Preparation and Characterization of Titanium Dioxide (TIO2) Catalytic Pellet Using Alumina (AL2O3) Support for Detection of Volatile Organic Compounds (VOCS) PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Preparation and Characterization of Titanium Dioxide (TIO2) Catalytic Pellet Using Alumina (AL2O3) Support for Detection of Volatile Organic Compounds (VOCS) PDF full book. Access full book title Preparation and Characterization of Titanium Dioxide (TIO2) Catalytic Pellet Using Alumina (AL2O3) Support for Detection of Volatile Organic Compounds (VOCS) by Mooi Chen Cheah. Download full books in PDF and EPUB format.
Author: Mooi Chen Cheah
Publisher:
ISBN:
Category : Chemical engineering
Languages : en
Pages : 236
Get Book Here
Book Description
Author: Mooi Chen Cheah
Publisher:
ISBN:
Category : Chemical engineering
Languages : en
Pages : 236
Get Book Here
Book Description
Author: Francesco Parrino
Publisher: Elsevier
ISBN: 0128199601
Category : Technology & Engineering
Languages : en
Pages : 734
Get Book Here
Book Description
Titanium Dioxide (TiO2) and its Applications introduces the main physico-chemical properties of TiO2 that form the basis of its applications in various fields. The book focuses on TiO2 applications, with contributions from experts from a wide range of disciplines who address titanium dioxide's utilization in energy, consumer, materials and devices, and catalytic applications. Applications addressed include photocatalysis, catalysis, optics, electronics, energy storage and production, ceramics, pigments, cosmetics, sensors, heat transfer, and more. This book is ideal for a wide readership in the disciplines of materials science, chemistry and engineering in academia and industry. Includes a wide range of applications of titanium dioxide, both current and emerging, in the fields of energy, consumer applications, materials and devices Provides a brief overview of titanium dioxide and its properties and techniques to design, deposit and study the material Discusses relevant properties, preparation methods, and other considerations in each applications-focused chapter
Author: Zhi Hua Lee
Publisher:
ISBN:
Category : Chemical engineering
Languages : en
Pages : 134
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Catalysts
Languages : en
Pages :
Get Book Here
Book Description
Author: Vladimiro Dal Santo
Publisher: MDPI
ISBN: 3038976946
Category : Science
Languages : en
Pages : 208
Get Book Here
Book Description
Although the seminal work of Fujishima et al. dates back to 1971, TiO2 still remains the most diffused and studied semiconductor, employed in photo-oxidation processes for cleantech (i.e., polluted water and air treatment), in solar fuel production (mainly hydrogen production by water photo splitting), and in Carbon Capture and Utilization (CCU) processes by CO2 photoreduction. The eleven articles, among them three reviews, in this book cover recent results and research trends of various aspects of titanium dioxide photocatalysis, with the chief aim of improving the final efficiency of TiO2-based materials. Strategies include doping, metal co-catalyst deposition, and the realization of composites with plasmonic materials, other semiconductors, and graphene. Photocatalysts with high efficiency and selectivity can be also obtained by controlling the precise crystal shape (and homogeneous size) and the organization in superstructures from ultrathin films to hierarchical nanostructures. Finally, the theoretical modeling of TiO2 nanoparticles is discussed and highlighted. The range of topics addressed in this book will stimulate the reader’s interest as well as provide a valuable source of information for researchers in academia and industry.
Author: Magdalena Janus
Publisher: BoD – Books on Demand
ISBN: 9535134132
Category : Science
Languages : en
Pages : 260
Get Book Here
Book Description
Titanium dioxide is mainly used as a pigment and photocatalyst. It is possible to find it in food, cosmetics, building materials, electric devices, and others. This book contains chapters about characteristics of anatase and rutile crystallographic structure of titanium dioxide and the use of theoretical calculation for photoactivity determination.
Author: Haya Abdel Raouf Ahmed
Publisher:
ISBN:
Category : Nanostructured materials
Languages : en
Pages : 220
Get Book Here
Book Description
The goal of this work was to improve the performance of TiO2 nanomaterials by increasing their optical activities by shifting the onset of the response from the UV to the visible-light region. Among the several ways to achieve this goal, doping TiO2 nanomaterials with other elements (e.g. metals) was selected to narrow the band gap and enhance the optical properties of TiO2 nanomaterials. In this work, we have prepared Cu-doped TiO2 and Ag-doped TiO2 nano-catalysts, characterized them and studied their properties, and the optical ones in particular. The Ag-doped TiO2 catalyst was prepared by the sol-gel method while the Cu-doped TiO2 catalyst was prepared by using two different techniques for comparison purposes: the sol-gel method and the inert gas condensation technique under ultra-high vacuum. The Ag-doped TiO2 nano-catalysts prepared by the sol-gel method were characterized by using Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM) and Electron Probe Micro-Analyser (EPMA) for surface morphology and chemical composition, Brunauer-Emmett-Teller (BET) analysis for surface area and porosity measurements, X-ray diffraction (XRD) to determine their crystal structure and UV-visible absorption spectrometry (UV-Vis) to measure the optical properties. The same characterization methods have been applied on the Cudoped TiO2 photocatalysts prepared by the sol-gel method, in addition to some rheological measurements to determine their flow behaviour. Furthermore, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and UV-visible absorption spectrometry (UV-Vis) analyses have been conducted to characterize the Cu-doped TiO2 catalysts prepared by the inert gas condensation technique. vii The experimental work conducted here revealed promising results for improving the performance of the TiO2 nano material by doping it with Cu and Ag metals where the optical activity was enhanced and shifted to the visible region causing an appreciable increase in its effectiveness for photo catalytic applications.
Author: Polly Wanda Chu
Publisher:
ISBN:
Category :
Languages : en
Pages : 434
Get Book Here
Book Description
Thin titanium dioxide films were produced by metalorganic chemical vapor deposition on sapphire(0001) in an ultrahigh vacuum (UHV) chamber. A method was developed for producing controlled submonolayer depositions from titanium isopropoxide precursor. Film thickness ranged from 0.1 to 2.7 nm. In situ X-ray photoelectron spectroscopy (XPS) was used to determine film stoichiometry with increasing thickness. The effect of isothermal annealing on desorption was evaluated. Photoelectron peak shapes and positions from the initial monolayers were analyzed for evidence of interface reaction. Deposition from titanium isopropoxide is divided into two regimes: depositions below and above the pyrolysis temperature. This temperature was determined to be 300 deg C. Controlled submonolayers of titanium oxide were produced by cycles of dosing with titanium isopropoxide vapor below and annealing above 300 deg C. Precursor adsorption below the pyrolysis temperature was observed to saturate after 15 minutes of dosing. The quantity absorbed was shown to have an upper limit of one monolayer. The stoichiometry of thin films grown by the cycling method were determined to be TiO2. Titanium dioxide film stoichiometry was unaffected by isothermal annealing at 700 deg C. Annealing produced a decrease in film thickness. This was explained as due to desorption. Desorption ceased at approximately 2.5 to 3 monolayers, suggesting bonding of the initial monolayers of film to sapphire is stronger than to itself. Evidence of sapphire reduction at the interface by the depositions was not observed. The XPS O is peak shifted with increased film thickness. The shifts were consistent with oxygen in sapphire and titanium dioxide having different O is photoelectron peak positions. Simulations showed the total shifts for thin films ranging in thickness of 0.1 to 2.7 nm to be -0.99 to -1.23 eV. Thick films were produced for comparison.
Author: It-Meng Low
Publisher: CRC Press
ISBN: 1000348288
Category : Technology & Engineering
Languages : en
Pages : 250
Get Book Here
Book Description
Titanium dioxide (TiO2) has drawn considerable attention as an attractive inorganic raw material for various applications due to its inexpensiveness, nontoxic nature, stability, and excellent photocatalytic activity. Photocatalysis is one of the most promising route for sustainable chemistry of the 21st century. It can contribute to solving environmental, global energy, and chemical problems, as well as to the sustainable production of commodities in the near future. This book presents the fundamentals of photocatalysis in nanostructured TiO2 and describes the factors affecting the photocatalytic activity, design, and synthesis of various forms of nanostructured TiO2. It highlights the use of ion-doping and inert-atmosphere annealing to extend the light-absorption range of photocatalysts and reduce recombination between electrons and holes. It discusses numerous applications in the fields of energy and environment, such as water purification, gas sensing, storage and delivery, and energy generation. The book is an invaluable resource and useful guide for a broad readership in various fields of catalysis, materials science, environment, and energy.
Author:
Publisher:
ISBN:
Category : Air
Languages : en
Pages : 36
Get Book Here
Book Description
