Author: Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Measuring the violence of a thermal explosion of a cased explosive is important for evaluating safety issues of explosive devices in fires. A sympathetic initiation scenario was studied here where a 9.0 cm diameter by 2.5 cm thick disc of PBX 9501 donor charge encased in a 304 stainless steel assembly was heated on top and bottom flat surfaces until it thermally exploded. The initial heating rate at the metal/explosive interface was 5 C per minute until it reaches 170 C; then this temperature is held for 35 minutes to allow temperature equilibration to within a few degrees throughout the explosive. The heating resumed at a rate of 1 C per minute until the PBX 9501 donor thermally exploded. A PBX 9501 acceptor charge with carbon resistor and manganin foil pressure gauges inserted at various depths was placed at a 10 cm standoff distance from the donor charge's top steel cover plate. Piezoelectric arrival time pins were placed in front of the acceptor surface to measure the velocity and shape of the impacting plate. The stainless steel cover plate of the donor charge had a nominal velocity of 0.55 ± 0.04 mm/[mu]s upon impact and was non-symmetrically warped. The impact of the tilted curved plate induced a three-dimensional compression wave into the acceptor. The rise times of the pressure waves were nominally 1.5 [mu]s with the closest carbon resistor gauges giving peak pressure of 10 kb that decayed to 3 kb for a wave run distance of 2.4 cm.
