Author: E. T. Fick
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description

Author: Eric Thomas Fick
Publisher:
ISBN:
Category : Aerodynamics, Supersonic
Languages : en
Pages : 0

Get Book Here

Book Description

Author: Eric Thomas Fick
Publisher:
ISBN:
Category : Aerodynamics, Supersonic
Languages : en
Pages : 276

Get Book Here

Book Description

Author: Alexander J. Smits
Publisher: Springer Science & Business Media
ISBN: 0387263055
Category : Science
Languages : en
Pages : 418

Get Book Here

Book Description
A good understanding of turbulent compressible flows is essential to the design and operation of high-speed vehicles. Such flows occur, for example, in the external flow over the surfaces of supersonic aircraft, and in the internal flow through the engines. Our ability to predict the aerodynamic lift, drag, propulsion and maneuverability of high-speed vehicles is crucially dependent on our knowledge of turbulent shear layers, and our understanding of their behavior in the presence of shock waves and regions of changing pressure. Turbulent Shear Layers in Supersonic Flow provides a comprehensive introduction to the field, and helps provide a basis for future work in this area. Wherever possible we use the available experimental work, and the results from numerical simulations to illustrate and develop a physical understanding of turbulent compressible flows.

Author: A. J. Laderman
Publisher:
ISBN:
Category : Aerodynamics, Supersonic
Languages : en
Pages : 182

Get Book Here

Book Description
Measurements of mean flow profiles at several streamwise locations in a supersonic turbulent boundary layer growing under a continuous adverse pressure gradient are reported. Tests were performed at a freestream Mach number of 3, for an adiabatic wall, using two curved ramps designed to produce constant pressure gradient flows. The velocity profile data, when transformed to incompressible coordinates, are in good agreement with Coles universal 'wall-wake' velocity profile and they indicate that the boundary layer is in local equilibrium and essentially independent of upstream history. In addition, the Coles wake parameters and Clauser shape factors, characterizing the transformed profiles, are in accord with the results of low speed correlations of adverse pressure gradient flows. The turbulent transport terms were extracted from the mean flow field data and indicate that for a given ramp, the profile of turbulent shear stress normalized by the wall shear, versus distance from the surface, normalized by the local boundary thickness, is severely distored by the pressure gradient although it is apparently insensitive to local conditions.

Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 26

Get Book Here

Book Description

Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781721518654
Category :
Languages : en
Pages : 38

Get Book Here

Book Description
The results from direct numerical simulations of a spatially evolving, supersonic, flat-plate turbulent boundary-layer flow, with free-stream Mach number of 2.25 are presented. The simulated flow field extends from a transition region, initiated by wall suction and blowing near the inflow boundary, into the fully turbulent regime. Distributions of mean and turbulent flow quantities are obtained and an analysis of these quantities is performed at a downstream station corresponding to Re(sub x)= 5.548 x10(exp 6) based on distance from the leading edge. Gatski, T. B. and Erlebacher, G. Langley Research Center NASA/TM-2002-211934, NAS 1.15:211934, L-18225

Author: Alvin L. Murray
Publisher:
ISBN:
Category : Boundary layer (Meteorology)
Languages : en
Pages : 92

Get Book Here

Book Description
An implicit finite-difference method was used to solve the compressible boundary-layer equations, and to study the effects of mass transfer through porous plates, slots, and a combination of the two. The effects of the external pressure field were also included by using a global pressure interaction scheme. Two different eddy viscosity models were used for the slot and slot-porous combination cases: one was a two-layer model with inner and outer laws, and the other was a multi-layer model with as many as five separate layers. Results of the present method were compared with experimental data at a Mach number of 2.8. Comparisons of the skin friction reduction and Mach number profiles gave good to excellent agreement. Pressure interaction had little effect on the slot injection skin friction but increased the skin friction of the porous and slot-porous combination markedly.

Author: E. R. Van Driest
Publisher:
ISBN:
Category : Aerodynamics, Supersonic
Languages : en
Pages : 108

Get Book Here

Book Description
Experiments carried out in the 12-inch supersonic wind tunnel to investigate the effect of three dimensional roughness elements (spheres) on boundary-layer transition on a 10-degree (apex angle) cone without heat transfer are described. The local Mach number for these tests was 2.71. The data show clearly that the minimum (effective) size of trip required to bring transition to its lowest Reynolds number varies power of the distance from the apex of the cone to the trip. Use of available data at other Mach numbers indicates that the Mach number influence for effective tripping is taken into account by a simple expression. Some remarks concerning the roughness variation for transition on a blunt body are made. Finally, a general criterion is introduced which gives insight to the transition phenomenon and anticipates effects of external and internal disturbances, Mach number transfer.

Author: Robert L. P. Voisinet
Publisher:
ISBN:
Category : Fluid mechanics
Languages : en
Pages : 144

Get Book Here

Book Description
The results of a detailed experimental investigation of the compressible turbulent boundary layer in a favorable-pressure-gradient flow are presented for zero, moderate and severe heat-transfer conditions. The studies were conducted on a flat nozzle wall at momentum thickness Reynolds numbers from 6,700 to 56,000 and at three wall-to-adiabatic-wall temperature ratios. An attempt was made to hold values of Clauser's pressure-gradient parameter constant. Complete profile measurements were taken with Pitot pressure probes and conical-equilibrium and fine-wire temperature probes. (Modified author abstract).