Author: Marc Hellemans
Publisher: Elsevier
ISBN: 0323903525
Category : Technology & Engineering
Languages : en
Pages : 398
Book Description
Overpressure Protection in the Process Industry: A Critical View provides a practical and pragmatic guidance for anyone dealing with overpressure protection in the process industry. The book explains the background of complicated international codes and regulations, offering a pragmatic and practical approach on how these codes can be interpreted for specific cases. The book also gives a critical view on these codes and regulations and where they do or don't make sense, along with the challenges in some instances, including technical and practical argumentations. Finally, the book covers specific problem areas and sizing methods when using safety relief devices as overpressure protection, such as how to handle installation, backpressures, blowdowns, the 3% rule, types of chatter and other destructive forces in relief devices. Helps readers understand and apply codes and regulations in a pragmatic way Provides sizing guidance on most overpressure scenarios and how to approach them in a pragmatic way Creates awareness about the possible dangers of overpressure, especially in aging plants and how modifications on the process can jeopardize the overpressure protection Addresses non-regulated types of overpressure protection in a process plant, such as the overpressure and vacuum protection of low-pressure storage tanks and tank blanketing
Overpressure Protection in the Process Industry
Author: Marc Hellemans
Publisher: Elsevier
ISBN: 0323903525
Category : Technology & Engineering
Languages : en
Pages : 398
Book Description
Overpressure Protection in the Process Industry: A Critical View provides a practical and pragmatic guidance for anyone dealing with overpressure protection in the process industry. The book explains the background of complicated international codes and regulations, offering a pragmatic and practical approach on how these codes can be interpreted for specific cases. The book also gives a critical view on these codes and regulations and where they do or don't make sense, along with the challenges in some instances, including technical and practical argumentations. Finally, the book covers specific problem areas and sizing methods when using safety relief devices as overpressure protection, such as how to handle installation, backpressures, blowdowns, the 3% rule, types of chatter and other destructive forces in relief devices. Helps readers understand and apply codes and regulations in a pragmatic way Provides sizing guidance on most overpressure scenarios and how to approach them in a pragmatic way Creates awareness about the possible dangers of overpressure, especially in aging plants and how modifications on the process can jeopardize the overpressure protection Addresses non-regulated types of overpressure protection in a process plant, such as the overpressure and vacuum protection of low-pressure storage tanks and tank blanketing
Publisher: Elsevier
ISBN: 0323903525
Category : Technology & Engineering
Languages : en
Pages : 398
Book Description
Overpressure Protection in the Process Industry: A Critical View provides a practical and pragmatic guidance for anyone dealing with overpressure protection in the process industry. The book explains the background of complicated international codes and regulations, offering a pragmatic and practical approach on how these codes can be interpreted for specific cases. The book also gives a critical view on these codes and regulations and where they do or don't make sense, along with the challenges in some instances, including technical and practical argumentations. Finally, the book covers specific problem areas and sizing methods when using safety relief devices as overpressure protection, such as how to handle installation, backpressures, blowdowns, the 3% rule, types of chatter and other destructive forces in relief devices. Helps readers understand and apply codes and regulations in a pragmatic way Provides sizing guidance on most overpressure scenarios and how to approach them in a pragmatic way Creates awareness about the possible dangers of overpressure, especially in aging plants and how modifications on the process can jeopardize the overpressure protection Addresses non-regulated types of overpressure protection in a process plant, such as the overpressure and vacuum protection of low-pressure storage tanks and tank blanketing
Airblast-overpressure Levels from Confined Underground Production Blasts
Author: James J. Olson
Publisher:
ISBN:
Category : Bins
Languages : en
Pages : 36
Book Description
Publisher:
ISBN:
Category : Bins
Languages : en
Pages : 36
Book Description
A Program for Plotting Circles of Constant Overpressure Around Targeted Points
Author: Mai Liis Joel
Publisher:
ISBN:
Category : Communications, Military
Languages : en
Pages : 64
Book Description
The Defense Communications Agency is responsible for locating its communications facilities in a manner that will maximize the probability of maintaining communication in the face of nuclear attack.This report describes a program written for the IBM 7094 which produces as its final output one or more tapes to be used as input to a CalComp 570 plotter system.With these tapes the plotter can produce overlays for use with the series of World Aeronautical Charts covering the Continental United States. The overlays comprise circles representing a radius of constant overpressure around the target point of a given nuclear weapon.Based on hypothetical attacks the overlays provide the user with a means of visualizing the hardness required of facilities to survive in particular areas.(Author).
Publisher:
ISBN:
Category : Communications, Military
Languages : en
Pages : 64
Book Description
The Defense Communications Agency is responsible for locating its communications facilities in a manner that will maximize the probability of maintaining communication in the face of nuclear attack.This report describes a program written for the IBM 7094 which produces as its final output one or more tapes to be used as input to a CalComp 570 plotter system.With these tapes the plotter can produce overlays for use with the series of World Aeronautical Charts covering the Continental United States. The overlays comprise circles representing a radius of constant overpressure around the target point of a given nuclear weapon.Based on hypothetical attacks the overlays provide the user with a means of visualizing the hardness required of facilities to survive in particular areas.(Author).
Effects of Overpressure on the Ear
Author: Lovelace Foundation for Medical Education and Research
Publisher:
ISBN:
Category : Atomic bomb
Languages : en
Pages : 52
Book Description
Tolerance levels of the human ear to various types of overpressure are discussed. (Author).
Publisher:
ISBN:
Category : Atomic bomb
Languages : en
Pages : 52
Book Description
Tolerance levels of the human ear to various types of overpressure are discussed. (Author).
Development of a 1.22-m-diam Dynamic Air Overpressure Soil Test Facility
Author: Stafford S. Cooper
Publisher:
ISBN:
Category : Materials
Languages : en
Pages : 36
Book Description
A large cold-gas-operated air overpressure test facility has been designed, fabricated, and installed at the U.S. Army Engineer Waterways Experiment Station to test soil specimens 1.22 m in diameter and up to 5.03 m in length under static and blast-type loading conditions. A series of preliminary tests was conducted to evaluate the loading characteristics and overall performance of the facility and to compare results of uniaxial strain tests on dry sand conducted in the large facility with well documented and generally accepted results of tests on similar sand specimens conducted in a previously developed 12.70-cm-diam uniaxial strain test device.
Publisher:
ISBN:
Category : Materials
Languages : en
Pages : 36
Book Description
A large cold-gas-operated air overpressure test facility has been designed, fabricated, and installed at the U.S. Army Engineer Waterways Experiment Station to test soil specimens 1.22 m in diameter and up to 5.03 m in length under static and blast-type loading conditions. A series of preliminary tests was conducted to evaluate the loading characteristics and overall performance of the facility and to compare results of uniaxial strain tests on dry sand conducted in the large facility with well documented and generally accepted results of tests on similar sand specimens conducted in a previously developed 12.70-cm-diam uniaxial strain test device.
Results of Airblast Overpressure Measurement Program at Project R.D. BAILEY
Author: Michael J. Hoeft
Publisher:
ISBN:
Category : Blast effect
Languages : en
Pages : 76
Book Description
Publisher:
ISBN:
Category : Blast effect
Languages : en
Pages : 76
Book Description
Major Hazards and Their Management
Author: Geoff Wells
Publisher: IChemE
ISBN: 9780852953686
Category : Science
Languages : en
Pages : 332
Book Description
A sequel to Hazard Analysis and Risk Assessment, this text demonstrates how to manage major hazards inside and outside the plant.
Publisher: IChemE
ISBN: 9780852953686
Category : Science
Languages : en
Pages : 332
Book Description
A sequel to Hazard Analysis and Risk Assessment, this text demonstrates how to manage major hazards inside and outside the plant.
Report of the Special Committee on the Question of Overpressure in the Schools of the Board
Author: London (England). School Board
Publisher:
ISBN:
Category : Education
Languages : en
Pages : 404
Book Description
Publisher:
ISBN:
Category : Education
Languages : en
Pages : 404
Book Description
Time
Author: Edmund Hodgson Yates
Publisher:
ISBN:
Category : English periodicals
Languages : en
Pages : 780
Book Description
Publisher:
ISBN:
Category : English periodicals
Languages : en
Pages : 780
Book Description
The Shock and Vibration Bulletin
Author:
Publisher:
ISBN:
Category : Shock (Mechanics)
Languages : en
Pages : 556
Book Description
Publisher:
ISBN:
Category : Shock (Mechanics)
Languages : en
Pages : 556
Book Description