonize SAE J1703 and the SAE J1704 specification.Appendix C is further expanded to include information on the Rubber Test Cups (RM-3a) in Section C.4, for their preparation, handling, and storage, and Figure C1, for their design dimensions for the rubber cups.Specification requirements are made clearer and easier to find using a tabulated format.Greater specification detail is given for the referee materials used in the test methods and issued in a separate document to make future document revisions simpler.The stroking test has been withdrawn as it no longer reflects current technology. However, it is considered important that this draft include archival information on the test and its' characteristics, should the test be redesigned for modern and future technologies. See Appendix G.
Author: Brake Fluids Standards Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This SAE Recommended Practice is intended to provide basic recommended practices for aid in the development and use of safe and efficient practices for all operations involving the production, handling, and dispensing of SAE J1703 motor vehicle brake fluids and SAE J1704 borate ester-based brake fluids. This SAE Recommended Practice has been revised to replace the RM66-06 reference fluid with the RM66-07 reference fluid.
Author: Brake Fluids Standards Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This SAE Recommended Practice is intended to provide basic recommended practices for aid in the development and use of safe and efficient practices for all operations involving the production, handling, and dispensing of SAE J1703 Motor Vehicle Brake Fluids and SAE J1704 Borate Ester Based Brake Fluids. 3.2 Added text to align with J1707 paragraph 3.3.1 3.3 Added text to align with J1707 paragraph 3.3.4Removed description of RM-66-05 fluid composition which was not removed with the RM-66-05 to RM-66-06 change.
Author: Brake Fluids Standards Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This SAE Recommended Practice is intended to provide basic recommendations to aid in the development and use of safe and efficient practices for all operations involving the production, handling, and dispensing of SAE J1703 motor vehicle brake fluids.
Author: Brake Fluids Standards Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This SAE Recommended Practice was prepared to provide engineers, designers, and manufacturers of motor vehicles with a set of minimum performance requirements in order to assess the suitability of silicone and other low water tolerant type brake fluids (LWTFs) for use in motor vehicle brake systems. These fluids are designed for use in braking systems fitted with rubber cups and seals made from styrene-butadiene rubber (SBR), or a terpolymer of ethylene, propylene, and a diene (EPDM).In the development of the recommended requirements and test procedures contained herein, it is concluded that the LWTFs must be functionally compatible with braking systems designed for SAE J1703 and SAE J1704 fluids. To utilize LWTFs to the fullest advantage, they should not be mixed with other brake fluids. Inadvertent mixtures of LWTFs with fluids meeting SAE J1703 are not known to have any adverse effects on performance, but not all combinations have been tested. Vehicle manufacturer's recommendations should be followed where indicated. These fluids are not necessarily suitable for use in central hydraulic or pumped systems and are not intended for use below temperatures of -50 °C (-58 °F). Brake fluids covered under this document are not required to tolerate water and extreme caution should be exercised to prevent accidental entry of water which might lead to brake failure. Other performance characteristics of these LWTFs not covered in this document are discussed in Appendix A. This document has been edited to bring it back to revised and current status. This edit includes replacing Section 3 with a test procedures and requirements table similar to the formatting found in SAE J1703 and SAE J1704.
Author: George E. Totten
Publisher: CRC Press
ISBN: 1420003844
Category : Technology & Engineering
Languages : en
Pages : 1219
Get Book Here
Book Description
When it was first published some two decades ago, the original Handbook of Lubrication and Tribology stood on technology's cutting-edge as the first comprehensive reference to assist the emerging science of tribology lubrication. Later, followed by Volume II, Theory and Design and Volume III, Monitoring, Materials, Synthetic Lubricants, and Ap
Author: Brake Fluids Standards Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
Motor vehicle brake fluid must conform to the requirements of SAE J1703 or J1704, not only when manufactured, but also after extended storage in any commercial packaging container. The purpose of this SAE Information Report is to generate an awareness of the major problems involved in the storage of brake fluids and, to some extent, provide means of circumventing them. It is also the purpose of this document to relate to experience and to test data accumulated and to list certain conclusions which should aid in the proper selection of containers for brake fluid. This document has been reaffirmed to comply with the SAE 5-Year Review policy.
