Author: Xinbo Ruan
Publisher: Springer Nature
ISBN: 9811915474
Category : Technology & Engineering
Languages : en
Pages : 304
Book Description
Two-stage single-phase converters, including two-stage single-phase dc-ac inverters and two-stage single-phase PFC converters, are interfacing power converters between dc and ac voltage/current sources, which have been widely applied for dc-ac and ac-dc power conversion. For the two-stage single-phase converter, the ac-side power pulsates at twice the ac voltage frequency, resulting in second harmonic current (SHC) which might flow into the dc-dc converter, the dc voltage source, and dc load. This book clarifies the generation, propagation, and side-effects of this SHC and proposes the SHC reduction control schemes for the dc-dc converter, with different topologies and/or different operating modes, in the single-phase converter. On this basis, the second harmonic current compensator (SHCC) is proposed to compensate the SHC, significantly reducing the dc bus capacitance. In doing so, the electrolytic capacitors, with short lifetimes, are removed from the two-stage single-phase converter, leading to extended system lifetime and enhanced system stability. For having flawless SHC compensation performance, the port-current control schemes are proposed for the SHCC. Additionally, the stability analysis is carried out for the two-stage single-phase converter with the addition of SHCC. This book is a monograph combining theoretical analysis and engineering design, which could not only be a reference book for master students, Ph.D. students, and teachers majoring in power electronics but also be a handbook for the electrical engineers working on the research and development of LED drivers, EV on-board chargers, railway auxiliary power supplies, aviation power supplies, renewable energy generation systems, etc.
Second Harmonic Current Reduction Techniques for Single-Phase Power Electronics Converter Systems
Author: Xinbo Ruan
Publisher: Springer Nature
ISBN: 9811915474
Category : Technology & Engineering
Languages : en
Pages : 304
Book Description
Two-stage single-phase converters, including two-stage single-phase dc-ac inverters and two-stage single-phase PFC converters, are interfacing power converters between dc and ac voltage/current sources, which have been widely applied for dc-ac and ac-dc power conversion. For the two-stage single-phase converter, the ac-side power pulsates at twice the ac voltage frequency, resulting in second harmonic current (SHC) which might flow into the dc-dc converter, the dc voltage source, and dc load. This book clarifies the generation, propagation, and side-effects of this SHC and proposes the SHC reduction control schemes for the dc-dc converter, with different topologies and/or different operating modes, in the single-phase converter. On this basis, the second harmonic current compensator (SHCC) is proposed to compensate the SHC, significantly reducing the dc bus capacitance. In doing so, the electrolytic capacitors, with short lifetimes, are removed from the two-stage single-phase converter, leading to extended system lifetime and enhanced system stability. For having flawless SHC compensation performance, the port-current control schemes are proposed for the SHCC. Additionally, the stability analysis is carried out for the two-stage single-phase converter with the addition of SHCC. This book is a monograph combining theoretical analysis and engineering design, which could not only be a reference book for master students, Ph.D. students, and teachers majoring in power electronics but also be a handbook for the electrical engineers working on the research and development of LED drivers, EV on-board chargers, railway auxiliary power supplies, aviation power supplies, renewable energy generation systems, etc.
Publisher: Springer Nature
ISBN: 9811915474
Category : Technology & Engineering
Languages : en
Pages : 304
Book Description
Two-stage single-phase converters, including two-stage single-phase dc-ac inverters and two-stage single-phase PFC converters, are interfacing power converters between dc and ac voltage/current sources, which have been widely applied for dc-ac and ac-dc power conversion. For the two-stage single-phase converter, the ac-side power pulsates at twice the ac voltage frequency, resulting in second harmonic current (SHC) which might flow into the dc-dc converter, the dc voltage source, and dc load. This book clarifies the generation, propagation, and side-effects of this SHC and proposes the SHC reduction control schemes for the dc-dc converter, with different topologies and/or different operating modes, in the single-phase converter. On this basis, the second harmonic current compensator (SHCC) is proposed to compensate the SHC, significantly reducing the dc bus capacitance. In doing so, the electrolytic capacitors, with short lifetimes, are removed from the two-stage single-phase converter, leading to extended system lifetime and enhanced system stability. For having flawless SHC compensation performance, the port-current control schemes are proposed for the SHCC. Additionally, the stability analysis is carried out for the two-stage single-phase converter with the addition of SHCC. This book is a monograph combining theoretical analysis and engineering design, which could not only be a reference book for master students, Ph.D. students, and teachers majoring in power electronics but also be a handbook for the electrical engineers working on the research and development of LED drivers, EV on-board chargers, railway auxiliary power supplies, aviation power supplies, renewable energy generation systems, etc.
Microgrids and Local Energy Systems
Author: Nick Jenkins
Publisher: BoD – Books on Demand
ISBN: 1789845300
Category : Technology & Engineering
Languages : en
Pages : 206
Book Description
This book addresses important topical questions of microgrids and local energy systems. It begins with an investigation of the electrical protection of microgrids followed by a study of the power converters used and the utilization of multi-objective optimization for the selection of component ratings. Subsequent chapters address peer-to-peer energy trading in microgrids, local district heating and cooling systems, neighborhood generators used to supplement the utility electricity supplies in Iraq, and regulatory impediments to micro-wind generation in the United States.
Publisher: BoD – Books on Demand
ISBN: 1789845300
Category : Technology & Engineering
Languages : en
Pages : 206
Book Description
This book addresses important topical questions of microgrids and local energy systems. It begins with an investigation of the electrical protection of microgrids followed by a study of the power converters used and the utilization of multi-objective optimization for the selection of component ratings. Subsequent chapters address peer-to-peer energy trading in microgrids, local district heating and cooling systems, neighborhood generators used to supplement the utility electricity supplies in Iraq, and regulatory impediments to micro-wind generation in the United States.
Artificial Intelligence-based Smart Power Systems
Author: Sanjeevikumar Padmanaban
Publisher: John Wiley & Sons
ISBN: 1119893968
Category : Science
Languages : en
Pages : 404
Book Description
Authoritative resource describing the artificial intelligence and advanced technologies in smart power systems with simulation examples and case studies Artificial Intelligence-based Smart Power Systems presents advanced technologies used in various aspects of smart power systems, especially grid-connected and industrial evolution, covering many new topics such as distribution Phasor management, blockchain technologies for smart power systems, the application of deep learning and reinforced learning, and artificial intelligence techniques. The text also explores the potential consequences of artificial intelligence and advanced technologies in smart power systems in the forthcoming years. To enhance and reinforce learning, the highly qualified editors include many learning resources throughout the text, including MATLAB and HIL codes, end-of-chapter problems, end-of-book solutions, practical examples, and case studies. Artificial Intelligence-based Smart Power Systems includes specific information on topics such as: Modeling and analysis of smart power systems, covering steady state analysis, dynamic analysis, voltage stability, and more Recent advancement in power electronics for smart power systems, covering power electronic converters for renewable energy sources, electric vehicles, and HDVC/FACTs Distribution Phasor Measurement Units (PMU) in smart power systems, covering the need for PMU in distribution and automation of system reconfigurations Power and energy management systems for microgrids Engineering colleges and universities, along with industry research centers, can use the in-depth subject coverage and the extensive supplementary learning resources found in Artificial Intelligence-based Smart Power Systems to gain a holistic understanding of the subject and be able to harness that knowledge within a myriad of practical applications.
Publisher: John Wiley & Sons
ISBN: 1119893968
Category : Science
Languages : en
Pages : 404
Book Description
Authoritative resource describing the artificial intelligence and advanced technologies in smart power systems with simulation examples and case studies Artificial Intelligence-based Smart Power Systems presents advanced technologies used in various aspects of smart power systems, especially grid-connected and industrial evolution, covering many new topics such as distribution Phasor management, blockchain technologies for smart power systems, the application of deep learning and reinforced learning, and artificial intelligence techniques. The text also explores the potential consequences of artificial intelligence and advanced technologies in smart power systems in the forthcoming years. To enhance and reinforce learning, the highly qualified editors include many learning resources throughout the text, including MATLAB and HIL codes, end-of-chapter problems, end-of-book solutions, practical examples, and case studies. Artificial Intelligence-based Smart Power Systems includes specific information on topics such as: Modeling and analysis of smart power systems, covering steady state analysis, dynamic analysis, voltage stability, and more Recent advancement in power electronics for smart power systems, covering power electronic converters for renewable energy sources, electric vehicles, and HDVC/FACTs Distribution Phasor Measurement Units (PMU) in smart power systems, covering the need for PMU in distribution and automation of system reconfigurations Power and energy management systems for microgrids Engineering colleges and universities, along with industry research centers, can use the in-depth subject coverage and the extensive supplementary learning resources found in Artificial Intelligence-based Smart Power Systems to gain a holistic understanding of the subject and be able to harness that knowledge within a myriad of practical applications.
Emerging Converter Topologies and Control for Grid Connected Photovoltaic Systems
Author: Dmitri Vinnikov
Publisher: MDPI
ISBN: 303943909X
Category : Technology & Engineering
Languages : en
Pages : 364
Book Description
Continuous cost reduction of photovoltaic (PV) systems and the rise of power auctions resulted in the establishment of PV power not only as a green energy source but also as a cost-effective solution to the electricity generation market. Various commercial solutions for grid-connected PV systems are available at any power level, ranging from multi-megawatt utility-scale solar farms to sub-kilowatt residential PV installations. Compared to utility-scale systems, the feasibility of small-scale residential PV installations is still limited by existing technologies that have not yet properly address issues like operation in weak grids, opaque and partial shading, etc. New market drivers such as warranty improvement to match the PV module lifespan, operation voltage range extension for application flexibility, and embedded energy storage for load shifting have again put small-scale PV systems in the spotlight. This Special Issue collects the latest developments in the field of power electronic converter topologies, control, design, and optimization for better energy yield, power conversion efficiency, reliability, and longer lifetime of the small-scale PV systems. This Special Issue will serve as a reference and update for academics, researchers, and practicing engineers to inspire new research and developments that pave the way for next-generation PV systems for residential and small commercial applications.
Publisher: MDPI
ISBN: 303943909X
Category : Technology & Engineering
Languages : en
Pages : 364
Book Description
Continuous cost reduction of photovoltaic (PV) systems and the rise of power auctions resulted in the establishment of PV power not only as a green energy source but also as a cost-effective solution to the electricity generation market. Various commercial solutions for grid-connected PV systems are available at any power level, ranging from multi-megawatt utility-scale solar farms to sub-kilowatt residential PV installations. Compared to utility-scale systems, the feasibility of small-scale residential PV installations is still limited by existing technologies that have not yet properly address issues like operation in weak grids, opaque and partial shading, etc. New market drivers such as warranty improvement to match the PV module lifespan, operation voltage range extension for application flexibility, and embedded energy storage for load shifting have again put small-scale PV systems in the spotlight. This Special Issue collects the latest developments in the field of power electronic converter topologies, control, design, and optimization for better energy yield, power conversion efficiency, reliability, and longer lifetime of the small-scale PV systems. This Special Issue will serve as a reference and update for academics, researchers, and practicing engineers to inspire new research and developments that pave the way for next-generation PV systems for residential and small commercial applications.
Power Electronics Applications in Renewable Energy Systems
Author: Gilsoo Jang
Publisher: MDPI
ISBN: 3039287001
Category : Technology & Engineering
Languages : en
Pages : 258
Book Description
The renewable generation system is currently experiencing rapid growth in various power grids. The stability and dynamic response issues of power grids are receiving attention due to the increase in power electronics-based renewable energy. The main focus of this Special Issue is to provide solutions for power system planning and operation. Power electronics-based devices can offer new ancillary services to several industrial sectors. In order to fully include the capability of power conversion systems in the network integration of renewable generators, several studies should be carried out, including detailed studies of switching circuits, and comprehensive operating strategies for numerous devices, consisting of large-scale renewable generation clusters.
Publisher: MDPI
ISBN: 3039287001
Category : Technology & Engineering
Languages : en
Pages : 258
Book Description
The renewable generation system is currently experiencing rapid growth in various power grids. The stability and dynamic response issues of power grids are receiving attention due to the increase in power electronics-based renewable energy. The main focus of this Special Issue is to provide solutions for power system planning and operation. Power electronics-based devices can offer new ancillary services to several industrial sectors. In order to fully include the capability of power conversion systems in the network integration of renewable generators, several studies should be carried out, including detailed studies of switching circuits, and comprehensive operating strategies for numerous devices, consisting of large-scale renewable generation clusters.
Advanced Control of Grid-Connected High-Power Converters
Author: Chenghui Zhang
Publisher: Springer Nature
ISBN: 9811989982
Category : Technology & Engineering
Languages : en
Pages : 279
Book Description
The high-power grid-connected converters play a vital role in modern power system, realizing the conversion and transmission of electrical energy, and determining its safety, stability and efficiency. This book explores the advanced control strategies of high-power grid-connected converter to satisfy the high-power requirements in practical applications. Special attention is given to grid-connected converter modules in parallel operation to overcome the challenges of non-ideal power grid, power switches faults, and circulating current. Through the advanced control strategies presented in this book, the power capacity of grid-connected converter is flexibly increased with high-reliability and efficiency, thus expanding the application range of high-power converters in modern power system. To facilitate understanding, this book provides step-by-step model derivation and controller design for grid-connected converter. Meanwhile, it also provides the comprehensive simulation and experimental results to offer readers a deep insight into the control process of grid-connected converters. This book serves as a guide for electrical engineers and researchers involved in the development of high-power converters.
Publisher: Springer Nature
ISBN: 9811989982
Category : Technology & Engineering
Languages : en
Pages : 279
Book Description
The high-power grid-connected converters play a vital role in modern power system, realizing the conversion and transmission of electrical energy, and determining its safety, stability and efficiency. This book explores the advanced control strategies of high-power grid-connected converter to satisfy the high-power requirements in practical applications. Special attention is given to grid-connected converter modules in parallel operation to overcome the challenges of non-ideal power grid, power switches faults, and circulating current. Through the advanced control strategies presented in this book, the power capacity of grid-connected converter is flexibly increased with high-reliability and efficiency, thus expanding the application range of high-power converters in modern power system. To facilitate understanding, this book provides step-by-step model derivation and controller design for grid-connected converter. Meanwhile, it also provides the comprehensive simulation and experimental results to offer readers a deep insight into the control process of grid-connected converters. This book serves as a guide for electrical engineers and researchers involved in the development of high-power converters.
Conference Record
Author: IEEE Industry Applications Society. Annual Meeting
Publisher:
ISBN:
Category : Electric power
Languages : en
Pages : 624
Book Description
Publisher:
ISBN:
Category : Electric power
Languages : en
Pages : 624
Book Description
IAS '96
Author: IEEE Industry Applications Society. Meeting
Publisher:
ISBN:
Category : Electrical engineering
Languages : en
Pages : 624
Book Description
Publisher:
ISBN:
Category : Electrical engineering
Languages : en
Pages : 624
Book Description
Handbook of Automotive Power Electronics and Motor Drives
Author: Ali Emadi
Publisher: CRC Press
ISBN: 135183679X
Category : Technology & Engineering
Languages : en
Pages : 909
Book Description
Initially, the only electric loads encountered in an automobile were for lighting and the starter motor. Today, demands on performance, safety, emissions, comfort, convenience, entertainment, and communications have seen the working-in of seemingly innumerable advanced electronic devices. Consequently, vehicle electric systems require larger capacities and more complex configurations to deal with these demands. Covering applications in conventional, hybrid-electric, and electric vehicles, the Handbook of Automotive Power Electronics and Motor Drives provides a comprehensive reference for automotive electrical systems. This authoritative handbook features contributions from an outstanding international panel of experts from industry and academia, highlighting existing and emerging technologies. Divided into five parts, the Handbook of Automotive Power Electronics and Motor Drives offers an overview of automotive power systems, discusses semiconductor devices, sensors, and other components, explains different power electronic converters, examines electric machines and associated drives, and details various advanced electrical loads as well as battery technology for automobile applications. As we seek to answer the call for safer, more efficient, and lower-emission vehicles from regulators and consumer insistence on better performance, comfort, and entertainment, the technologies outlined in this book are vital for engineering advanced vehicles that will satisfy these criteria.
Publisher: CRC Press
ISBN: 135183679X
Category : Technology & Engineering
Languages : en
Pages : 909
Book Description
Initially, the only electric loads encountered in an automobile were for lighting and the starter motor. Today, demands on performance, safety, emissions, comfort, convenience, entertainment, and communications have seen the working-in of seemingly innumerable advanced electronic devices. Consequently, vehicle electric systems require larger capacities and more complex configurations to deal with these demands. Covering applications in conventional, hybrid-electric, and electric vehicles, the Handbook of Automotive Power Electronics and Motor Drives provides a comprehensive reference for automotive electrical systems. This authoritative handbook features contributions from an outstanding international panel of experts from industry and academia, highlighting existing and emerging technologies. Divided into five parts, the Handbook of Automotive Power Electronics and Motor Drives offers an overview of automotive power systems, discusses semiconductor devices, sensors, and other components, explains different power electronic converters, examines electric machines and associated drives, and details various advanced electrical loads as well as battery technology for automobile applications. As we seek to answer the call for safer, more efficient, and lower-emission vehicles from regulators and consumer insistence on better performance, comfort, and entertainment, the technologies outlined in this book are vital for engineering advanced vehicles that will satisfy these criteria.
Proceedings of the Second International Conference on Emerging Trends in Engineering (ICETE 2023)
Author: Bhiksha Raj
Publisher: Springer Nature
ISBN: 9464632526
Category : Technology & Engineering
Languages : en
Pages : 1408
Book Description
This is an open access book. The 2nd International Conference on Emerging Trends in Engineering (ICETE 2023) will be held in-person from April 28-30, 2023 at University College of Engineering, Osmania University, Hyderabad, India. Since its inception in 2019, The International Conference on Emerging Trends in Engineering (ICETE) has established to enhance the information exchange of theoretical research and practical advancements at national and international levels in the fields of Bio-Medical, Civil, Computer Science, Electrical, Electronics & Communication Engineering, Mechanical and Mining Engineering. This encourages and promotes professional interaction among students, scholars, researchers, educators, professionals from industries and other groups to share latest findings in their respective fields towards sustainable developments. ICETE 2023 promises to be an exciting and innovative event with keynote and invited talks, oral and poster presentations. We invite you to submit your latest research work to ICETE 2023 and look forward to welcoming you in-person to University College of Engineering, Osmania University, Hyderabad, India. We are closely monitoring the COVID-19 situation. We will be taking all necessary precautions and adhere to the COVID-19 guidelines issued by the Government of Telangana & Osmania University, India.
Publisher: Springer Nature
ISBN: 9464632526
Category : Technology & Engineering
Languages : en
Pages : 1408
Book Description
This is an open access book. The 2nd International Conference on Emerging Trends in Engineering (ICETE 2023) will be held in-person from April 28-30, 2023 at University College of Engineering, Osmania University, Hyderabad, India. Since its inception in 2019, The International Conference on Emerging Trends in Engineering (ICETE) has established to enhance the information exchange of theoretical research and practical advancements at national and international levels in the fields of Bio-Medical, Civil, Computer Science, Electrical, Electronics & Communication Engineering, Mechanical and Mining Engineering. This encourages and promotes professional interaction among students, scholars, researchers, educators, professionals from industries and other groups to share latest findings in their respective fields towards sustainable developments. ICETE 2023 promises to be an exciting and innovative event with keynote and invited talks, oral and poster presentations. We invite you to submit your latest research work to ICETE 2023 and look forward to welcoming you in-person to University College of Engineering, Osmania University, Hyderabad, India. We are closely monitoring the COVID-19 situation. We will be taking all necessary precautions and adhere to the COVID-19 guidelines issued by the Government of Telangana & Osmania University, India.