Author: Avco-Everett Research Laboratory
Publisher:
ISBN:
Category : Magnetohydrodynamic generators
Languages : en
Pages : 122
Book Description
The overall objectives of this program are the design, fabrication and delivery of test channels (nozzle, channel, diffuser, instrumentation and controls, and all necessary facility service connections) to the CDIF (Component Development and Integration Facility) for MHD generator tests. These CDIF test channels will be driven by a coal combustor which is under development at PERC in parallel with this program. Progress is reported on the following tasks: (1) Conduct basic engineering tests and perform necessary analytical work to define preferred design configurations of the CDIF channel in relation to fluid dynamics and electrodynamic performance. (2) Conduct basic engineering tests and perform necessary analytical work to define preferred electrode module design, side wall construction, wall materials, and fabrication methods for a high performance, durable MHD channel. (3) Conduct basic engineering tests and perform necessary analytical work to define instrumentation and controls and preferred inverter systems and/or channel electrical controls in relation to inverter requirements and operating stability. (4) Determine basic performance capability of the disk generator design under conditions simulating an open cycle MHD plasma. (5) Maintain continuous design and engineering liaison with the Pittsburgh Energy Research Center (PERC) in the development of the two stage CDIF coal combustor. Ensure design compatibility of the integrated combustor-generator system. Design, build, and deliver to PERC an instrumented test section to assist in the design and performance evaluation of the PERC subscale 5 MWt experimental combustor. Obtain quantitative chemical and physical data on relevant coal slags with the PERC experimental combustor. (6) Conduct necessary bench tests to establish essential design information on fluid dynamic, heat transfer, and current transfer characteristics of selected MHD coal slags.
MHD generator component development
Author: Avco-Everett Research Laboratory
Publisher:
ISBN:
Category : Magnetohydrodynamic generators
Languages : en
Pages : 122
Book Description
The overall objectives of this program are the design, fabrication and delivery of test channels (nozzle, channel, diffuser, instrumentation and controls, and all necessary facility service connections) to the CDIF (Component Development and Integration Facility) for MHD generator tests. These CDIF test channels will be driven by a coal combustor which is under development at PERC in parallel with this program. Progress is reported on the following tasks: (1) Conduct basic engineering tests and perform necessary analytical work to define preferred design configurations of the CDIF channel in relation to fluid dynamics and electrodynamic performance. (2) Conduct basic engineering tests and perform necessary analytical work to define preferred electrode module design, side wall construction, wall materials, and fabrication methods for a high performance, durable MHD channel. (3) Conduct basic engineering tests and perform necessary analytical work to define instrumentation and controls and preferred inverter systems and/or channel electrical controls in relation to inverter requirements and operating stability. (4) Determine basic performance capability of the disk generator design under conditions simulating an open cycle MHD plasma. (5) Maintain continuous design and engineering liaison with the Pittsburgh Energy Research Center (PERC) in the development of the two stage CDIF coal combustor. Ensure design compatibility of the integrated combustor-generator system. Design, build, and deliver to PERC an instrumented test section to assist in the design and performance evaluation of the PERC subscale 5 MWt experimental combustor. Obtain quantitative chemical and physical data on relevant coal slags with the PERC experimental combustor. (6) Conduct necessary bench tests to establish essential design information on fluid dynamic, heat transfer, and current transfer characteristics of selected MHD coal slags.
Publisher:
ISBN:
Category : Magnetohydrodynamic generators
Languages : en
Pages : 122
Book Description
The overall objectives of this program are the design, fabrication and delivery of test channels (nozzle, channel, diffuser, instrumentation and controls, and all necessary facility service connections) to the CDIF (Component Development and Integration Facility) for MHD generator tests. These CDIF test channels will be driven by a coal combustor which is under development at PERC in parallel with this program. Progress is reported on the following tasks: (1) Conduct basic engineering tests and perform necessary analytical work to define preferred design configurations of the CDIF channel in relation to fluid dynamics and electrodynamic performance. (2) Conduct basic engineering tests and perform necessary analytical work to define preferred electrode module design, side wall construction, wall materials, and fabrication methods for a high performance, durable MHD channel. (3) Conduct basic engineering tests and perform necessary analytical work to define instrumentation and controls and preferred inverter systems and/or channel electrical controls in relation to inverter requirements and operating stability. (4) Determine basic performance capability of the disk generator design under conditions simulating an open cycle MHD plasma. (5) Maintain continuous design and engineering liaison with the Pittsburgh Energy Research Center (PERC) in the development of the two stage CDIF coal combustor. Ensure design compatibility of the integrated combustor-generator system. Design, build, and deliver to PERC an instrumented test section to assist in the design and performance evaluation of the PERC subscale 5 MWt experimental combustor. Obtain quantitative chemical and physical data on relevant coal slags with the PERC experimental combustor. (6) Conduct necessary bench tests to establish essential design information on fluid dynamic, heat transfer, and current transfer characteristics of selected MHD coal slags.
MHD Generator Component Development
Author: Avco-Everett Research Laboratory
Publisher:
ISBN:
Category : Magnetohydrodynamic generators
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category : Magnetohydrodynamic generators
Languages : en
Pages :
Book Description
MHD Generator Component Development
Author: Avco-Everett Research Laboratory
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
MHD Generator Component Development
Author: Avco-Everett Research Laboratory
Publisher:
ISBN:
Category : Magnetohydrodynamic generators
Languages : en
Pages : 0
Book Description
The overall objectives of this program are the design, fabrication and delivery of test channels (nozzle, channel, diffuser, instrumentation and controls, and all necessary facility service connections) to the CDIF (Component Development and Integration Facility) for MHD generator tests. These CDIF test channels will be driven by a coal combustor which is under development at PERC in parallel with this program. Progress is reported on the following tasks: (1) Conduct basic engineering tests and perform necessary analytical work to define preferred design configurations of the CDIF channel in relation to fluid dynamics and electrodynamic performance. (2) Conduct basic engineering tests and perform necessary analytical work to define preferred electrode module design, side wall construction, wall materials, and fabrication methods for a high performance, durable MHD channel. (3) Conduct basic engineering tests and perform necessary analytical work to define instrumentation and controls and preferred inverter systems and/or channel electrical controls in relation to inverter requirements and operating stability. (4) Determine basic performance capability of the disk generator design under conditions simulating an open cycle MHD plasma. (5) Maintain continuous design and engineering liaison with the Pittsburgh Energy Research Center (PERC) in the development of the two stage CDIF coal combustor. Ensure design compatibility of the integrated combustor-generator system. Design, build, and deliver to PERC an instrumented test section to assist in the design and performance evaluation of the PERC subscale 5 MWt experimental combustor. Obtain quantitative chemical and physical data on relevant coal slags with the PERC experimental combustor. (6) Conduct necessary bench tests to establish essential design information on fluid dynamic, heat transfer, and current transfer characteristics of selected MHD coal slags.
Publisher:
ISBN:
Category : Magnetohydrodynamic generators
Languages : en
Pages : 0
Book Description
The overall objectives of this program are the design, fabrication and delivery of test channels (nozzle, channel, diffuser, instrumentation and controls, and all necessary facility service connections) to the CDIF (Component Development and Integration Facility) for MHD generator tests. These CDIF test channels will be driven by a coal combustor which is under development at PERC in parallel with this program. Progress is reported on the following tasks: (1) Conduct basic engineering tests and perform necessary analytical work to define preferred design configurations of the CDIF channel in relation to fluid dynamics and electrodynamic performance. (2) Conduct basic engineering tests and perform necessary analytical work to define preferred electrode module design, side wall construction, wall materials, and fabrication methods for a high performance, durable MHD channel. (3) Conduct basic engineering tests and perform necessary analytical work to define instrumentation and controls and preferred inverter systems and/or channel electrical controls in relation to inverter requirements and operating stability. (4) Determine basic performance capability of the disk generator design under conditions simulating an open cycle MHD plasma. (5) Maintain continuous design and engineering liaison with the Pittsburgh Energy Research Center (PERC) in the development of the two stage CDIF coal combustor. Ensure design compatibility of the integrated combustor-generator system. Design, build, and deliver to PERC an instrumented test section to assist in the design and performance evaluation of the PERC subscale 5 MWt experimental combustor. Obtain quantitative chemical and physical data on relevant coal slags with the PERC experimental combustor. (6) Conduct necessary bench tests to establish essential design information on fluid dynamic, heat transfer, and current transfer characteristics of selected MHD coal slags.
MHD Generator Component Development
Author: Avco-Everett Research Laboratory
Publisher:
ISBN:
Category :
Languages : en
Pages : 6
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 6
Book Description
MHD Generator Component Development
Author: Avco-Everett Research Laboratory
Publisher:
ISBN:
Category :
Languages : en
Pages : 101
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 101
Book Description
Fossil Energy Update
Author:
Publisher:
ISBN:
Category : Fossil fuels
Languages : en
Pages : 1052
Book Description
Publisher:
ISBN:
Category : Fossil fuels
Languages : en
Pages : 1052
Book Description
Staff Report on MHD Technology
Author: United States. Congress. House. Committee on Science and Technology. Subcommittee on Fossil and Nuclear Energy Research, Development, and Demonstration
Publisher:
ISBN:
Category : Electric power production
Languages : en
Pages : 100
Book Description
Publisher:
ISBN:
Category : Electric power production
Languages : en
Pages : 100
Book Description
Energy Research Abstracts
Author:
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 906
Book Description
Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 906
Book Description
Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Monthly Catalog of United States Government Publications
Author: United States. Superintendent of Documents
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1220
Book Description
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1220
Book Description