Author: Mohammed Hamed Ahmed Soliman
Publisher: Independently Published
ISBN:
Category :
Languages : en
Pages : 70
Get Book Here
Book Description
Failure mode and effect analysis (FMEA) was initiated by the aerospace industry in the 1960s to improve the reliability of systems. It is a part of total quality management programs and should be used to prevent potential failures that could affect safety, production, cost or customer satisfaction. FMEA can be used during the design, service or manufacturing processes to minimize the risk of failure, improving the customer's confidence while also reducing costs.
Author: Mohammed Hamed Ahmed Soliman
Publisher: personal-lean.org
ISBN:
Category : Business & Economics
Languages : en
Pages : 75
Get Book Here
Book Description
FMEA (failure mode and effects analysis) is a method for gathering information about potential points of failure in a design, manufacturing process, product, or service. Failure mode (FM) refers to the manner in which something may fail. It includes potential errors that could occur, particularly errors that could have an impact on the customer. Deciphering the consequences of those breakdowns is part of effective analysis (EA). This is accomplished by ensuring that all failures can be detected, determining how frequently a failure may occur, and determining which potential failures should be prioritized. FMEA templates are commonly used by business analysts to aid in the completion of analyses. FMEA is a risk assessment tool with a 1-10 scoring scale. A one indicates low risk, while a ten indicates extremely high risk. FMEA is an effective method for development and manufacturing organizations to reduce potential failures throughout the product lifecycle. Six Sigma's project team use FMEA in the Analyze stage of DMAIC because extraordinary quality is not only designed into the product, it is designed into the development process itself. This book includes various real case studies and offers a step-by-step training for constructing FMEA.
Author: Mohammed Hamed Ahmed Soliman
Publisher: Mohammed Hamed Ahmed Soliman
ISBN:
Category : Business & Economics
Languages : en
Pages : 75
Get Book Here
Book Description
The laboratory examination of a lubricant's characteristics, suspended impurities, and wear debris is known as oil analysis (OA). OA is carried out as part of regular predictive maintenance to deliver precise and useful data on lubricant and machine condition. Trends can be found by following the findings of oil analysis samples over the course of a certain machine. These trends can help avoid expensive repairs. Tribology is the study of wear in machinery. Tribologists frequently perform or interpret results from oil analyses. Oil analysis is a long-term program that, where relevant, can eventually be more predictive than any of the other technologies. It can take years for a plant's oil program to reach this level of sophistication and effectiveness. This book includes what all practitioners need to know to build an oil analysis program for their machine inspection. This book includes three real case studies and numerous industrial examples to improve machine reliability and enhance the condition monitoring program.
Author: Mohammed Hamed Ahmed Soliman
Publisher: Mohammed Hamed Ahmed Soliman
ISBN:
Category : Business & Economics
Languages : en
Pages : 75
Get Book Here
Book Description
A Failure Mode and Effect Analysis FMEA is a systematic method for identifying and preventing product and process problems before they occur. FMEAs are focused on preventing defects, enhancing safety and increasing customer satisfaction. FMEAs are conducted in the product design or process development stages, although conducting an FMEA on existing products and processes can also yield substantial benefits. Six Sigma's project team use FMEA in the Analyze stage of DMAIC because extraordinary quality is not only designed into the product, it is designed into the development process itself.
Author: Mohammed Hamed Ahmed Soliman
Publisher: Mohammed Hamed Ahmed Soliman
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 96
Get Book Here
Book Description
In order to identify unusual vibration occurrences and assess the general health of the test object, vibration analysis is a procedure that tracks vibration levels and looks into the patterns in vibration signals within a component, piece of equipment, or building. It is frequently conducted on both the frequency spectrum, which is derived by applying Fourier Transform to the time waveform, as well as the time waveforms of the vibration signal directly. Mechanical vibration Analysis should present 50% of any condition monitoring program. This book include a practical guide to vibration analysis to prepare practitioners for levels I II & III to become certified analyst. Numerous examples with photos are included to present how to detect different types of equipment and assets failure include: bearing, shafts misalignment, unbalance, rotor problems, electric motors and more using spectrum analysis technique.
Author: Mohammed Hamed Ahmed Soliman
Publisher: personal-lean.org
ISBN:
Category : Business & Economics
Languages : en
Pages : 76
Get Book Here
Book Description
Toyota doesn't just make high-quality products; they also have a process for making sure everything they do is high-quality. Next time you want to say Toyota isn't that great, think about how their way of doing things could help you make better quality products. Reliability is about having a product or service that can be trusted is really important for making customers happy. This means that the product will work the way the customer wants it to, and it will keep working well for a long time. Quality experts are basically saying that it is very important to focus on improving quality in all aspects of a business. They believe that businesses should prioritize quality in order to be successful. The more complicated the product is, the harder this task gets. Before World War II, the military, aerospace, and aircraft industries used the failure mode and effect analysis (FMEA) approach. Toyota then invented its production system after the war. FMEA has been around since the middle of the 20th century, especially in the aerospace and military industries. FMEA was made in the 1940s and used by the U.S The military works to find and fix problems in production before they happen. The method worked well, so NASA used it for different projects like Apollo and Voyager in the 1960s. Nowadays Six Sigma's project team use FMEA in the Analyze stage of DMAIC because extraordinary quality is not only designed into the product, it is designed into the development process itself. The DRBFM methodology was created by Tatsuhiko Yoshimura, who is an expert in quality and a professor at Kyushu University in Japan. Yoshimura understood that making changes without the right documents can cause design problems. He used the idea of preventing problems before they happen to come up with his own way of thinking called DRBFM.
Author: Mohammed Hamed Ahmed Soliman
Publisher: Mohammed Hamed Ahmed Soliman
ISBN:
Category : Business & Economics
Languages : en
Pages : 23
Get Book Here
Book Description
One of the main difficulties for people practicing lean is trying to find a clear and direct link between doing something that aligns with lean principles and the financial advantage it brings. Toyota follows certain principles in regards to cost-benefit analysis (CBA) by making management decisions based on thinking about the financial impact in the long run rather than focusing on short-term gains.
Author: Mohammed Hamed Ahmed Soliman
Publisher: Mohammed Hamed Ahmed Soliman
ISBN:
Category : Business & Economics
Languages : en
Pages : 265
Get Book Here
Book Description
Yes, people called Toyota Production System an inventory reduction program when they first heard of it. “Just in time” is one of the main pillars in the TPS. “Just in time” ideally means “one-piece flow.” Inventory is the greatest waste in the process, and it hides many problems, such as quality problems, breakdown times, waiting waste, and more. Let’s get back to history. Prior to the 1970 oil crisis, very few people in the world know what Toyota was up to. The fact that it emerged stronger than ever while many of its competitors were quite battered made people take notice. People went to Japan to find out how Toyota had done this. What people found was that Toyota was doing something called “just in time.” In the West, this was interpreted as an inventory reduction program. As a result, it became known as the “just-in-time inventory” program. Nobody really believed inventory could be taken out of the whole value stream. Therefore, “just in time” came to mean “go beat the heck out of your suppliers.” The big three auto companies (Ford, General Motors, and Chrysler) had lots of power over their suppliers, and they became pretty expert at this tactic—to their eventual detriment. James P. Womack came forward with Lean Thinking in 1996 and helped many to see the whole value chain. He showed how waste clogs the system and how continuous improvement was needed to link all parts of the chain to customer demand. He explained his findings in plain English, but once again people didn’t hear. Lean might be an element of the larger strategy, but it is most likely to be relegated to plant and manufacturing work. As a result, one company after another has tried lean and failed. Many people believe that just-in-time inventory equals zero inventory. The ideal situation is one-piece flow, which can only be achieved through the use of a manufacturing cell. The inventory buffer exists, but it is rarely used. The Andon system includes a buffer. There is a safeguard in place to protect your customer. There is a buffer to prevent the entire manufacturing line from being shut down to rectify a problem. There is a buffer in place to prevent the breakdown of a vital manufacturing process. Just-in-time production is a manufacturing system that produces and delivers only what is required, only when it is required, and only in the amount required. The Toyota Production System is built on two pillars: JIT and jidoka. JIT is based on heijunka and consists of three operating elements: the pull system, takt time, and continuous flow.
Author: Mohammed Hamed Ahmed Soliman
Publisher: Mohammed Hamed Ahmed Soliman
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 28
Get Book Here
Book Description
Heijunka, which means "production smoothing or leveling" in Japanese, is a method that helps balance production in all areas and with suppliers over time. It aims to make Just-In-Time (JIT) production easier. Heijunka is an important part of Just-in-Time (JIT) production. It means finding and keeping a consistent level of production. The main purpose of using the Heijunka technique is to provide goods at a consistent pace, which allows other operationsto also run smoothly and predictably. This helps decrease wastes and the amount of inventory.
Author: Mohammed Hamed Ahmed Soliman
Publisher: personal-lean.org
ISBN:
Category : Business & Economics
Languages : en
Pages : 86
Get Book Here
Book Description
Many businesses say that lean failed to meet their long-term objectives and that the improvements it brought about were only temporary. When businesses utilize lean as a toolkit, copying and pasting the methodologies without trying to adapt the employee culture, manage the improvement process, maintain the outcomes, and grow their leaders, 7 out of every 10 lean projects fail. The primary objective when the Toyota production method was developed was to eliminate wastes from the shop floor by utilizing some lean techniques and technologies. What wasn't made obvious was that Toyota would need to invest heavily in personnel development and training throughout a protracted leadership development process. An issue with management and leadership, as well as an incorrect understanding of human behavior and the necessary culture for success, is the failure to achieve and sustain improvement.
