Reliability Assessment of GaN HEMTs on Si Substrate with Ultra-short Gate Dedicated to Power Applications at Frequency Above 40 GHz PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Reliability Assessment of GaN HEMTs on Si Substrate with Ultra-short Gate Dedicated to Power Applications at Frequency Above 40 GHz PDF full book. Access full book title Reliability Assessment of GaN HEMTs on Si Substrate with Ultra-short Gate Dedicated to Power Applications at Frequency Above 40 GHz by Hadhemi Lakhdhar. Download full books in PDF and EPUB format.
Author: Hadhemi Lakhdhar
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This Ph.D. work focuses on the reliability assessment of ultra-short gate AlGaN/GaN high electron mobility transistor (HEMT) on silicon substrate dedicated to power applications at frequency above 40GHz. It was carried out within IMS Bordeaux and IEMN Lille laboratories.This work initially compares AlGaN/GaN HEMTs grown by MOCVD with those grown using MBE, through electrical characterization.In particular, the device geometry impact on the device performances has been studies by static electrical characterization.Step-stress experiments are performed to investigate reliability assessment of ultra-short gate AlGaN/GaN high electron mobility transistor (HEMT) on Si substrate. A methodology based on a sequence of step stress tests has been defined for in-situ diagnosis of a permanent degradation and of a degradation which is identified by a drain current transient occurring during each step of the ageing sequence . The same stress conditions were applied on HEMTs with different geometries. It is found no evolution of the drain current during non stressful steps. The value of the critical degradation voltage beyond which the stress drain current starts to decrease significantly is also found dependent on the stress bias conditions, the gate-drain distance and the gate length. Moreover, the safe operating area of this technology has been determined.
Author: Hadhemi Lakhdhar
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This Ph.D. work focuses on the reliability assessment of ultra-short gate AlGaN/GaN high electron mobility transistor (HEMT) on silicon substrate dedicated to power applications at frequency above 40GHz. It was carried out within IMS Bordeaux and IEMN Lille laboratories.This work initially compares AlGaN/GaN HEMTs grown by MOCVD with those grown using MBE, through electrical characterization.In particular, the device geometry impact on the device performances has been studies by static electrical characterization.Step-stress experiments are performed to investigate reliability assessment of ultra-short gate AlGaN/GaN high electron mobility transistor (HEMT) on Si substrate. A methodology based on a sequence of step stress tests has been defined for in-situ diagnosis of a permanent degradation and of a degradation which is identified by a drain current transient occurring during each step of the ageing sequence . The same stress conditions were applied on HEMTs with different geometries. It is found no evolution of the drain current during non stressful steps. The value of the critical degradation voltage beyond which the stress drain current starts to decrease significantly is also found dependent on the stress bias conditions, the gate-drain distance and the gate length. Moreover, the safe operating area of this technology has been determined.
Author: Cheikh Abdoulahi Tine
Publisher:
ISBN:
Category : Gallium nitride
Languages : en
Pages : 66
Get Book Here
Book Description
Recent advances in the development of gallium nitride (GaN) high electron mobility transistor (HEMT) have shown promising results in the application of high frequency power conversion techniques. GaN transistors are emerging as a credible alternative to silicon (Si) devices in multiple power conversion applications. This is mainly because the characteristics of GaN offer higher electron mobility, electron velocity, and higher breakdown voltage compared to (Si) devices. In spite of the promising attributes offered by GaN devices, significant technological readiness level challenges remain, in order for the technology to be adopted pervasively into the market. These challenges relate to the reliability of the material both at the device-physics level, and at the circuit-implementation level. This thesis presents detailed studies on some of the circuit-level reliability phenomena affecting GaN technology. These studies will offer a better understanding of the limitations associated with GaN so that the technology's beneficial aspects can be leveraged. The first reliability investigation performed was related to a comparison of two 600 V GaN HEMTs based on the same die, however packaged in two different configurations. In order to characterize the performance of the GaN HEMT, a realistic behavioral simulation model was developed in this thesis. The model takes into consideration both the static and dynamic characteristics of the HEMT including drain current variations with respect to gate voltage and drain voltage, ON resistance, intrinsic capacitances, and reverse recovery current and charge. The model was also integrated with values for the per-terminal parasitic package inductances. These values were obtained through empirical measurement. The modeled transistor was then simulated in a converter to analyze the overall performance of the system. Experimental results verified the results obtained by the model. This study thus presents a framework to project and assess the effect of each parasitic inductance on the performance of next generation GaN devices. In the second reliability study, the effect of gate-stress on the performance of normally-off GaN HEMT devices in a boost converter was investigated. The converter's efficiency, output voltage stability, and gate current were evaluated in order to scrutinize the failure mechanisms of pGaN gated lateral GaN devices under high gate stress. It was observed that the transient overshoot of the gate voltage during turn-on becomes switching frequency-dependent once the device has suffered sufficient degradation, leading to a marked decline in converter performance. This observation has not been reported in the previous literature. This improved understanding may allow mitigation of degradation mechanisms in GaN at the fabrication, packaging, and circuit implementation level. The results of this thesis are beneficial in two ways. First it offers insights into the safe and reliable implementation of GaN devices at the circuits-level, thus obviating the need to trade device performance for device safety. Secondly, the gate-stressing investigation unveils degradation characteristics that are of critical importance to the design and fabrication of next generation GaN devices.
Author: Matteo Meneghini
Publisher: Springer
ISBN: 3319431994
Category : Technology & Engineering
Languages : en
Pages : 383
Get Book Here
Book Description
This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.
Author: Wen Yang
Publisher:
ISBN:
Category :
Languages : en
Pages : 155
Get Book Here
Book Description
Wide bandgap power semiconductor devices, especially Gallium Nitride (GaN) high electron mobility transistors (HEMTs), have gained a lot of attention for high power applications due to their low on-resistance and high switching speed compared to their silicon counterparts. However, the reliability and failure issues related to dynamic performance, gate reliability, and electrostatic discharge have limited the wide applications of GaN power devices. This dissertation presents a systematic study of reliability and failure analysis of GaN-on-Si power devices. Firstly, the correlation between the physical trap mechanisms and the dynamic on-resistance (R[subscript on]) degradation has been investigated using a multi-frequency C-V measurement during pulse-mode stress. The experimental results indicate that the deep-level traps originated from the buffer layer play a dominant role in the dynamic R[subscript on] degradation. Secondly, the Si substrate in GaN-on-Si lateral power devices can be used as an independent contact termination rather than a thermal cooling pad. Therefore, the substrate bias effect in dynamic R[subscript on] and Gate Charge (Q[subscript g]) is necessary to explore both conduction and switching loss in GaN-based converter. A reverse dual polarity (RDP) substrate pulse technique has been developed to mitigate the dynamic R[subscript on] degradation. Thirdly, the gate reliability issues, including Time-dependent dielectric breakdown (TDDB), and Bias Temperature Instability (BTI) have been explored to improve the current capability. The physical model of TDDB in GaN power devices has been established by applying the substrate biases. And three phases of threshold voltage degradation have been presented under Negative Bias Temperature Instability stress. Lastly, the ESD characteristics of GaN power devices are considered for the development of a monolithic GaN-on-Si platform. The breakdown mechanisms under ESD stress have been comprehensively studied using Transmission Line Pulse (TLP) and Very-fast Transmission Line Pulse (VFTLP) measurements.
Author: Jaime Alberto Zamudio Flores
Publisher: kassel university press GmbH
ISBN: 3862193640
Category : Gallium nitride
Languages : en
Pages : 257
Get Book Here
Book Description
This work presents a comprehensive modeling strategy for advanced large-size AlGaN/GaN HEMTs. A 22-element equivalent circuit with 12 extrinsic elements, including 6 capacitances, serves as small-signal model and as basis for a large-signal model. ANalysis of such capacitances leads to original equations, employed to form capacitance ratios. BAsic assumptions of existing parameter extractions for 22-element equivalent circuits are perfected: A) Required capacitance ratios are evaluated with device's top-view images. B) Influences of field plates and source air-bridges on these ratios are considered. The large-signal model contains a gate charge's non-quasi-static model and a dispersive-IDS model. THe extrinsic-to-intrinsic voltage transformation needed to calculate non-quasi-static parameters from small-signal parameters is improved with a new description for the measurement's boundary bias points. ALl IDS-model parameters, including time constants of charge-trapping and self-heating, are extracted using pulsed-DC IV and IDS-transient measurements, highlighting the modeling strategy's empirical character.
Author: Eldad Bahat-Treidel
Publisher: Cuvillier Verlag
ISBN: 3736940947
Category : Science
Languages : en
Pages : 220
Get Book Here
Book Description
Gallium nitride (GaN)-based High Electron Mobility Transistors (HEMTs) for high voltage, high power switching and regulating for space applications are studied in this work. Efficient power switching is associated with operation in high OFF-state blocking voltage while keeping the ON-state resistance, the dynamic dispersion and leakage currents as low as possible. The potential of such devices to operate at high voltages is limited by a chain of factors such as subthreshold leakages and the device geometry. Blocking voltage enhancement is a complicated problem that requires parallel methods for solution; epitaxial layers design, device structural and geometry design, and suitable semiconductor manufacturing technique. In this work physical-based device simulation as an engineering tool was developed. An overview on GaN-based HEMTs physical based device simulation using Silvaco-“ATLAS” is given. The simulation is utilized to analyze, give insight to the modes of operation of the device and for design and evaluation of innovative concepts. Physical-based models that describe the properties of the semiconductor material are introduced. A detailed description of the specific AlGaN/GaN HEMT structure definition and geometries are given along with the complex fine meshing requirements. Nitride-semiconductor specific material properties and their physical models are reviewed focusing on the energetic band structure, epitaxial strain tensor calculation in wurtzite materials and build-in polarization models. Special attention for thermal conductivity, carriers’ mobility and Schottky-gate-reverse-bias-tunneling is paid. Empirical parameters matching and adjustment of models parameters to match the experimental device measured results are discussed. An enhancement of breakdown voltage in AlxGa1-xN/GaN HEMT devices by increasing the electron confinement in the transistor channel using a low Al content AlyGa1-yN back-barrier layer structure is systematically studied. It is shown that the reduced sub-threshold drain-leakage current through the buffer layer postpones the punch-through and therefore shifts the breakdown of the device to higher voltages. It is also shown that the punch-through voltage (VPT) scales up with the device dimensions (gate to drain separation). An optimized electron confinement results both, in a scaling of breakdown voltage with device geometry and a significantly reduced sub-threshold drain and gate leakage currents. These beneficial properties are pronounced even further if gate recess technology is applied for device fabrication. For the systematic study a large variations of back-barrier epitaxial structures were grown on sapphire, n-type 4H-SiC and semi-insulating 4H-SiC substrates. The devices with 5 μm gate-drain separation grown on n-SiC owning Al0.05Ga0.95N and Al0.10Ga0.90N back-barrier exhibit 304 V and 0.43 m × cm2 and 342 V and 0.41 m × cm2 respectively. To investigate the impact of AlyGa1-yN back-barrier on the device properties the devices were characterized in DC along with microwave mode and robustness DC-step-stress test. Physical-based device simulations give insight in the respective electronic mechanisms and to the punch-through process that leads to device breakdown. Systematic study of GaN-based HEMT devices with insulating carbon-doped GaN back-barrier for high voltage operation is also presented. Suppression of the OFF-state sub-threshold drain leakage-currents enables breakdown voltage enhancement over 1000 V with low ON-state resistance. The devices with 5 μm gate-drain separation on SI-SiC and 7 μm gate-drain separation on n-SiC exhibit 938 V and 0.39 m × cm2 and 942 V and 0.39 m × cm2 respectively. Power device figure of merit of ~2.3 × 109 V2/-cm2 was calculated for these devices. The impacts of variations of carbon doping concentration, GaN channel thickness and substrates are evaluated. Trade-off considerations in ON-state resistance and of current collapse are addressed. A novel GaN-based HEMTs with innovative planar Multiple-Grating-Field-Plates (MGFPs) for high voltage operation are described. A synergy effect with additional electron channel confinement by using a heterojunction AlGaN back-barrier is demonstrated. Suppression of the OFF-state sub-threshold gate and drain leakage-currents enables breakdown voltage enhancement over 700 V and low ON-state resistance of 0.68 m × cm2. Such devices have a minor trade-off in ON-state resistance, lag factor, maximum oscillation frequency and cut-off frequency. Systematic study of the MGFP design and the effect of Al composition in the back-barrier are described. Physics-based device simulation results give insight into electric field distribution and charge carrier concentration depending on field-plate design. The GaN superior material breakdown strength properties are not always a guarantee for high voltage devices. In addition to superior epitaxial growth design and optimization for high voltage operation the device geometrical layout design and the device manufacturing process design and parameters optimization are important criteria for breakdown voltage enhancement. Smart layout prevent immature breakdown due to lateral proximity of highly biased interconnects. Optimization of inter device isolation designed for high voltage prevents substantial subthreshold leakage. An example for high voltage test device layout design and an example for critical inter-device insulation manufacturing process optimization are presented. While major efforts are being made to improve the forward blocking performance, devices with reverse blocking capability are also desired in a number of applications. A novel GaN-based HEMT with reverse blocking capability for Class-S switch-mode amplifiers is introduced. The high voltage protection is achieved by introducing an integrated recessed Schottky contact as a drain electrode. Results from our Schottky-drain HEMT demonstrate an excellent reverse blocking with minor trade-off in the ON-state resistance for the complete device. The excellent quality of the forward diode characteristics indicates high robustness of the recess process. The reverse blocking capability of the diode is better than –110 V. Physical-based device simulations give insight in the respective electronic mechanisms. Zusammenfassung In dieser Arbeit wurden Galliumnitrid (GaN)-basierte Hochspannungs-HEMTs (High Electron Mobility Transistor) für Hochleistungsschalt- und Regelanwendungen in der Raumfahrt untersucht. Effizientes Leistungsschalten erfordert einen Betrieb bei hohen Sperrspannungen gepaart mit niedrigem Einschaltwiderstand, geringer dynamischer Dispersion und minimalen Leckströmen. Dabei wird das aus dem Halbleitermaterial herrührende Potential für extrem spannungsfeste Transistoren aufgrund mehrerer Faktoren aus dem lateralen und dem vertikalen Bauelementedesign oft nicht erreicht. Physikalisch-basierte Simulationswerkzeuge für die Bauelemente wurden daher entwickelt. Die damit durchgeführte Analyse der unterschiedlichen Transistorbetriebszustände ermöglichte das Entwickeln innovativer Bauelementdesignkonzepte. Das Erhöhen der Bauelementsperrspannung erfordert parallele und ineinandergreifende Lösungsansätze für die Epitaxieschichten, das strukturelle und das geometrische Design und für die Prozessierungstechnologie. Neuartige Bauelementstrukturen mit einer rückseitigen Kanalbarriere (back-barrier) aus AlGaN oder Kohlenstoff-dotierem GaN in Kombination mit neuartigen geometrischen Strukturen wie den Mehrfachgitterfeldplatten (MGFP, Multiple-Grating-Field-Plate) wurden untersucht. Die elektrische Gleichspannungscharakterisierung zeigte dabei eine signifikante Verringerung der Leckströme im gesperrten Zustand. Dies resultierte bei nach wie vor sehr kleinem Einschaltwiderstand in einer Durchbruchspannungserhöhung um das etwa Zehnfache auf über 1000 V. Vorzeitige Spannungsüberschläge aufgrund von Feldstärkenspitzen an Verbindungsmetallisierungen werden durch ein geschickt gestaltetes Bauelementlayout verhindert. Eine Optimierung der Halbleiterisolierung zwischen den aktiven Strukturen führte auch im kV-Bereich zu vernachlässigbaren Leckströme. Während das Hauptaugenmerk der Arbeit auf der Erhöhung der Spannungsfestigkeit im Vorwärtsbetrieb des Transistors lag, ist für einige Anwendung auch ein rückwärtiges Sperren erwünscht. Für Schaltverstärker im S-Klassenbetrieb wurde ein neuartiger GaN-HEMT entwickelt, dessen rückwärtiges Sperrverhalten durch einen tiefgelegten Schottkykontakt als Drainelektrode hervorgerufen wird. Eine derartige Struktur ergab eine rückwärtige Spannungsfestigkeit von über 110 V.
Author: Krzysztof Iniewski
Publisher: CRC Press
ISBN: 1351833359
Category : Technology & Engineering
Languages : en
Pages : 602
Get Book Here
Book Description
With contributions from top international experts from both industry and academia, Nano-Semiconductors: Devices and Technology is a must-read for anyone with a serious interest in future nanofabrication technologies. Taking into account the semiconductor industry’s transition from standard CMOS silicon to novel device structures—including carbon nanotubes (CNT), graphene, quantum dots, and III-V materials—this book addresses the state of the art in nano devices for electronics. It provides an all-encompassing, one-stop resource on the materials and device structures involved in the evolution from micro- to nanoelectronics. The book is divided into three parts that address: Semiconductor materials (i.e., carbon nanotubes, memristors, and spin organic devices) Silicon devices and technology (i.e., BiCMOS, SOI, various 3D integration and RAM technologies, and solar cells) Compound semiconductor devices and technology This reference explores the groundbreaking opportunities in emerging materials that will take system performance beyond the capabilities of traditional CMOS-based microelectronics. Contributors cover topics ranging from electrical propagation on CNT to GaN HEMTs technology and applications. Approaching the trillion-dollar nanotech industry from the perspective of real market needs and the repercussions of technological barriers, this resource provides vital information about elemental device architecture alternatives that will lead to massive strides in future development.
Author: Ponky Ivo
Publisher: Cuvillier
ISBN: 9783954042593
Category : Gallium nitride
Languages : en
Pages : 0
Get Book Here
Book Description
AlGaN/GaN HEMTs reliability and stability issues were investigated in dependence on epitaxial design and process modification. DC-Step-Stress-Tests have been performed on wafers as a fast device robustness screening method. As a criterion of robustness they deliver a critical source-drain voltage for the onset of degradation. Several degradation modes were observed which depend on epi design, epi quality and process technology. Electrical and optical characterizations together with electric field simulations were performed to get insight into respective degradation modes. It has been found that AlGaN/GaN HEMT devices with GaN cap show higher critical source-drain voltages as compared to non-capped devices. Devices with low Al concentration in the AlGaN barrier layer also show higher critical source-drain voltages. Superior stability and robustness performance have been achieved from devices with AlGaN backbarrier epi design grown on n-type SiC substrate. For the onset on any degradation modes the presence of high electrical fields is most decisive for ON- and OFF-state operation conditions. Therefore careful epi design to reduce high electric field is mandatory. It is also shown that epi buffer quality and growth process have a great impact on device robustness. Defects such as point defects and dislocations are assumed to be created initially during stressing and accumulated to larger defect clusters during device stressing. Electroluminescence (EL) measurements were performed to detect early degradation. Extended localized defects are resulting as bright spots at OFF-state conditions in conjunction with a gate leakage increase.
Author: Farid Medjdoub
Publisher: MDPI
ISBN: 3036505660
Category : Technology & Engineering
Languages : en
Pages : 242
Get Book Here
Book Description
Emerging wide bandgap (WBG) semiconductors hold the potential to advance the global industry in the same way that, more than 50 years ago, the invention of the silicon (Si) chip enabled the modern computer era. SiC- and GaN-based devices are starting to become more commercially available. Smaller, faster, and more efficient than their counterpart Si-based components, these WBG devices also offer greater expected reliability in tougher operating conditions. Furthermore, in this frame, a new class of microelectronic-grade semiconducting materials that have an even larger bandgap than the previously established wide bandgap semiconductors, such as GaN and SiC, have been created, and are thus referred to as “ultra-wide bandgap” materials. These materials, which include AlGaN, AlN, diamond, Ga2O3, and BN, offer theoretically superior properties, including a higher critical breakdown field, higher temperature operation, and potentially higher radiation tolerance. These attributes, in turn, make it possible to use revolutionary new devices for extreme environments, such as high-efficiency power transistors, because of the improved Baliga figure of merit, ultra-high voltage pulsed power switches, high-efficiency UV-LEDs, and electronics. This Special Issue aims to collect high quality research papers, short communications, and review articles that focus on wide bandgap device design, fabrication, and advanced characterization. The Special Issue will also publish selected papers from the 43rd Workshop on Compound Semiconductor Devices and Integrated Circuits, held in France (WOCSDICE 2019), which brings together scientists and engineers working in the area of III–V, and other compound semiconductor devices and integrated circuits. In particular, the following topics are addressed: – GaN- and SiC-based devices for power and optoelectronic applications – Ga2O3 substrate development, and Ga2O3 thin film growth, doping, and devices – AlN-based emerging material and devices – BN epitaxial growth, characterization, and devices
Author: Alex Lidow
Publisher: John Wiley & Sons
ISBN: 1119594421
Category : Science
Languages : en
Pages : 470
Get Book Here
Book Description
An up-to-date, practical guide on upgrading from silicon to GaN, and how to use GaN transistors in power conversion systems design This updated, third edition of a popular book on GaN transistors for efficient power conversion has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout, and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. GaN Transistors for Efficient Power Conversion, 3rd Edition brings key updates to the chapters of Driving GaN Transistors; Modeling, Simulation, and Measurement of GaN Transistors; DC-DC Power Conversion; Envelope Tracking; and Highly Resonant Wireless Energy Transfer. It also offers new chapters on Thermal Management, Multilevel Converters, and Lidar, and revises many others throughout. Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications Updated with 35% new material, including three new chapters on Thermal Management, Multilevel Converters, Wireless Power, and Lidar Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors A valuable resource for professional engineers, systems designers, and electrical engineering students who need to fully understand the state-of-the-art GaN Transistors for Efficient Power Conversion, 3rd Edition is an essential learning tool and reference guide that enables power conversion engineers to design energy-efficient, smaller, and more cost-effective products using GaN transistors.
