Author: Randy Shih
Publisher: SDC Publications
ISBN: 1585035394
Category : Computers
Languages : en
Pages : 434
Get Book Here
Book Description
The primary goal of Parametric Modeling with Pro/ENGINEER Wildfire 5.0 is to introduce the aspects of solid modeling and parametric modeling. The text is a hands-on, exercise-intensive approach to all the important parametric modeling techniques and concepts. This book contains a series of eleven tutorial style lessons designed to introduce beginning CAD users to the most commonly used features of Pro/ENGINEER. Each lesson introduces a new set of commands and concepts, building on previous lessons. This text guides you from constructing basic shapes to building intelligent solid models and creating multi-view drawings. The basic premise of this book is that the more designs you create, the better you learn the software. This book will establish a good basis for exploring and growing in the exciting field of computer aided engineering. By the end of this book the reader will advance to an intermediate level Pro/ENGINEER user.
Author: Randy H. Shih
Publisher: SDC Publications
ISBN: 1585035491
Category : Computers
Languages : en
Pages : 433
Get Book Here
Book Description
The primary goal of Introduction to Finite Element Analysis Using Pro/MECHANICA Wildfire 5.0 is to introduce the aspects of finite element analysis that are important to the engineers and designers. Theoretical aspects of Finite Element Analysis (FEA) are also introduced as they are needed to help better understand the operations. The primary emphasis of the text is placed on the practical concepts and procedures to using Pro/MECHANICA in performing Linear Statics Stress Analysis; but the basic modal analysis procedure is covered. This text is intended to be used as a training guide for students and professionals. This text covers Pro/MECHANICA and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on exercise intensive approach to all the important Finite Element Analysis techniques and concepts. This textbook contains a series of ten tutorial style lessons designed to introduce beginning FEA users to Pro/MECHANICA. The basic premise of this book is the more designs you create using Pro/MECHANICA, the Better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.
Author: Roger Toogood
Publisher: SDC Publications
ISBN: 1630573736
Category : Computers
Languages : en
Pages : 409
Get Book Here
Book Description
The eleven lessons in this tutorial introduce you to the design capabilities of Creo Parametric 7.0. The tutorial covers the major concepts and frequently used commands required to advance from a novice to an intermediate user level. Major topics include part and assembly creation, and creation of engineering drawings. Also illustrated are the major functions that make Creo Parametric a parametric solid modeler. Although the commands are presented in a click-by-click manner, an effort has been made, in addition to showing/illustrating the command usage, to explain why certain commands are being used and the relation of feature selection and construction to the overall part design philosophy. Simply knowing where commands can be found is only half the battle. As is pointed out numerous times in the text, creating useful and effective models of parts and assemblies requires advance planning and forethought. Moreover, since error recovery is an important skill, considerable time is spent exploring the created models. In fact, some errors are intentionally induced so that users will become comfortable with the “debugging” phase of model creation. At the end of each lesson is a short quiz reviewing the new topics covered in that chapter. Following the quiz are several simple "exercise" parts that can be created using new commands taught in that lesson. In addition to these an ongoing project throughout the book is also included. This project consists of several parts that are introduced with the early lessons and finally assembled at the end. Who this book is for This book has been written specifically with students in mind. Typically, students enter their first CAD course with a broad range of abilities both in spatial visualization and computer skills. The approach taken here is meant to allow accessibility to persons of all levels. These lessons, therefore, were written for new users with no previous experience with CAD, although some familiarity with computers is assumed.
Author: Kuang-Hua Chang
Publisher: SDC Publications
ISBN: 1585036501
Category : Computers
Languages : en
Pages : 171
Get Book Here
Book Description
Mechanism Design with Creo Elements/Pro 5.0 is designed to help you become familiar with Mechanism Design, a module in the Creo Elements/Pro (formerly Pro/ENGINEER) software family, which supports modeling and analysis (or simulation) of mechanisms in a virtual (computer) environment. Capabilities in Mechanism Design allow users to simulate and visualize mechanism performance. Using Mechanism Design early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase; therefore, contributing to a more cost effective, reliable, and efficient product development process. The book is written following a project-based learning approach and covers the major concepts and frequently used commands required to advance readers from a novice to an intermediate level. Basic concepts discussed include: model creation, such as body and joint definitions; analysis type selection, such as static (assembly) analysis, kinematics and dynamics; and results visualization. The concepts are introduced using simple, yet realistic, examples. Verifying the results obtained from computer simulation is extremely important. One of the unique features of this textbook is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with simulation results obtained using Mechanism Design. The theoretical discussions simply support the verification of simulation results rather than providing an in-depth discussion on the subjects of kinematics and dynamics.
Author: Roger Toogood
Publisher: SDC Publications (Schroff Development Corporation)
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 232
Get Book Here
Book Description
Author: Robert Rizza
Publisher: Peachpit Press
ISBN: 9780131464742
Category : Computer-aided design
Languages : en
Pages : 0
Get Book Here
Book Description
Originating from an introductory engineering graphics and computer aided design (CAD) course, this text is updated to be compatible with the latest Pro/ENGINEER 2001 release. Through the use of tutorials, exercises, and examples, the author shows studentshow to communicate design ideas graphically.
Author: Peng Wu
Publisher: Bentham Science Publishers
ISBN: 1681084570
Category : Architecture
Languages : en
Pages : 343
Get Book Here
Book Description
Building information modelling (BIM) is a set of interacting policies, processes and technologies that generates a methodology to manage the essential building design and project data in digital format throughout the building's life cycle. BIM, makes explicit, the interdependency that exists between structure, architectural layout and mechanical, electrical and hydraulic services by technologically coupling project organizations together. Integrated Building Information Modelling is a handbook on BIM courses, standards and methods used in different regions (Including UK, Africa and Australia). 13 chapters outline essential information about integrated BIM practices such as the BIM in site layout plan, BIM in construction product management, building life cycle assessment, quantity surveying and BIM in hazardous gas monitoring projects while also presenting information about useful BIM tool and case studies. The book is a useful handbook for engineering management professionals and trainees involved in BIM practice.
Author: Randy H. Shih
Publisher:
ISBN: 9781585031160
Category : Computer-aided design
Languages : en
Pages : 0
Get Book Here
Book Description
Author: Roger Toogood
Publisher: SDC Publications
ISBN: 1630572853
Category : Computers
Languages : en
Pages : 265
Get Book Here
Book Description
The purpose of Creo Parametric 6.0 Advanced Tutorial is to introduce you to some of the more advanced features, commands, and functions in Creo Parametric. Each lesson concentrates on a few of the major topics and the text attempts to explain the “why’s” of the commands in addition to a concise step-by-step description of new command sequences. This book is suitable for a second course in Creo Parametric and for users who understand the features already covered in Roger Toogood’s Creo Parametric Tutorial. The style and approach of the previous tutorial have been maintained from the previous book and the text picks up right where the last tutorial left off. The material covered in this tutorial represents an overview of what is felt to be the most commonly used and important functions. These include customization of the working environment, advanced feature creation (sweeps, round sets, draft and tweaks, UDFs, patterns and family tables), layers, Pro/PROGRAM, and advanced drawing and assembly functions. Creo Parametric 6.0 Advanced Tutorial consists of eight lessons. A continuing theme throughout the lessons is the creation of parts for a medium-sized modeling project. The project consists of a small three-wheeled utility cart. Project parts are given at the end of each lesson that utilize functions presented earlier in that lesson. Final assembly is performed in the last lesson.
Author: Louis Gary Lamit
Publisher: Thomson Learning
ISBN: 9780495244684
Category : Computer-aided design
Languages : en
Pages : 0
Get Book Here
Book Description
Pro/Engineer Wildfire 3.0 is one of the most widely used CAD/CAM software programs in the world today. Designed for a one or two semester undergraduate course for first or second year engineering students, Pro/engineer Wildfire 3.0 is an extremely beneficial book for both aspiring and newly employed engineers. The text involves creating a new part, an assembly, or drawing, using a set of Pro/E commands, walking you through the process systematically and guiding you through parametric design. While using this text, a student will create individual parts, assemblies, and drawings.
