Author: Deepak Kumar Fulwani
Publisher: Springer
ISBN: 981102071X
Category : Technology & Engineering
Languages : en
Pages : 124
Get Book Here
Book Description
This book focuses on the mitigation of the destabilizing effects introduced by constant power loads (CPLs) in various non-isolated DC/DC converters and island DC microgrids using a robust non-linear sliding mode control (SMC) approach. This book validates theoretical concepts using real-time simulation studies and hardware implementations. Novel sliding mode controllers are proposed to mitigate negative impedance instabilities in DC/DC boost, buck, buck-boost, bidirectional buck-boost converters, and islanded DC microgrids. In each case, the condition for the large-signal stability of the converter feeding a CPL is established. An SMC-based nonlinear control scheme for an islanded DC microgrid feeding CPL dominated load is proposed so as to mitigate the destabilizing effect of CPL and to ensure system stability under various operating conditions. A limit on CPL power is also established to ensure system stability. For all proposed solutions, simulation studies and hardware implementations are provided to validate the effectiveness of the proposed sliding mode controllers.
Author: Xin Zhang
Publisher: Springer Nature
ISBN: 9811991154
Category : Technology & Engineering
Languages : en
Pages : 247
Get Book Here
Book Description
This book is devoted to the optimum design of the DCT in a hybrid AC/DC microgrid, which takes into account not only the influence of different inductors/capacitors values, but also numerous design goals (i.e., VCG, efficiency, stability and so on). This book examines the DCT's design problem in detail. It begins by reviewing existing DCTs in, the hybrid AC/DC microgrid and their design problems. Following that, this book proposes a family of DCT optimization design approaches to ensure that the designed DCT has good power transmission and voltage regulation ability in the hybrid AC/DC microgrid, even when the actual inductors/capacitors values fluctuate with practical power and temperature. Following that, this book provides a family of multi-objective optimization design methodologies for the DCT to guarantee that it concurrently achieves the requirements of VCG, efficiency, and system stability. This book also covers how to control the DCT in a hybrid AC/DC microgrid optimally and generically.
Author: M. M. Eissa
Publisher: Academic Press
ISBN: 0128145617
Category : Technology & Engineering
Languages : en
Pages : 234
Get Book Here
Book Description
Medium Voltage Direct Current Grid is the first comprehensive reference to provide advanced methods and best practices with case studies to Medium Voltage Direct Current Grid (MVDC) for Resilience Operation, Protection and Control. It also provides technical details to tackle emerging challenges, and discuss knowledge and best practices about Modeling and Operation, Energy management of MVDC grid, MVDC Grid Protection, Power quality management of MVDC grid, Power quality analysis and control methods, AC/DC, DC/DC modular power converter, Renewable energy applications and Energy storage technologies. In addition, includes support to end users to integrate their systems to smart grid. - Covers advanced methods and global case studies for reference - Provides technical details and best practices for the individual modeling and operation of MVDC systems - Includes guidance to tackle emerging challenges and support users in integrating their systems to smart grids
Author: José Gabriel Oliveira Pinto
Publisher: MDPI
ISBN: 3039283588
Category : Technology & Engineering
Languages : en
Pages : 336
Get Book Here
Book Description
Power quality (PQ) is receiving more and more attention from consumers, distribution system operators, transmission system operators, and other entities related to electrical power systems. As PQ problems have direct implications for business productivity, causing high economic losses, the research and development monitoring technologies and power electronics solutions that ensure the PQ of the power systems are matters of utmost importance. This book is a collection of high quality papers published in the “Power Electronics and Power Quality” Special Issue of the journal Energies. It reflects on the latest investigations and the new trends in this field.
Author: Antonio Carlos Zambroni de Souza
Publisher: Springer Nature
ISBN: 3030908127
Category : Technology & Engineering
Languages : en
Pages : 523
Get Book Here
Book Description
This book offers a broad and detailed view about how traditional distribution systems are evolving smart/active systems. The reader will be able to share the view of a number of researchers directly involved in this field. For this sake, philosophical discussions are enriched by the presentation of theoretical and computational tools. A senior reader may incorporate some concepts not available during his/her graduation process, whereas new Engineers may have contact with some material that may be essential to his/her practice as professionals.
Author: Andreu Cecilia
Publisher: Springer Nature
ISBN: 3031389247
Category : Technology & Engineering
Languages : en
Pages : 235
Get Book Here
Book Description
This book reports on a set of advances relating to nonlinear observer design, with a special emphasis on high-gain observers. First, it covers the design of filters and their addition to the observer for reducing noise, a topic that has been so far neglected in the literature. Further, it describes the adaptive re-design of nonlinear observers to reduce the effect of parametric uncertainty. It discusses several limitations of classical methods, presenting a set of successfull solutions, which are mathematically formalised through Lyapunov stability analysis, and in turn validated via numerical simulations. In the second part of the book, two applications of the adaptive nonlinear observers are described, such in the estimation of the liquid water in a hydrogen fuel cell and in the solution of a common cybersecurity problem, i.e. false data injection attacks in DC microgrids. All in all, this book offers a comprehensive report on the state-of-the-art in nonlinear observer design for energy systems, including mathematical demonstrations, and numerical and and experimental validations.
Author: Sedigheh Rabiee
Publisher: BoD – Books on Demand
ISBN: 3946143091
Category : Technology & Engineering
Languages : en
Pages : 401
Get Book Here
Book Description
The assembly of this study started in 2013 during the preparation of the foundation of the Flexible Electrical Networks (FEN) Research Campus, an institution supported by the German Federal Ministry of Education and Science, concentrating on DC technology in power grids as an enabler for the energy transition. It reflects the state-of-the-art and research needs of DC technology against the background of application in public grids up until the year 2015. Topics as components, control, management and automation, high-, medium, and low-voltage grid concepts as well as social dimensions, economics, and impact on living beings are considered. After substantial editorial effort, its first public edition has become ready now. The aim of FEN is to investigate and to develop flexible power grids. Such grid will safeguard the future energy supply with a high share of fluctuating and decentralized renewable energy sources. At the same time, these grids will enable a reliable and affordable energy supply in the future. The objective is to provide new technologies and concepts for the security and quality of the energy supply in the transmission and distribution grids. To pursue this goal, the use of direct-current (DC) technology, based on power electronics, automation and communication technologies, plays an important role. Although DC technology is not yet established as a standard technology in the public electrical power supply system, its high potential has been widely recognized. The use of DC is an enabler to make the future energy supply system more economical than a system based on alternating-current (AC), because of its superior properties in handling distributed and fluctuation power generation. Indeed, DC connections are already the most cost-efficient solution in cases of very high-power long-distance point-to-point transmission of electricity or via submarine cables. The objective of the FEN Research Campus is now to achieve and demonstrate feasibility of DC as a standard solution for future electrical grids, as described in this study.
Author: Andrei-Constantin Braitor
Publisher: Springer Nature
ISBN: 3030954153
Category : Technology & Engineering
Languages : en
Pages : 185
Get Book Here
Book Description
This book introduces several novel contributions into the current literature. Firstly, given that microgrid topologies are paramount in theoretical analysis, the author has proposed a rigorous method of computing the network’s admittance matrix and developed to facilitate the stability analysis of DC microgrids supplying nonlinear loads. This unique approach enabled the factorisation of the admittance matrix in a particular way that facilitates a rigorous theoretical analysis for deriving the stability conditions. Secondly, author has proposed a unified control structure at the primary control layer that maintains the widely accepted droop-based approaches and additionally ensures crucial current- and voltage-limiting properties, thus offering an inherent protection to distributed energy resources. He has formalised the control design proofs using Lyapunov methods and nonlinear ultimate boundedness theory, for both parallel and meshed microgrid configurations. Moreover, he has developed a distributed secondary controller using a diffusive coupling communication network, on top of the primary control, to achieve voltage restoration and improve the power sharing. In this way, the author has formulated the complete hierarchical control scheme. In this high-order nonlinear setting, he has analytically proven closed-loop system stability of the overall system, for the first time, using two-time scale approaches and singular perturbation theory, by formulating rigorous theorems that introduce straightforward conditions that guide the system and control design and demonstrate system stability at the desired equilibrium point. In addition, the author has provided a straightforward algorithm for simple testing of system stability and explored from a graphical perspective by giving an interpretation to the effect of the nonlinear load onto the system performance and stability.
Author:
Publisher:
ISBN:
Category : Dissertations, Academic
Languages : en
Pages : 810
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 10
Get Book Here
Book Description
