Process Modelling and Simulation with Finite Element Methods

Process Modelling and Simulation with Finite Element Methods PDF Author: William B. J. Zimmerman
Publisher: World Scientific
ISBN: 9789812387936
Category : Mathematics
Languages : en
Pages : 404

Get Book Here

Book Description
This book presents a systematic description and case studies of chemical engineering modelling and simulation based on the MATLAB/FEMLAB tools, in support of selected topics in undergraduate and postgraduate programmes that require numerical solution of complex balance equations (ordinary differential equations, partial differential equations, nonlinear equations, integro-differential equations). These systems arise naturally in analysis of transport phenomena, process systems, chemical reactions and chemical thermodynamics, and particle rate processes. Templates are given for modelling both state-of-the-art research topics (e.g. microfluidic networks, film drying, multiphase flow, population balance equations) and case studies of commonplace design calculations -- mixed phase reactor design, heat transfer, flowsheet analysis of unit operations, flash distillations, etc. The great strength of this book is that it makes modelling and simulating in the MATLAB/FEMLAB environment approachable to both the novice and the expert modeller.

Process Modelling and Simulation with Finite Element Methods

Process Modelling and Simulation with Finite Element Methods PDF Author: William B. J. Zimmerman
Publisher: World Scientific
ISBN: 9789812387936
Category : Mathematics
Languages : en
Pages : 404

Get Book Here

Book Description
This book presents a systematic description and case studies of chemical engineering modelling and simulation based on the MATLAB/FEMLAB tools, in support of selected topics in undergraduate and postgraduate programmes that require numerical solution of complex balance equations (ordinary differential equations, partial differential equations, nonlinear equations, integro-differential equations). These systems arise naturally in analysis of transport phenomena, process systems, chemical reactions and chemical thermodynamics, and particle rate processes. Templates are given for modelling both state-of-the-art research topics (e.g. microfluidic networks, film drying, multiphase flow, population balance equations) and case studies of commonplace design calculations -- mixed phase reactor design, heat transfer, flowsheet analysis of unit operations, flash distillations, etc. The great strength of this book is that it makes modelling and simulating in the MATLAB/FEMLAB environment approachable to both the novice and the expert modeller.

Multiphysics Modeling With Finite Element Methods

Multiphysics Modeling With Finite Element Methods PDF Author: William B J Zimmerman
Publisher: World Scientific Publishing Company
ISBN: 9813106735
Category : Technology & Engineering
Languages : en
Pages : 434

Get Book Here

Book Description
Finite element methods for approximating partial differential equations that arise in science and engineering analysis find widespread application. Numerical analysis tools make the solutions of coupled physics, mechanics, chemistry, and even biology accessible to the novice modeler. Nevertheless, modelers must be aware of the limitations and difficulties in developing numerical models that faithfully represent the system they are modeling.This textbook introduces the intellectual framework for modeling with Comsol Multiphysics, a package which has unique features in representing multiply linked domains with complex geometry, highly coupled and nonlinear equation systems, and arbitrarily complicated boundary, auxiliary, and initial conditions. But with this modeling power comes great opportunities and great perils.Progressively, in the first part of the book the novice modeler develops an understanding of how to build up complicated models piecemeal and test them modularly. The second part of the book introduces advanced analysis techniques. The final part of the book deals with case studies in a broad range of application areas including nonlinear pattern formation, thin film dynamics and heterogeneous catalysis, composite and effective media for heat, mass, conductivity, and dispersion, population balances, tomography, multiphase flow, electrokinetic, microfluidic networks, plasma dynamics, and corrosion chemistry.As a revision of Process Modeling and Simulation with Finite Element Methods, this book uses the very latest features of Comsol Multiphysics. There are new case studies on multiphase flow with phase change, plasma dynamics, electromagnetohydrodynamics, microfluidic mixing, and corrosion. In addition, major improvements to the level set method for multiphase flow to ensure phase conservation is introduced.

Finite Element Method in Machining Processes

Finite Element Method in Machining Processes PDF Author: Angelos P. Markopoulos
Publisher: Springer Science & Business Media
ISBN: 1447143302
Category : Technology & Engineering
Languages : en
Pages : 96

Get Book Here

Book Description
Finite Element Method in Machining Processes provides a concise study on the way the Finite Element Method (FEM) is used in the case of manufacturing processes, primarily in machining. The basics of this kind of modeling are detailed to create a reference that will provide guidelines for those who start to study this method now, but also for scientists already involved in FEM and want to expand their research. A discussion on FEM, formulations, and techniques currently in use is followed up by machining case studies. Orthogonal cutting, oblique cutting, 3D simulations for turning and milling, grinding, and state-of-the-art topics such as high speed machining and micromachining are explained with relevant examples. This is all supported by a literature review and a reference list for further study. As FEM is a key method for researchers in the manufacturing and especially in the machining sector, Finite Element Method in Machining Processes is a key reference for students studying manufacturing processes but also for industry professionals.

The Finite Element Method: Solid mechanics

The Finite Element Method: Solid mechanics PDF Author: O. C. Zienkiewicz
Publisher: Butterworth-Heinemann
ISBN: 9780750650557
Category : Continuum mechanics
Languages : en
Pages : 482

Get Book Here

Book Description


Practical Finite Element Analysis

Practical Finite Element Analysis PDF Author: Nitin S. Gokhale
Publisher: FINITE TO INFINITE
ISBN: 8190619500
Category : Engineering
Languages : en
Pages : 27

Get Book Here

Book Description
Highlights of the book: Discussion about all the fields of Computer Aided Engineering, Finite Element Analysis Sharing of worldwide experience by more than 10 working professionals Emphasis on Practical usuage and minimum mathematics Simple language, more than 1000 colour images International quality printing on specially imported paper Why this book has been written ... FEA is gaining popularity day by day & is a sought after dream career for mechanical engineers. Enthusiastic engineers and managers who want to refresh or update the knowledge on FEA are encountered with volume of published books. Often professionals realize that they are not in touch with theoretical concepts as being pre-requisite and find it too mathematical and Hi-Fi. Many a times these books just end up being decoration in their book shelves ... All the authors of this book are from IIT€™s & IISc and after joining the industry realized gap between university education and the practical FEA. Over the years they learned it via interaction with experts from international community, sharing experience with each other and hard route of trial & error method. The basic aim of this book is to share the knowledge & practices used in the industry with experienced and in particular beginners so as to reduce the learning curve & avoid reinvention of the cycle. Emphasis is on simple language, practical usage, minimum mathematics & no pre-requisites. All basic concepts of engineering are included as & where it is required. It is hoped that this book would be helpful to beginners, experienced users, managers, group leaders and as additional reading material for university courses.

Unit Manufacturing Processes

Unit Manufacturing Processes PDF Author: National Research Council
Publisher: National Academies Press
ISBN: 0309176670
Category : Technology & Engineering
Languages : en
Pages : 228

Get Book Here

Book Description
Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Numerical Modelling and Simulation of Metal Processing

Numerical Modelling and Simulation of Metal Processing PDF Author: Christof Sommitsch
Publisher: MDPI
ISBN: 303651080X
Category : Technology & Engineering
Languages : en
Pages : 374

Get Book Here

Book Description
This book deals with metal processing and its numerical modelling and simulation. In total, 21 papers from different distinguished authors have been compiled in this area. Various processes are addressed, including solidification, TIG welding, additive manufacturing, hot and cold rolling, deep drawing, pipe deformation, and galvanizing. Material models are developed at different length scales from atomistic simulation to finite element analysis in order to describe the evolution and behavior of materials during thermal and thermomechanical treatment. Materials under consideration are carbon, Q&T, DP, and stainless steels; ductile iron; and aluminum, nickel-based, and titanium alloys. The developed models and simulations shall help to predict structure evolution, damage, and service behavior of advanced materials.

Simulations for Design and Manufacturing

Simulations for Design and Manufacturing PDF Author: Uday S. Dixit
Publisher: Springer
ISBN: 9811085188
Category : Technology & Engineering
Languages : en
Pages : 308

Get Book Here

Book Description
This book focuses on numerical simulations of manufacturing processes, discussing the use of numerical simulation techniques for design and analysis of the components and the manufacturing systems. Experimental studies on manufacturing processes are costly, time consuming and limited to the facilities available. Numerical simulations can help study the process at a faster rate and for a wide range of process conditions. They also provide good prediction accuracy and deeper insights into the process. The simulation models do not require any pre-simulation, experimental or analytical results, making them highly suitable and widely used for the reliable prediction of process outcomes. The book is based on selected proceedings of AIMTDR 2016. The chapters discuss topics relating to various simulation techniques, such as computational fluid dynamics, heat flow, thermo-mechanical analysis, molecular dynamics, multibody dynamic analysis, and operational modal analysis. These simulation techniques are used to: 1) design the components, 2) to investigate the effect of critical process parameters on the process outcome, 3) to explore the physics of the process, 4) to analyse the feasibility of the process or design, and 5) to optimize the process. A wide range of advanced manufacturing processes are covered, including friction stir welding, electro-discharge machining, electro-chemical machining, magnetic pulse welding, milling with MQL (minimum quantity lubrication), electromagnetic cladding, abrasive flow machining, incremental sheet forming, ultrasonic assisted turning, TIG welding, and laser sintering. This book will be useful to researchers and professional engineers alike.

Modelling and Simulation of Sheet Metal Forming Processes

Modelling and Simulation of Sheet Metal Forming Processes PDF Author: Marta C. Oliveira
Publisher: MDPI
ISBN: 3039285564
Category : Technology & Engineering
Languages : en
Pages : 254

Get Book Here

Book Description
The numerical simulation of sheet metal forming processes has become an indispensable tool for the design of components and their forming processes. This role was attained due to the huge impact in reducing time to market and the cost of developing new components in industries ranging from automotive to packing, as well as enabling an improved understanding of the deformation mechanisms and their interaction with process parameters. Despite being a consolidated tool, its potential for application continues to be discovered with the continuous need to simulate more complex processes, including the integration of the various processes involved in the production of a sheet metal component and the analysis of in-service behavior. The quest for more robust and sustainable processes has also changed its deterministic character into stochastic to be able to consider the scatter in mechanical properties induced by previous manufacturing processes. Faced with these challenges, this Special Issue presents scientific advances in the development of numerical tools that improve the prediction results for conventional forming process, enable the development of new forming processes, or contribute to the integration of several manufacturing processes, highlighting the growing multidisciplinary characteristic of this field.

Finite Element Applications

Finite Element Applications PDF Author: Michael Okereke
Publisher: Springer
ISBN: 3319671251
Category : Technology & Engineering
Languages : en
Pages : 488

Get Book Here

Book Description
This textbook demonstrates the application of the finite element philosophy to the solution of real-world problems and is aimed at graduate level students, but is also suitable for advanced undergraduate students. An essential part of an engineer’s training is the development of the skills necessary to analyse and predict the behaviour of engineering systems under a wide range of potentially complex loading conditions. Only a small proportion of real-life problems can be solved analytically, and consequently, there arises the need to be able to use numerical methods capable of simulating real phenomena accurately. The finite element (FE) method is one such widely used numerical method. Finite Element Applications begins with demystifying the ‘black box’ of finite element solvers and progresses to addressing the different pillars that make up a robust finite element solution framework. These pillars include: domain creation, mesh generation and element formulations, boundary conditions, and material response considerations. Readers of this book will be equipped with the ability to develop models of real-world problems using industry-standard finite element packages.