Author: Christoph Niemann
Publisher: BoD – Books on Demand
ISBN: 3737608881
Category : Science
Languages : en
Pages : 310
Book Description
It is the aim of this research work is to investigate and to assess quatitatively as well as quantitatively the bearing behaviour of pile groups subjected to cyclic lateral loading. In this context, the influences of different boundary conditions, in particular the soil properties and the pile group geometry are to be analysed experimentally and numerically. Based on a brief literature review in chapter 2, model tests (centrifuge and small-scale at 1g) and numerical investigations have been carried out to contribute to a better understanding of the cyclic behaviour of pile groups. Chapter 3 describes the test procedure and summarises the results of centrifuge tests, which have been carried out at the Centre for Offshore Foundation Systems (COFS) in Perth, Australia. Further investigations have been carried out by means of smallscale model tests at 1g in the testing facilities at the University of Kassel, Germany, with the results as summarised in chapter 4. A comparison of individual results of both test series is provided in chapter 5. The numerical studies in chapter 6 have been carried out in order to analyse the general ability of numerical simulations to calculate the response of pile groups to cyclic lateral loading. Based on the previously derived results, chapter 7 provides equations that can be applied to estimate the cyclic accumulation of lateral displacements of pile groups as well as the cyclic changes of the load distribution within pile groups.
Pile groups under cyclic lateral loading
Author: Christoph Niemann
Publisher: BoD – Books on Demand
ISBN: 3737608881
Category : Science
Languages : en
Pages : 310
Book Description
It is the aim of this research work is to investigate and to assess quatitatively as well as quantitatively the bearing behaviour of pile groups subjected to cyclic lateral loading. In this context, the influences of different boundary conditions, in particular the soil properties and the pile group geometry are to be analysed experimentally and numerically. Based on a brief literature review in chapter 2, model tests (centrifuge and small-scale at 1g) and numerical investigations have been carried out to contribute to a better understanding of the cyclic behaviour of pile groups. Chapter 3 describes the test procedure and summarises the results of centrifuge tests, which have been carried out at the Centre for Offshore Foundation Systems (COFS) in Perth, Australia. Further investigations have been carried out by means of smallscale model tests at 1g in the testing facilities at the University of Kassel, Germany, with the results as summarised in chapter 4. A comparison of individual results of both test series is provided in chapter 5. The numerical studies in chapter 6 have been carried out in order to analyse the general ability of numerical simulations to calculate the response of pile groups to cyclic lateral loading. Based on the previously derived results, chapter 7 provides equations that can be applied to estimate the cyclic accumulation of lateral displacements of pile groups as well as the cyclic changes of the load distribution within pile groups.
Publisher: BoD – Books on Demand
ISBN: 3737608881
Category : Science
Languages : en
Pages : 310
Book Description
It is the aim of this research work is to investigate and to assess quatitatively as well as quantitatively the bearing behaviour of pile groups subjected to cyclic lateral loading. In this context, the influences of different boundary conditions, in particular the soil properties and the pile group geometry are to be analysed experimentally and numerically. Based on a brief literature review in chapter 2, model tests (centrifuge and small-scale at 1g) and numerical investigations have been carried out to contribute to a better understanding of the cyclic behaviour of pile groups. Chapter 3 describes the test procedure and summarises the results of centrifuge tests, which have been carried out at the Centre for Offshore Foundation Systems (COFS) in Perth, Australia. Further investigations have been carried out by means of smallscale model tests at 1g in the testing facilities at the University of Kassel, Germany, with the results as summarised in chapter 4. A comparison of individual results of both test series is provided in chapter 5. The numerical studies in chapter 6 have been carried out in order to analyse the general ability of numerical simulations to calculate the response of pile groups to cyclic lateral loading. Based on the previously derived results, chapter 7 provides equations that can be applied to estimate the cyclic accumulation of lateral displacements of pile groups as well as the cyclic changes of the load distribution within pile groups.
Single Piles and Pile Groups Under Lateral Loading
Author: Lymon C. Reese
Publisher: CRC Press
ISBN: 1439894302
Category : Technology & Engineering
Languages : en
Pages : 529
Book Description
The complexities of designing piles for lateral loads are manifold as there are many forces that are critical to the design of big structures such as bridges, offshore and waterfront structures and retaining walls. The loads on structures should be supported either horizontally or laterally or in both directions and most structures have in common t
Publisher: CRC Press
ISBN: 1439894302
Category : Technology & Engineering
Languages : en
Pages : 529
Book Description
The complexities of designing piles for lateral loads are manifold as there are many forces that are critical to the design of big structures such as bridges, offshore and waterfront structures and retaining walls. The loads on structures should be supported either horizontally or laterally or in both directions and most structures have in common t
Physical Modelling in Geotechnics, Two Volume Set
Author: Sarah Springman
Publisher: CRC Press
ISBN: 0415592887
Category : Technology & Engineering
Languages : en
Pages : 1530
Book Description
This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions. Topics presented at the conference: Soil – Structure – Interaction; Natural Hazards; Earthquake Engineering: Soft Soil Engineering; New Geotechnical Physical; Modelling Facilities; Advanced Experimental Techniques; Comparisons between Physical and Numerical Modelling Specific Topics: Offshore Engineering; Ground Improvement and Foundations; Tunnelling, Excavations and Retaining Structures; Dams and slopes; Process Modelling; Goenvironmental Modelling; Education
Publisher: CRC Press
ISBN: 0415592887
Category : Technology & Engineering
Languages : en
Pages : 1530
Book Description
This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions. Topics presented at the conference: Soil – Structure – Interaction; Natural Hazards; Earthquake Engineering: Soft Soil Engineering; New Geotechnical Physical; Modelling Facilities; Advanced Experimental Techniques; Comparisons between Physical and Numerical Modelling Specific Topics: Offshore Engineering; Ground Improvement and Foundations; Tunnelling, Excavations and Retaining Structures; Dams and slopes; Process Modelling; Goenvironmental Modelling; Education
Design of Piles Under Cyclic Loading
Author: Alain Puech
Publisher: John Wiley & Sons
ISBN: 1786301989
Category : Science
Languages : en
Pages : 454
Book Description
Recent developments in the fields of energy, transport and industrial engineering have led to the emergence of new types of structures and infrastructures subject to variable stresses, for which the usual methods for designing pile foundations are now inadequate. The recommendations presented in this book will help to partly fill this technical gap by proposing a methodological approach and calculation methods to take account of the effects of cyclic loads in the design of foundations on piles. These are based on both laboratory and full scale experiments, and on modeling carried out within the framework of the national SOLCYP project.
Publisher: John Wiley & Sons
ISBN: 1786301989
Category : Science
Languages : en
Pages : 454
Book Description
Recent developments in the fields of energy, transport and industrial engineering have led to the emergence of new types of structures and infrastructures subject to variable stresses, for which the usual methods for designing pile foundations are now inadequate. The recommendations presented in this book will help to partly fill this technical gap by proposing a methodological approach and calculation methods to take account of the effects of cyclic loads in the design of foundations on piles. These are based on both laboratory and full scale experiments, and on modeling carried out within the framework of the national SOLCYP project.
Physical Modelling in Geotechnics, Volume 1
Author: Andrew McNamara
Publisher: CRC Press
ISBN: 0429797680
Category : Technology & Engineering
Languages : en
Pages : 803
Book Description
Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Publisher: CRC Press
ISBN: 0429797680
Category : Technology & Engineering
Languages : en
Pages : 803
Book Description
Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Soil Dynamics and Foundation Modeling
Author: Junbo Jia
Publisher: Springer
ISBN: 3319403583
Category : Technology & Engineering
Languages : en
Pages : 741
Book Description
This book presents a comprehensive topical overview on soil dynamics and foundation modeling in offshore and earthquake engineering. The spectrum of topics include, but is not limited to, soil behavior, soil dynamics, earthquake site response analysis, soil liquefactions, as well as the modeling and assessment of shallow and deep foundations. The author provides the reader with both theory and practical applications, and thoroughly links the methodological approaches with engineering applications. The book also contains cutting-edge developments in offshore foundation engineering such as anchor piles, suction piles, pile torsion modeling, soil ageing effects and scour estimation. The target audience primarily comprises research experts and practitioners in the field of offshore engineering, but the book may also be beneficial for graduate students.
Publisher: Springer
ISBN: 3319403583
Category : Technology & Engineering
Languages : en
Pages : 741
Book Description
This book presents a comprehensive topical overview on soil dynamics and foundation modeling in offshore and earthquake engineering. The spectrum of topics include, but is not limited to, soil behavior, soil dynamics, earthquake site response analysis, soil liquefactions, as well as the modeling and assessment of shallow and deep foundations. The author provides the reader with both theory and practical applications, and thoroughly links the methodological approaches with engineering applications. The book also contains cutting-edge developments in offshore foundation engineering such as anchor piles, suction piles, pile torsion modeling, soil ageing effects and scour estimation. The target audience primarily comprises research experts and practitioners in the field of offshore engineering, but the book may also be beneficial for graduate students.
Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions
Author: Francesco Silvestri
Publisher: CRC Press
ISBN: 0429633505
Category : Technology & Engineering
Languages : en
Pages : 5999
Book Description
Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.
Publisher: CRC Press
ISBN: 0429633505
Category : Technology & Engineering
Languages : en
Pages : 5999
Book Description
Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.
The Pressuremeter
Author: Jean-Louis Briaud
Publisher: Routledge
ISBN: 1351409484
Category : Technology & Engineering
Languages : en
Pages : 551
Book Description
This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.
Publisher: Routledge
ISBN: 1351409484
Category : Technology & Engineering
Languages : en
Pages : 551
Book Description
This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.
Theory and Practice of Pile Foundations
Author: Wei Dong Guo
Publisher: CRC Press
ISBN: 0415809339
Category : Technology & Engineering
Languages : en
Pages : 579
Book Description
Pile Foundations are an essential basis for many structures. It is vital that they be designed with the utmost reliability, because the cost of failure is potentially huge. Covering a whole range of design issues relating to pile design, this book presents economical and efficient design solutions and demonstrates them using real world examples. Coverage includes nonlinear response of single piles to vertical or torsional loading and to cyclic lateral loading, as well as prediction of nonlinear response of lateral pile groups, vertically loaded pile groups and the design of slope stabilising piles. Most solutions are provided as closed-form expressions. Theory and Practice of Pile Foundations is: illustrated with case studies accompanied by practical applications in Excel and MathCad the first book to incorporate nonlinear interaction into pile design. A valuable resource for students of geotechnical engineering taking courses in foundations and a vital tool for engineers designing pile foundations.
Publisher: CRC Press
ISBN: 0415809339
Category : Technology & Engineering
Languages : en
Pages : 579
Book Description
Pile Foundations are an essential basis for many structures. It is vital that they be designed with the utmost reliability, because the cost of failure is potentially huge. Covering a whole range of design issues relating to pile design, this book presents economical and efficient design solutions and demonstrates them using real world examples. Coverage includes nonlinear response of single piles to vertical or torsional loading and to cyclic lateral loading, as well as prediction of nonlinear response of lateral pile groups, vertically loaded pile groups and the design of slope stabilising piles. Most solutions are provided as closed-form expressions. Theory and Practice of Pile Foundations is: illustrated with case studies accompanied by practical applications in Excel and MathCad the first book to incorporate nonlinear interaction into pile design. A valuable resource for students of geotechnical engineering taking courses in foundations and a vital tool for engineers designing pile foundations.
Issues in Geology and Mineralogy: 2013 Edition
Author:
Publisher: ScholarlyEditions
ISBN: 1490109609
Category : Science
Languages : en
Pages : 946
Book Description
Issues in Geology and Mineralogy / 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Hydrometallurgy. The editors have built Issues in Geology and Mineralogy: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Hydrometallurgy in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Geology and Mineralogy: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Publisher: ScholarlyEditions
ISBN: 1490109609
Category : Science
Languages : en
Pages : 946
Book Description
Issues in Geology and Mineralogy / 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Hydrometallurgy. The editors have built Issues in Geology and Mineralogy: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Hydrometallurgy in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Geology and Mineralogy: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.